Wheel stud is designed for Kodiak integral hub-and-rotor brake assemblies. Bolt is 2-1/2" long and has a thread size of 9/16"-18 UNF-2A.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Kodiak replacement drive in trailer hub wheel stud. This is a 9/16th diameter by 2 and a half inches long and it's for a quantity of one. Now this 9/16th stud I'd designed to replace a damaged wheel stud on your trailer hub. The ray spine portion right down here on the stud is what will be driven or pressed into your trailer hub. The stud is what will be going through the bowl hole on your trailer wheel and when it's used with a wheel lug nut will hold your entire wheel to your axle. This is a grade A bolt.
They are stamped on the head. The thread size then again, is 9/16ths in diameter. It is 18 threads per inch and they do use a standard 9/16ths by 18 lug nut. Usually that size lug nut is what is used on 16 inch and larger wheels. The overall length we're going to measure.
The overall length will be measured from the bottom of the head to the very end of the bolt. If we put a ruler on that you can see it's two and a half inches. The threaded length portion is going to be right at one and three eights inches. The diameter of the spline portion right here is 11/16ths of an inch. That should do it for the review on the Kodiak replacement drive in trailer hub wheel stud. 9/16ths in diameter.
2 and a half inches in length and a quantity of one.
Average Customer Rating: 5.0 out of 5 stars (20 Customer Reviews)
Wheel stud is designed for Kodiak integral hub-and-rotor brake assemblies. Bolt is 2-1/2" long and has a thread size of 9/16"-18 UNF-2A.Exactly what I needed delivered quickly. Couldn't ask for better service
exactly what I needed
I shopped around and no one locally had the part. You were the only one that was reasonable and had A detailed picture and dimensions to make sure it was correct. Fit perfect and I'm on the road now thanks so much.
It was the exact fit. The stud & nut were a perfect fit. Was very please with the service.
Thank you
Thank you for your Fast Quick Service.
Everything was great I will continue to shop here
Excellent
Perfect fit as always
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.