bing tracking image
  1. RV Roof Repair
  2. LaSalle Bristol
  3. Sealant
  4. White
  5. Self-Leveling
  6. 10.1 oz
LaSalle Bristol XTRM Universal Self-Leveling Sealant - White - 10.1 oz - Qty 1

LaSalle Bristol XTRM Universal Self-Leveling Sealant - White - 10.1 oz - Qty 1

Item # 34427034145-1
Our Price: $22.52
RV Roof Repair
Shipping Weight: 1 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Seal the skylights, vents, and other horizontal surfaces of your RV roof with this self-leveling sealant. Solvent-based formula works with aluminum, glass, and all roof membranes, and it doesn't require primer. Remains flexible for RV travel. Great Prices for the best rv roof repair from LaSalle Bristol. LaSalle Bristol XTRM Universal Self-Leveling Sealant - White - 10.1 oz - Qty 1 part number 34427034145-1 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (302)
  • Q & A (0)
  • Photos

LaSalle Bristol RV Roof Repair - 34427034145-1

  • Sealant
  • White
  • Self-Leveling
  • LaSalle Bristol
  • 10.1 oz

Seal the skylights, vents, and other horizontal surfaces of your RV roof with this self-leveling sealant. Solvent-based formula works with aluminum, glass, and all roof membranes, and it doesn't require primer. Remains flexible for RV travel.


Features:

  • Self-leveling sealant seals the roof membrane edges, skylights, vents, and other horizontal surfaces of your RV
    • Adheres to aluminum, brass, steel, glass, mortar, wood, PVC, EPDM, TPO, and TPV
    • Self-leveling settles for a low-profile seam
  • Solvent-based formula provides an extra-strong, flexible seal
    • Doesn't require primer
    • Remains flexible for the movement of RV travel
  • Longer dry time is best for fine touches and proper tooling - 1 to 2 hours, then ready for the road
    • Applies with a standard caulking gun
    • Can be painted once cured
  • White color matches your RV


Specs:

  • Coverage: 30' at 1/4" bead
  • Shelf life: 18 months
  • Quantity: (1) 10.1 oz tube


RV Sealant - Non-Sag vs Self-Leveling

The kind of sealant you apply to your RV is important. To determine the type of sealant you need for your application, you will want to consider what it is you are sealing and where it is on your RV.


Self-leveling sealant is designed to level out as you apply it. The thick liquid slowly flows into a level position as gravity takes effect. This is particularly useful when sealing flat surfaces, like around a roof vent, AC, or skylight. As you apply the sealant, gravity will cause it to settle into an even line, giving you a clean, low-profile look.


Non-sag sealant is designed to retain its shape as you apply it. The consistency of the liquid is thick but malleable enough to be easily applied without causing sagging or slumping. This is useful when sealing vertical surfaces, such as the edges of a wall, window, or vent. As you apply the sealant, it will harden just enough to keep the liquid from drooping, giving you a clean, even look.



34427034145 LaSalle Bristol XTRM Universal Self-Leveling Sealant - 10.1 oz - White - Qty 1





Customer Satisfaction Score:


Customer Reviews

LaSalle Bristol XTRM Universal Self-Leveling Sealant - White - 10.1 oz - Qty 1 - 34427034145-1

Average Customer Rating:  4.6 out of 5 stars   (302 Customer Reviews)

Seal the skylights, vents, and other horizontal surfaces of your RV roof with this self-leveling sealant. Solvent-based formula works with aluminum, glass, and all roof membranes, and it doesn't require primer. Remains flexible for RV travel.

by: 01/05/2024

Worked well for a year, a little noise in bushings, However, just this week, 15 months after install, the fan began to turn on by itself: and via the control panel would sometimes turn off when I pressed the power button, but had to disconnect the power, then re-connect, and would be okay, but now it just stays on at a high speed when connected to power.

> Now it just turns on when I connect power, and none of the control panel buttons do anything.
>
> It is connected to 12 V system 2 100 ah lithium batteries to buss bar fuse box.
>
Wow, ad for over $200, you would think this thing would be a bit more resilient, What a shame, cheap manufacturing, for great earnings for Maxxfan executives.

> What can be done to fix this control panel issue?



by:

You give us the info we need to know in order to make good decisions, we have never been disappointed with our purchases! Keep up the good work.



by:

Easy to use. Self leveling.



by:

Produce was junk ,11.5" tube shippid in a 10" box .tube nozzle broke contains inside case .thanks for nothing 15 days to get it an



by:

Not the review you want. I am a tech who purchased and installed for a client. They can not called to complain so I suppose it is fine.



by:

Great product. Easy application and sea ling.



by:

This product was awesome. Shipping and packaging could be a lot better. No tracking number and damaged product when it arrived not due to shipping but packaging.

Etrailer Expert

Jenny N.

