Replacement L-Pin for Fastway e2 Weight Distribution Systems
(343 reviews)
Price: $14.70
In Stock
Replacement L-Pin for Fastway e2 Weight Distribution Systems
Item # FA92-03-9205
Our Price: $14.70
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (343)
- Q & A (0)
- Videos (1)
- Photos
Fastway Accessories and Parts - FA92-03-9205
- Weight Distribution Hitch
- Pins and Clips
- Fastway
- e2
Replaces the L-pin on one of the sway control brackets on your 6,000-lb, 8,000-lb, 10,000-lb, or 12,000-lb Fastway e2 weight distribution system.
Features:
- Replaces the L-pin on one of the sway control brackets on your 6,000-lb, 8,000-lb, 10,000-lb, or 12,000-lb Fastway e2 weight distribution system
- FA92-00-0600, FA94-00-0600, FA92-00-0800, FA94-00-0800, FA92-00-1000, FA94-00-1000, or FA92-00-1200
- For the 4,500-lb e2 weight distribution system, FA92-03-9460 (sold separately) is the correct L-pin
- Quantity: 1 L-pin
92-03-9205 Replacement L-Pin for Fastway E2 Trunnion or Round Bar Systems
Video of Replacement L-Pin for Fastway e2 Weight Distribution Systems
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Fastway Replacement e2 Weight Distribution System L-Pin - FA92-03-9205
Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this Fastway replacement L-pin. This is going to replace one L-pin for your Fastway e2 weight distribution system. This is going to install on your L-bracket and it will help to hold your spring bar in place so you don't have to worry about it coming off as you're traveling. This is a direct replacement from Fastway so you can trust is going to work with your Fastway e2 weight distribution system, whether it's a 6,000 pound, 8,000 pound, 10,000 pound or 12,000 pound system with either a round bar or a trunnion bar. Now, if you do have a 4,500 pound weight capacity trunnion weight distribution system, the Fastway e2 weight distribution system, you'll need to use the part number that you see on the screen there.
It is a little bit smaller so it's gonna fit that smaller trunnion bar for you to make sure that it's going to stay in place. But if you do have the 6,000 pound, 8,000 pound, 10,000 pound, or 12,000 pound Fastway e2, this is gonna be the correct pin, direct replacement from Fastway, so you can trust it is just gonna fit right in place. You can still use all your other components. There's no compatibility issues or anything like that. So that completes our look for today.
Again, I'm Michael with etrailer.com. Thanks for watching..
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Replacement L-Pin for Fastway e2 Weight Distribution Systems - FA92-03-9205
Average Customer Rating: 4.8 out of 5 stars (343 Customer Reviews)
Replaces the L-pin on one of the sway control brackets on your 6,000-lb, 8,000-lb, 10,000-lb, or 12,000-lb Fastway e2 weight distribution system.by: William03/02/2024
Excellent product. Ideal extension for my older power cord so that I can power my travel trailer from my Ford Powerboost truck. Very durable. I would definitely buy it again.
by: Carl07/08/2020
etrailers original order was handled so badly by the carrier that all we got was an empty delivery envelope that was put into a clear plastic bag with sorry for the inconvenience printed on it. It was the holiday weekend when this happened but I sent the email to etrailer anyway and got a response the next day. I explained what happened and they sent out a new order that day. I can’t say enough great things about this company. I’ve used them before and everything I’ve ever gotten from them has worked great. Also, I really like these pins over my stock ones I received with the e2 hitch I bought a few years ago from my camper dealership. I like larger section for the L-pin to sit.
by: Michael06/26/2023
JessicaM and etrailer are super stars! Lost a L Pin for my weight distribution trainer, I was leaving town ina few days and ordered on Saturday and received as promised on Tuesday Bravo
by: Gail 09/17/2023
I have purchased various parts from etrailer. They have been exactly as described with fast delivery.
by: Terry P03/05/2024
I think it’s sad y’all sell one piece and it don’t come with the pin to keep it from coming out
by: Carolyn 02/15/2024
Order arrived very quickly. Thank you for your prompt service.
by: Jim 02/09/2024
A bit pricey.
by: David 02/06/2024
Perfect tournament
by: Lynn 08/03/2023
Exactly as described and will work perfectly on my trailer... received it quickly and in good shape!
by: Jerry02/10/2023
I was six hours away from home when I needed to purchase a trailer.
