Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that are ready to ship
Two points of steel-on-steel friction work to prevent and correct trailer sway in this weight distribution system. Sway control brackets help to ensure that your trailer stays in line with your tow vehicle. Shank and 2-5/16" hitch ball included.
Features:
Specs:
| Included w/ System | Required - Sold Separately | Optional Add-Ons |
|---|---|---|
| n/a | n/a |
Create a more stable ride for your tow vehicle and trailer with a weight distribution hitch. Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout. The result is a smooth, level ride, as well as the ability to tow the maximum capacity of your hitch.
The tongue weight rating is the most important factor in determining which size weight distribution system you should use. If the bars of the system you choose are rated too high for your setup, they will create a rigid ride, which can result in a bouncing trailer. If, on the other hand, the bars are not rated high enough, the system will be unable to properly distribute the weight, rendering it virtually useless.
To determine the proper weight rating for a weight distribution system, you must first determine your trailer's tongue weight. Then add to that the weight of the cargo behind the rear axle of your tow vehicle. These two measurements make up the tongue weight rating for a weight distribution system.
The two points of sway control within the e2 are created by the steel-on-steel friction that occurs when the spring bars slide within the L-brackets that are mounted on the trailer tongue. Most traditional weight distribution systems have spring bars that are suspended by chains. Although this ensures that the system is not so rigid as to create bounce in the trailer, it also allows a good deal of side-to-side play in the system.
The direct friction that is applied to the spring bars in the e2 system helps to stop sway once it has begun. The concept is similar to the way in which an add-on friction sway control device functions. When each spring bar moves forward or backward, or side to side, it rubs along the bracket, creating friction. The resistance created by this action limits the movement of the spring bar, thus preventing further side-to-side movement of the trailer.
Most add-on units feature some sort of friction material similar to that used in automotive brakes. But the e2 uses direct steel-on-steel contact to create resistance. This is the same sort of friction that is used with locomotives that pull loaded railcars weighing tons. No additional materials are needed. The steel will outlast any of those other materials, providing an extremely durable, functional sway-control system.
Average Customer Rating: 4.7 out of 5 stars (597 Customer Reviews)
Two points of steel-on-steel friction work to prevent and correct trailer sway in this weight distribution system. Sway control brackets help to ensure that your trailer stays in line with your tow vehicle. Shank and 2-5/16" hitch ball included.This made a huge difference in how my Toyota Highlander XLE towed a Winnebago Hike100. Before there was too much tongue weight and it caused extra sway at highway speeds. Now when hitched up my setup is more level and the sway is gone. Had to do a bit of adjustment related to the spaces but once I got it to the correct number of washers everything was perfect. Definitely recommend this.
Delivered on time,easy to read step by step instructions. Easy assembly/install with correct tools.
Last weekend we took a 150 mile trip with our older nomad camper. The e2 weight Distribution w/2 point sway control worked like a charm. Even had a cross wind at around 25-30mph and there was little to no sway. I took a bad picture of the hitch set up, but my pull was with a 2000 chev. pickup 1500 , 4 wheeler in the back end of pickup ,and trailer loaded to around 7,000 lbs. I will and have told many people about this hitch set-up already. Excellent job etrailer.
This trailer weight distribution and sway control set up has made a huge difference in towing. The first trip we took with out 28' travel trailer was a slow going trip with lots of white knuckle driving. After that i bought and installed this set up and it was like driving a whole different way with less stress that was noticed even before we got out of town. I will not be towing a camper with out this. Install was simple but would be much easier with a second set of hands.
Bought for a 4000 mile trip. Setup- 2015 2500 Ram, microlite 25 brds about 7k lbs. make sure the position of bars is exact on each side, even a 1/2 inch difference will make the trailer lunge to the side in a turn.. once i got it dialed it was awesome and i hauled ass through mountain passes and tight turns with ease. Its a must have. I wont ever tow with out one again.
Im yet to install my distribtion hitch. However, if it works as good as the customer service from Dianna. It will go great. With todays online customer service. I would highly recommend E-trailer personal customer service. She answered my calls, called me back and spent the time researching my needs.
She alone made my purchase.