7/23/2023

Well that is not what we want to hear. I will have our Customer Service team reach out to you.



by:

Great communication thru the whole ordering and shipping process, so important these days.



by:

Very fast shipping thank you very much that's why I like doing business with you guys.



by:

Great job in replacing the damaged tube of x-treme sealant.There was never a question just an effort to satisfy my needs. Thanks



by:

Just what I needed. Thank you.



by:

Item was delivered on time. I have not used it yet but from previous reviews online I am sure I will have no problem using it to seal a new MaxAir fan that I have also ordered from E-Trail



by:

This was thicker and more difficult to apply than I had anticipated. That said, I do think it worked ok to caulk around the refrigerator vent on an old camper trailer I have. It was an unusually cold day when I applied it so that may have contributed to my difficulties.



by:

Great customer service!



by:

Great product



by:

Installed a new 14 x 14 ceiling vent. There was enough product in this tube to adequately seal around the entire vent. It did "self-level". The application is smooth and sealed. It set up for several days out of the weather adn we did not experience any visible leaks inside during or after an extreme thunderstorm.



by:

I read the instructions, followed what they said to do and I had great results. No leaks Thank you so much!!



by:

Good caulk



by:

This product was once my go to for lap sealant but doesn't flow out like it once did.

Etrailer Expert

Jenny N.

12/28/2022

I recommend setting the sealant tube in warm or hot water to allow it to loosen up before using. It may allow it to flow better.



by:

Good sealant



by:

Shipping was exactly what was noted all the products were exactly as ordered have yet to use them thank you e-trailer



by:

Really happy with the items great customer service



by:

Great product , would recommend over using silicone any day



by:

Really impressed with how shipment progress is displayed! Will be a repeating customer!



by:

This was a great lap sealant at one point but doesn't flow out nice like it once did.