They recommended the right trailer for the weight I would be carrying back home, without trying to over sale me. They even reached out to make sure I was satisfied after I got home!
by: Chris03/10/2023
I assumed there were 2 pins since the price was $XX. Wow! I am still in disbelief! Then for it to not come with a retaining clip. I'm not a happy camper !! Just want to let you know!
by: Nancy08/14/2023
Don’t expect to receive product. Package used is envelope that will allow product to be lost on the way. Change packaging!!!!
by: David 03/31/2023
Excellent service and original replacement parts !
by: Jason 07/25/2023
The right part...the right price...great experience
by: Robert 08/30/2023
Easy to order. Received in a timely manner. Exactly what I needed.
by: Denis07/29/2019
I purchased several parts for our stabilizer for our RV. I ordered the parts on a Sunday and ON THAT Day my order was filled! There was a minor issue with my order but when I brought it to the company's attention, they immediately made it right! I strongly recommend this company! Their merchandise is good quality and their attentiveness is EXCELLENT!
by: Janelle07/04/2023
This came about half the size of what I was trying to replace.
by: Joe L07/25/2017
Just purchased a new trailer, and had the round bar equalizer/sway control installed. The system is an improvement over the old chain-tension and friction bars I've had before. Send to pull great, though no serious Wyoming crosswind test yet! Since the L pins are fairly small, I just wanted a spare set in the likely event one gets lost or dropped in mud or tall grass some might.
On further thought after a couple trips, I am going to drill an 1/8 inch hole on the top inboard ends of the pins, and attach a small light 'keeper' chain or cable to the pin and the trailer tongue, that way maybe I will never need to use my spare pins!
Your service was prompt and excellent thank.
Joe
by: William07/23/2018
The product is just as ordered and needed. The service at etrailer is always superb, quick, efficient, friendly, helpful! This is the second time I've had to order extra 'L' clips, dues to being lost/misplaced, but ordering from etrailer and George is so pleasant and service so fast, maybe I have been unconsciously losing them so I can order more?
But to save money, here is my solution to losing more of them: I drilled a 3/32" hole in each new pin, on the opposite end of the pin from the hole for the spring clip, and about 1/4" from the end, NOT near the bend), got two 24" lengths of 1/16" galvanized cable from the hardware store along with two 1/16" cable ferrules, ran one cable through each new hole in each pin, fed the cable through one of the unused holes in the anti-sway mounting bracket, and clamped the cable ends together with the ferrules. Now the pins are permanently attached to the trailer anti-sway bracket! So now I'll have to order other things from etrailer.
by: Dave 02/15/2023
Fast Reliable and the staff is the best Thanks again for getting me the right part the first time
by: Will C04/01/2020
I wanted a spare in case something were to happen while on the road. I found a similar part while on a trip but wasn't satisfied with it's fit and quality. I decided to buy from etrailer as from past experience I learned your products are great quality at a fair price. I had a few questions and your staff was there for me. I appreciate your experience and support !
Will C.
4/2/2021
Perfect, no problems !
by: Buster H.05/15/2017
Ordered these parts from e-trailers and got them within a couple of days. Exactly what I wanted. Perfect match
Buster H.
5/15/2018
Great,
by: Daren11/01/2017
I was really pleased to find etrailer.com. It has all the parts I needed, both for this order and any future E2 swaybar replacement parts. I actually scrambled last week for a bracket piece that I eventually found at a local dealer, but was glad to see etrailer has it online so I can order a backup. My only very tiny regret is I didn't realize the L-pin didn't have cotter pins with it. I still have the originals, but it seems like maybe making that a standard part of the package would be beneficial. Good pricing too.
by: Brinky06/15/2023
The package arrived empty and was returned with full credit.
by: Kathy08/26/2019
Product was exactly what we needed to replace old brackets on our 4-Way Sway system. Items were delivered as promised, thank you!
