Remote Replacement Recommendation for MaxxAir Roof Vent MA00A04401K

Question

Question:

Would y’all have the remote control for the MaxxAir MaxxFan - Smoke part #MA00A04401K?

asked by: Steve L

0

Expert Reply:

We have the replacement remote part # MA00A01151K which is the correct remote for the vent assembly you mentioned part # MA00A04401K.

expert reply by: Jameson C

0

Answer 1

For the MaxxFan 4401K roof vent the correct lid is the part #MA10A40009K.

view full answer...

Answer 2

Yes, the replacement remote part #MA00A01150K would be exactly what you would need for a replacement remote for your roof vent #MA00-04500K.

view full answer...

Answer 3

The correct replacement remote for a MaxxAir MaxxFan 7500K is the Replacement Handheld Remote for Maxxair Roof Vent Intake/Exhaust Fans part #MA00A01150K not to be confused with the similar part #MA00A01151K.

view full answer...

Answer 4

The part #MA00-04751KSX you mentioned having does not have a remote control. Is it possible you have a different MaxxFan? If the remote looks like the part #MA00A01151K that you referenced this would be the correct replacement.

view full answer...

Answer 5

The Maxxair website doesn't list the 4900K as coming with a remote control option. It may have been something added by a manufacturer. The Replacement Handheld Remote for Maxxair Roof Vent Intake/Exhaust Fans - Qty 1 #MA00A01150K or the…

view full answer...

Answer 6

You reported that you cannot use the remote on your MaxxFan 4700K to put the vent cover up and down. Let's troubleshoot. Put some new batteries in your remote. Ensure that the display comes on. Verify if your vent cover now works. Verify if other…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Yes, the correct replacement lid cover for your MaxxFan Plus Roof Vent w/ 12V Fan part #MA00-04500K (4951KS) is the Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents part #MA10A40009K.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...