25
302
Show More Reviews

See what our Experts say about this LaSalle Bristol RV Roof Repair

  • Can The MaxxAir MaxxFan Mini Roof Vent Replace A Fan-Tastic 1200 Series RV Roof Vent
    The MaxxAir MaxxFan Mini Roof Vent # MA00-04401M is a 14" x 14" vent just like your Fan-Tastic 1200 series roof vent so you'll have no problem swapping it out. This vent will come with screws to mount it but you'll want to pick up some butyl tape # AL28FJ and a couple tubes self leveling sealant # 34427034145-1 for waterproofing.
    view full answer...
  • Recommended MaxxAir MaxxFan Deluxe For A 2023 Entegra Odyssey Bathroom
    I've installed more vents than I can count all to separate switches already built into the trailer or motorhome and not once had a single issue with voltage spikes. I have however ran into situations where the vent and another appliance were both ran to the same switch and had too high of a draw when both were being used at the same time, causing the circuit to overload. Running the vent with less than 12 volts is the more likely case for circuit board issues. When MaxxAir vents are turned...
    view full answer...
  • Recommended Lithium Compatible Converter Section Replacement For A WFCO8955
    The PD4655LIV unfortunately is no longer in production you'll need the Progressive Dynamics Replacement Section for AC/DC Power Distribution Panel # PD4655V instead. This will also simply replace the converter section of your current power center and has a lithium jumper on the circuit board to adjust your charging profile from lead acid to lithium. As for the solar, this system is going to be completely independent from the your power center. Solar begins at the panels up on the roof...
    view full answer...
  • Will Ventline Ventadome Trailer Roof Vent Fit 14 x 14 Opening
    All trailer roof vents nowadays fit what is referred to as a standard roof vent opening, which is described as "roughly" 14-1/4" x 14-1/4" so the Ventline Ventadome Trailer Roof Vent # V2110SP-24 might be able to squeeze into a 14" x 14" opening but in reality it is pretty situational as most openings aren't exactly 14" x 14" or 14-1/4" by 14-1/4" because of the minute nature of the measurement. So it is a possibility you will need to trim the opening of your roof ever so slightly to get...
    view full answer...
  • Should You Remove Old Sealant Or Can You Add More On Top Of It
    It's always best to remove the old sealant first and then clean the area with soap and water to ensure a secure grip for the LaSalle Bristol XTRM Universal Self-Leveling Sealant # 34427034145-1. The old sealant could deteriorate and fall off taking the new sealant with it.
    view full answer...
  • Recommended Roof Vent For An Enclosed Trailer With A 1/4" Thick Roof
    Hey Jesse, The square vents we offer all require a 14" x 14" opening in order to be installed. You can always add in some wood to increase the thickness of the roof but the hole size is going to be something that has to be right. With it being an enclosed trailer you can easily cut the roof to make the correct size hole. The lift arms on vents like the # V2110SP-24 you were looking at are weak and break often so I recommend going with the MaxxFan Mini Plus Manual RV Roof Vent w/ 12V Fan...
    view full answer...
  • How Long Does LaSalle Bristol XTRM Take to Cure
    LaSalle Bristol has told us that their XTRM sealant part # 34427034145-1 that you referenced cures in an hour but if yours is still very soft I would not say it's cured. I would give it 24 hours if you plan to paint it.
    view full answer...
  • Removal of Old Adhesive and Dicor
    When installing new Rubber Wiper Seal and Bulb for RV Slide Out, # SR48FR, remove the old adhesive using a putty knife or other tool with an edge to scrap. If you use a metal tool sometimes heating it will assist in the scrapping and removal. The use of mineral spirits is frequently a good way to get the sealant’s adhesive to release. Once your parts are replaced, if you reapply new sealant be certain to use the correct product. Self-leveling sealant is designed to level out as you...
    view full answer...
  • What Size Hole Is Needed To Install The Jensen Pull Up Antenna # AN110
    The Jensen Pull Up Antenna # AN110 isn't designed to be mounted through an exterior hole in your RV. It comes with a mounting bracket that you would screw onto the RV with some self-tapping screws and then hook the antenna to. If you're routing the coax cable inside then you would need to drill a 3/8" hole for the cable to pass through. If you drill this hole on the roof you'll want to cover the hole with some self-leveling sealant # 34427034145-1. If you drill the hole through the wall...
    view full answer...
  • Replacement Vent Lid For Horse Trailer With Jensen Metal Vent Base
    You will need the Camco Replacement Lid # CAM40153. The images you sent show me you have the Jensen hinge for metal vent base. It appears you will want to apply some more Self-Leveling Sealant # 34427034145-1 around the vent as well. This will help prevent water from getting in around the screw holes or the base of the vent. You will want to clean the roof area really good around the vent and remove any loose sealant you already have. It is okay if you do not pull up all the old sealant...
    view full answer...
    Image 1 for Image 2 for
  • Is LaSalle Bristol XTRM Sealant Available ib Black and will it Work With Spray In Bedliner?
    The LaSalle Bristol XTRM Universal Self-Leveling Sealant is compatible with the spray in bed liner material. They only produce two colors unfortunately and they are white and beige these part numbers are linked below. White part # 34427034145-1 Beige part # 34427034146-1
    view full answer...
  • Recommended Replacement Roof Vents For A 1999 National Sea Breeze Class A Motorhome
    For the vents there are quite a few options so it really just depends on what features you'd prefer to have. My personal favorites are the MaxxFan Deluxe Roof Vent w/ 12V Fan # MA00-07500K and the MaxxFan Mini Plus Manual RV Roof Vent w/ 12V Fan # MA00-03851 for when there isn't enough room on the roof for the curved lid of the Deluxe. Both of these vents have a lid that allows them to function during inclement weather and while driving, unlike most other roof vents. I've seen too many...
    view full answer...
  • How to Remove Screen From Ventline Vanair Trailer Roof Vent
    To remove the screen on the Ventline Vanair Trailer Roof Vent # VP-543SP you will first need to remove the screw from either side of the handle, remove the handle, and then remove the screws that hold the vent in place. Be careful when you lower the vent as that switch will still be connected to wires. You can either disconnect the wires or choose to leave them connected while you clean (carefully). To replace the gasket that came with the vent you can use the Sealant # 34427034145-1 which...
