Can 1/2 Inch Wheel Studs be Changed to 9/16 Inch Wheel Studs
Question:
1/2” factory wheel studs to 9/16” wheel studs. 1992 Featherlite 8110 livestock trailer. I am putting 8 x 6.5 Alcoa aluminum wheels on but the new wheels require 9/16 studs. I would like to know if I can just swap out wheel studs or do I need to replace hub/drum to 9/16 studs. I believe the trailer was equipped with 7k dexter torsion axles from factory. Thank you for your time!
asked by: Josh
Helpful Expert Reply:
It may be possible to change your studs from 1/2" to 9/16" so long as the studs are drive-in (as opposed to threaded); also, the length and knurl diameter needs to be the same. For example, the Kodiak Wheel Bolt - 9/16" Diameter x 2-1/2" Long # K916WB25 has a 0.685" knurl diameter.
So you do need to have some very specific measurements, otherwise you will need to change your hub to get that size wheel stud. I have added a link to a video review for you to check out as well as a link to our selection of 9/16" diameter, drive-in wheel studs.
Products Referenced in This Question
Kodiak Wheel Bolt - 9/16" Diameter x 2-1/2" Long
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 9/16 Inch Diameter
- Drive-In Stud
- 2-1/2 Inch Long
- Kodiak
more information >
Product Page this Question was Asked From
Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- 25580
- 14125A
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 9/16 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Hydrastar Disc Brake Kit w/ Actuator for Tandem Axle Trailers - 13" Hub/Rotor - 8 on 6-1/2 - 7K
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: Kodiak Wheel Bolt - 9/16" Diameter x 2-1/2" Long
- Shop: Replacement RV Air Conditioner Cover for Advent Air Low Profile Units - Black
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7K
- Q&A: Can 1/2 Inch Wheel Studs be Replaced by 9/16 Inch Wheel Studs
- Search Results: 023 106 00
- Video: TryRyde Tang Type Replacement Spindle Washer Review
- Search Results: aluminum hinge
- Video: Bulldog Fixed Base Gooseneck Coupler Review
- Q&A: How Do You Know When Trailer Brake Pads/Drums Need to Be Replaced
- Q&A: Troubleshooting Alignment of Gooseneck Coupler with Inner Tube Replacement
- Q&A: Can Short Bed Trucks Tow Gooseneck Trailers
- Q&A: Is It Possible To Use 17-1/2" Wheels For 5/8" Studs On Hub With 9/16" Studs?
- Search Results: 12x2 brake drums 7000 dexter
- Search Results: wheel studs
- Search Results: leaf spring shackles
- Q&A: Wheel Stud Size and Replacements for Dexter Trailer Hub Assembly 8-214-5
- Search Results: dexter wheel studs
- Search Results: cooper tire
- Q&A: Electric Drum Brakes To Hydraulic Disc Brake Conversion Kit For 7,000-lb Axles
- Shop: Fifth Wheel Hitch
- Video: Roadmaster Comfort Ride Suspension Installation - 2017 Grand Design Reflection Travel Trailer
- Video: Roadmaster Comfort Ride Suspension Installation - 2020 Grand Design Momentum 5W Toy Hauler
- Video: Roadmaster Comfort Ride Leaf Spring Suspension Installation - 2022 East to West Alta Travel Trailer
- Video: Roadmaster Comfort Ride Shock Absorbers Installation - 2017 Grand Design Solitude Fifth Wheel
- Video: Dexstar Tires and Wheels - Wheel Only - AM20759 Review
- Shop: Brake Controller