This hitch has been amazing! So far I have put over 2500 miles on it pulling a 6000+ lb trailer with my F150 and I have been incredibly satisfied. The hitch is very easy to hook up and disconnect and the ride is great. This distributes the weight perfectly and the ride is great. I like this way better than the chain style WDH that I used on my last camper. I particularly like that this unit handles sway control without an additional friction device. I have had zero problems with sway, bouncing, or ride control since installing this. I highly recommend it!
Patrick
7/30/2018
Over 6600 miles on this hitch, and not a problem! We have driven from Michigan to Niagara Falls, Florida, and countless places closer to home. I have hooked/unhooked this hitch 50+ times and it is extremely quick and easy. I am still highly satisfied with this hitch and recommend it to everybody I know who is getting started.
Not my first experience with etrailer. Have purchased 4 hitches from them and every experience has been great. Just bought the Fastway e2 10,000 lb hitch to pull a new travel trailer and picked up the trailer today. I was somewhat concerned about picking it up today because the wind has been blowing at 15 to 20 mph. If you have pulled a TT in wind you know how it can cause unnerving sway. I have had white knuckle experiences with my other TT and hitch but this was not my experience today. There was only 1 time which I felt the sway from the wind on the way home and that was not significant. I believe I purchased a good hitch and I know I bought it from the right dealer.
Don
4/14/2019
Works well but is noisier than when new. Wish there was something could be done to make it quieter.
Mike L.
4/20/2019
Not sure if it was this alone, or this in combination with the roadmaster active suspension, but when I hooked it up to my new trailer that is 2000 lbs heavier, it towed like a dream. Very pleasantly surprised, and almost half of what the dealership wanted to charge me. Was skeptical of not going with a different brand, but so far no regrets at all. Easy to install as well.
Wayne
6/22/2021
Still working well. The only concern after a year is that the bolts that hold the side brackets on have loosened up a bit. I guess this is expected over time, but it almost seems as if they cannot be tightened enough to prevent a little bit of play.
Extremely satisfied with this hitch. Using the included instructions made Installation, setup & adjustment a breeze. Hook-up is easy with the included tool. The hitch was used to tow a 2018 Jayco 23RBM behind a 2018 Ram Power Wagon. It preformed flawlessly on a 600 mile trip & the sway control took all the anxiety out of towing. A very nice hitch for the price.
Ron T.
4/26/2019
Still 100 satisfied with the hitch. Preformes flawlessly.
I have made two long hauls using the new swaybar system. It has made a big difference in how safe and in control you feel. The most important part of the system for me is how it has almost eliminated the rocking motion produced at the point of the trailer tongue and ball mount.
Huey D.
6/4/2020
I love my hitch and weight distribution system. It has given me great control when towing my travel trailer.
After 1 year of use, I just don't know why you would pay more for a weight distribution hitch. Have had no troubles at all with this product. The main selling point for me was the ability to back up without disconnecting anything. I currently pull a travel trailer that weighs around 8700#s.
Mark S.
1/23/2020
Still working great. I use my travel trailer a couple times a month. Pulled around 5000 miles. Have had no trouble. would definitely recommend it.
The hitch lock was too short to actually lock (or even hook up) in my 2 inch hitch. They took it back, but if the thing doesnt work at all, then its a one-star until that gets fixed.
Part of why I chose this hitch was because I have an 8.5 x 18 trailer with a V-nose, and this one would just fit, while some others wouldn't. I towed my trailer unloaded with and without the hitch and fully loaded with the hitch. I never had sway in any of the cases, but the weight distribution was absolutely necessary for the loaded trailer, and worked very well. It also gave me more confidence when towing. Pretty easy to set up once you get used to it, and it really leveled out my towing rig (and was required for the tongue weight I had). There are a couple of little pins that retain the spring bars in the hitch head that look pretty flimsy, but I didn't have any trouble with them after towing over 3000 miles. I am thinking about getting a couple extra just in case. e-trailer sells them, and they are pretty cheap. Make sure the friction pad on the bars are angled level with the L-brackets and lubricate where the spring bars go into the head. I ordered the pre-installed hitch ball, as I don't have a torque wrench that goes high enough to properly torque the hitch ball. Overall it's a solid setup and a must have if you have a significant tongue weight.