    view full answer...
  • How To Reverse Airflow Direction With A MaxxAir MAxxFan Plus RV Roof Vent
    On older models of RV roof vents you used to be able to just reverse the wiring to have the motor run in the reverse direction. With the current models of the MaxxAir MaxxFan, including the MaxxFan Plus Roof Vent w/ 12V Fan # MA00-04000K this feature is already programmed into the controller so that you don't have to change the wiring. Simply press the button (pictured below) to switch between pulling air in or out of the trailer. These vents will come with mounting screws but do not...
    view full answer...
    Image 1 for
  • Will the Fan-Tastic Vent Roof Vent FV800900 Replace A Fan-Tastic Vent Roof Vent FV802250
    The Fan-Tastic Vent RV or Trailer Roof Vent part # FV800900 installs in the same size opening as the Fan-Tastic Vent Roof Vent w/ 12V Fan part # FV802250 therefore you don't need to worry about measuring as it will fit your 14" x 14" opening just fine. The measurements can vary slightly depending on where they are taken so the 1/4" discrepancy is not anything you need to worry about. If you don't already have any sealant you can use part # 34427034145-1 for this.
    view full answer...
  • Installation Hardware to Install a Refrigerator Vent Cover
    The RV Refrigerator Roof Vent Cap and Base # DMC37FR comes with the vent cap and the base. Installation hardware is not included. We do have installation hardware available. The Camco RV Vent Installation Kit # CAM25013 if you have a rubber roof or the Camco RV Vent Installation Kit # CAM25003 if you have a metal roof. You would also want some LaSalle Bristol XTRM Universal Self-Leveling Sealant # 34427034145-1. We also have the Roof Vent Installation Kit # 344270KITW which includes the...
    view full answer...
  • Camper Roof Rack Options for 2013 Jay Flight Swift with Rounded Edges
    If you don't have squared edges on your 2013 Jay Flight Swift camper for the SportRack Pop-Up Camper Roof Rack # SR1020 to install then you will want to look at another roof rack that is compatible with your application. We have the Swagman Roamer LT # S80510 which is a completely custom option that you can install anywhere on your roof as well as the SeaSucker Monkey Bars Roof Rack # 298-SX6000B which uses vacuum cups to secure to the roof. The Swagman options are permanent roof racks...
    view full answer...
  • How To Apply The Alpha Systems 4034 Roof Coating To An RV Roof
    The rule of thumb here in most cases is, the smoother the surface and glossier the paint, the shorter the nap. With the roof of the trailer being fairly smooth a 3/4" or less nap would be the better option. The manufacturer recommends a 5/16" or less nap or to use a paint brush. There's a lot of debate about sliding the roller or actually letting it roll. In my opinion sliding the roller will lead to uneven coating since you're more so just pushing the sealant around. Keeping an even...
    view full answer...
  • Using XTRM Universal Sealant to Replace Existing Original XTRM Caulk on Roof
    I believe you are referring to the XTRM Universal Sealant # 34427034145-1. If so, it can absolutely be used in place of the original XTRM 100 that was on your roof. This will work just as well as the original sealant and its weather-resistant formula will keep it flexible and in good condition for many years. As far as removing the old caulk/sealant you should be able to get most of it up with a good ol'e fashioned putty knife. As for the stubborn sections that won't budge a really effective...
    view full answer...
  • Can A Maxxair Roof Vent Be added To A 2000 Starcraft Venture 1706 Pop Up Camper
    Adding a vent to your 2000 Starcraft Venture 1706 Pop Up camper requires a few things. The roof opening has to be at least 14" x 14" and the roof thickness has to be between 2" to 6-1/2" thick. If you are replacing a current vent you can remove the inside garnish to measure the opening. A few other things I recommend when installing a new fan. You need 2 of the LaSalle Bristol XTRM Universal Self-Leveling Sealant - White - Qty 1 Item # 34427034145-1. This is used to seal around the top...
    view full answer...
  • Recommended Replacement For A Ventline AS-13M RV Roof Vent
    An AS-13M is an older Ventline model so I recommend just replacing it with a MaxxFan Mini Plus Manual RV Roof Vent # MA00-03851. This powered vent features a rain shield that will allow you to use your vent in any weather or even while driving. The LED ring light will offer extra light to see in your trailer or just offer a nice accent. I do recommend picking up some Butyl Tape # 344270341410-1 and Self Leveling Sealant # 34427034145-1 to complete your installation as the vent will only...
    view full answer...
  • Replacement RV Refrigerator Roof Vent Options For A 2014 Keystone Hideout Travel Trailer
    We carry the Camco RV Refrigerator Vent Cover # CAM42160 (black # CAM42163) which is designed to fit a 26" long x 7-1/2" wide base. If your base dimensions differ then you'll need to replace the base as well with part number # CAM42161 (black # CAM42164). We also carry an all-in-one replacement with part # DMC97FR, which is designed to fit a 23-3/4" long x 6-3/4" wide cutout. If you have to replace the base I recommend picking up some butyl tape # AL28FJ for the bottom side of the mounting...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Solar Panel System For A 2015 Lance Travel Trailer
    You'll have two options when it comes to a two panel system: Option 1: Go Power Overlander Solar Charging System with Digital Solar Controller # GP39MR. These panels have a hard frame and would require you to drill into the roof of your trailer. They are 59-1/8" L x 26-5/16" W and provide up to 380 watts. Option 2: Go Power Solar Flex Charging System with Digital Solar Controller # 34272628. These panels have a soft, flexible base to fit curved surfaces and can be glued to the roof instead...
    view full answer...
  • What Sealant should I Use for Installing the RV Tub and Shower Diverter EM87FR?
    For sealant to use when installing the Empire Faucets Brass RV Tub and Shower Diverter # EM87FR, I recommend the LaSalle Bristol XTRM Universal Self-Leveling Sealant # 34427034145-1. The XTRM can be painted once it cures to match the color of your bath/shower. For greater ease of application, I recommend using a caulk gun # PTW54295.
    view full answer...


< Previous
123. . .5



Do you have a question about this RV Roof Repair?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Kathleen M
Video by:
Kathleen M
Employee Michael B
Video by:
Michael B
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Manda E
Updated by:
Manda E
Employee Amanda M
Edited by:
Amanda M
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Installed by:
Robert C
Employee Halie H
Written by:
Halie H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.