Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the printed circuit board and switch for your MaxxFan roof vents (MA00A04301K).
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello, everybody. This is Jeff at etrailer.com. Today, we're going to take a look at the Replacement Printed Circuit Board and the Switch for the MaxxFan Roof Vents. Now, this part will replace the printed circuit board and the switch on the MaxxFan Roof Vents. Part number FA00A043401K. It will also work with the models 4201KW, 4251KW, or the 4401KW.
If you notice it has the 2-pin plug-in connector on this one, and then two wire pigtails right here, a black and a white wire. But that should do it for the review on the Replacement Printed Circuit Board and Switch for the MaxxFan Roof Vents..
Average Customer Rating: 4.8 out of 5 stars (210 Customer Reviews)
Replaces the printed circuit board and switch for your MaxxFan roof vents (MA00A04301K).Part fit fine. The pigtail on the power side was extra long. The only negative about the order is the shipping. For the cost of the product and shipping charge the could use a professional service like UPS or FedEx. But they used the post office so it took two weeks to go 800 miles. I guess the post office is run by the Pony Express now.
Replaced controller on Maxxair fan model 4301K when the fan would not turn off. etrailer supplied an updated board (the lower of the boards shown in photo). Board installation went smoothly and fan now operates like new.
they only last about a year but cheaper and easier then installing a new ceiling fan
Exact replacement, very easy DIY install in just minutes.
Product arrived quickly. It worked perfectly. Really happy that I ordered from etrailer. Maxair fan switch quit working it was replaced works great now.
Perfect replacement for my failed MaxxFan circuit board. The old one failed, I think, due to moisture so I conformal coated this one before installation. I also put quick disconnect connectors on the power leads to make it easier to replace the next time.
Very satisfied. Easy to install. On hot summer days, I run the fan continuously and so far, no problems with the switch. I hope I didn’t just jinx myself!!
Wasn't sure why my Maxxfan quit, but researched and took a chance by replacing the circuit board and switch. Thx etrailer the fan now purrs and cools. Great product and service.
This item was perfect. No issues, quick shipment, and described well. I actually made a youtube video on the install. Youtube channel Coolest Life.
Would have been nice to know the product was out of stock before I placed the order. It took almost a month to arrive, other than that, very good after sale service with the updated emails! A bit pricey for parts with the shipping, Amazon is faster and cheaper in most cases. But I will definitely order again.
I was assured by the experts at E Trailer that the replacement 4 speed switch offered for my Maxx fan would work even though it it was not quite the same circuit board as the original ( which failed after only a few operations) in my Winnebago RV..The item was delivered in good condition and installed the next day...It works perfectly!...Thankyou
Item as described and fast delivery, couldn’t be more pleased with purchase. The circuit board was bad in my RV fan and the replacement from e-trailer worked perfectly.
Dick
5/10/2023
Great, easy to install and works perfectly.
Yes still working fine
Thank you
The part was exactly what I intended to order. It was delivered timely, and for a reasonable price. It has worked perfectly for a year now.
Got it in just a few days. Worked perfe ctly.
Great replacement. Still runs great and easy to wire in.
Daniel
7/30/2023
Still working great!
Physical form factor matched so no problem with install. Easy to wire up. Worked great.
Exact replacement, worked perfectly. One year in it is still working great.
Very good service!
Thanks
I think that my part come in good shape. If only the guy that put it new what l was doing. Put it in back wards an now the fan is draging so l have to take it back apart.
Works great! Perfect fit and easy insta ll.
Unit arrived very quickly. Install was fine and unit then powered up normally.
The "only issue" I would put here is that they should also supply 4 nylon flat washers, (which there were none from the "factory install") 1, To space the pcb on the standoffs, so when installed, there is zero pressure from the switches on the label for the fan control. without those, to much pressure and the switches will poke thru the label. And 2, insulation for the metal screws that mount the pcb to the frame, so as to not short the redesigned pcb. About .20 cents.
But otherwise As advertised Fan now works!!
Perfect fit. Easy install.
Perfect replacement for the faulty switch in my Airstream Nest roof fan. If you’re good with s screwdriver (11 screws total to access and replace the switch)
The new board resolved the issues, I added a buck converter to control max voltage, it would be better if the voltage regulation was built into the board. The Board by itself does not provide sufficient max voltage to be safe for RV use. Should provide for up to 24v Max voltage. Buck converter added $25 to the install.
DC Buck Converter 8v-40v to 12V 6a 72W Automatic Buck Boost Power Converter Regulator Waterproof Module Transformer
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jewell
5/11/2021
Still working great! Thanks