The product was shipped promptly and came in without any damage. I use this on my 2015 Ram 1500 (Big Horn) truck to pull a Rockwood 232XRT camper. The tongue weight can get pretty large on this type camper (one axle) due to it having 2 full propane tanks, 2 batteries and then my 470 pound Kawasaki Versys on the front. This definitely reduces that weight and make the Truck perfectly level when towing. It also makes the trailer much better to tow as far as sway (the Truck stays in a perfectly straight line going down the road with now sway/jitter effect.
Overall I am very happy with this hitch.
Product worked perfectly, took some time to get it right. But things that are to easy, I've found easy is cheap. Fast delivery, great product and nice costumer service. Will order from etrailer again, need mirrors to fit GMC Sierra 2011 than summer begins
Christopher
6/27/2019
Been working really good, still trying to find decent mirror extension though
Rachael H.
6/30/2019
Helpful Links
I bought this hitch to tow an enclosed car trailer behind a Nissan Titan. My main goal was to reduce sway as my previous WD hitch had no sway control. This hitch only has 2 points of friction whereas other Fastway models have 4. The anti-sway on this hitch is basically ineffective. I would say compared to the previous WD hitch that had no anti-sway that this one is no different. Very disappointed. I later purchased a Husky Centerline TS to tow a travel trailer behind the same truck and it is amazing at reducing anti-sway and I paid less for it. AVOID this model.
This hitch worked perfectly for hauling the camper with our F150. Easy to use. I love that I can back up without removing the arms.
Rick C.
12/18/2020
Still happy a year later. We camped more this summer than ever before Covid caused something good and it still works well. Very happy with it, a great product!
My wife and I just purchased a new trailer, Lance 1885, and ordered the Fastway e2 hitch for our F150 from etrailer.com. The hitch was shipped the day we ordered it, Saturday, and arrived the day before we were to pick up the trailer. Once we had the trailer we read the hitch instruction manual, watched the videos, and in less than two hours total, including watching the videos, the hitch was installed and adjusted. The next week we took our first trip with the trailer from our home in Vista, CA to Jumbo Rocks Campground in Joshua Tree National Park. The Trip from Vista to Joshua Tree was about 300 miles round trip. The trailer pulled very easily and was rock solid the entire trip. The hitch worked better than advertised.
The trailer brackets occasionally slide back despite having the bolts torqued as specified. This resulted in having a spring bar bending and then dropping from the "L" bracket during a tight left turn leaving a fueling pump.
We love our Fastway e2 Weight Distribution Hitch.
This is actually my second Fastway e2 WD hitch. I purchased one for my boat a few years ago and was impressed. I purchased this one for my new travel trailer (it's a bit heavier) and I'm definitely not disappointed. Since it has a wide range of adjustment, I can use it now with my smaller trailer and in the future when I upgrade to something bigger. Definitely recommend.
Looks good and installation looks easy enough. I have a shoulder injury so I won't be installing it for a month or so. I will let you know after I get it installed how it works.
Marty M.
7/18/2018
Great, took a little time to get the right combination. I’m pulling a 20 foot PJ car hauler 10,000 lb hauling antique tractors around 5,000 lbs. When I pull the trailer empty I take the torsion bars off it improves the ride.
2015 Chevy Equinox, 3.6 LTZ, AWD. Install was simple just followed the steps. Leveling the vehicle out was a process and I couldn’t find the middle for the front suspension. It was either extremely under / over adjusted or right where the suspension started without a load on it. I decided to leave the adjustment with the front fender at its initial position while using the weight distribution. The vehicle and trailer were both level, I’m pulling a 17BH Coachman Clipper dry 2900lbs. I drove an hour to the camp ground with no sway or excessive suspension play. Same drive back in the rain/sleet no issues at all up to 75MPH.
We had one of the "L" brackets bend slightly and the manufacturer did send us a new set of "L" brackets within a week of contacting them. Great service. I would purchase this again and would recommend to anyone looking for a dual purpose load distributing/ anti-sway set up. The only reason why I did not give 5 stars was because the "L" bracket bent when it should not have.
Do you have a question about this Weight Distribution Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
R.b.
8/27/2023
Perfect