Kathy S.
8/28/2020
Product worked out great to replace L pins on 4-way sway
25
343
Show More Reviews
See what our Experts say about this Fastway Accessories and Parts
- Dimensions of Replacement L-Pin for Fastway e2 Weight Distribution SystemsI was able to go out to the warehouse and measure the Replacement L-Pin for Fastway e2 Weight Distribution Systems # FA92-03-9205 for you. I found that the square stock is 5/8 inch by 5/8 inch. The measurement from the pin hole to the bend is 1.64 inches and the distance from the bend to no pin hole end is 1.46". I have linked a few images with the measurements to this page for you to better see. I have also linked the product to this page for your purchasing convenience.
view full answer...
- L-Pin Replacement for Fastway e2 Weight Distribution with 1,000 lb Spring BarsThanks for getting me the capacity of your Fastway e2 weight distribution. Since we know it's a 1,000 lb tongue weight system the correct L-pin replacement is the part # FA92-03-9205.
view full answer...
- Replacement L-Pin for 1,000 lb Tongue Weight Fastway e2 Weight Distribution SystemThanks for reaching out! It sounds like you have the 1,000 TW/10,000 tow system so you need the L-Pin # FA92-03-9205 for your application. Attached are review videos of each for you to check out.
view full answer... - What L-pin Will Fit My Fastway e2 Weight Distribution Hitch FA92-00-1000I have an option for you but the Replacement L-Pin for Fastway e2 Weight Distribution Systems # FA92-03-9460 will not be the correct L-pin replacement for your Fastway e2 Weight Distribution Hitch FA92-00-1000. The correct replacement will be the Replacement L-Pin for Fastway e2 Weight Distribution Systems # FA92-03-9205. This replaces the L-pin on one of the sway control brackets on your 6,000-lb, 8,000-lb, 10,000-lb, or 12,000-lb Fastway e2 weight distribution system.
view full answer... - Part Number for L-Pin of Replacement Hardware Kit for Fastway Sway Control BracketsYes, the L-pin of the Replacement Hardware Kit for Fastway Sway Control Brackets # FA92-02-9200 that you referenced is the part # FA92-03-9205 that you mentioned.
view full answer... - Replacement L-Pin for Fastway E2 Weight Distribution SystemThe e2 part number you have of # FA92-00-1200 is actually a Fastway system and not a Reese which may be why you were having a hard time finding parts. So for a replacement L-pin you'd want the part # FA92-03-9205 and you'd be set.
view full answer... - How Many L-Pins Come in Replacement L-Pin for Fastway e2 Weight Distribution Systems #FA92-03-9205For the Replacement L-Pin for Fastway e2 Weight Distribution Systems # FA92-03-9205, 1 L-Pin comes in the package. The Replacement L-Pin Clip for Fastway e2 Weight Distribution Systems # FA92-04-9208 are the correct clips for the # FA92-03-9205. One clip comes in a package for this as well.
view full answer... - Replacement L-Pin for Fastway e2 Weight Distribution SystemIt sounds like you're looking for the Replacement L-Pin for Fastway e2 Weight Distribution Systems # FA92-03-9205 which is for the larger e2 weight distribution systems. If you also need the clip you can find that as part # FA92-04-9208.
view full answer... - Which L-Ping Clip For Fastway Replacement L-Pin FA92-03-9205?I would be happy to help! The correct L-Pin clip for the Replacement L-Pin for Fastway e2 Weight Distribution Systems # FA92-03-9205 you were looking at is the Replacement L-Pin Clip for Fastway e2 Weight Distribution Systems # FA92-04-9208. I included a video of the # FA92-03-9205 for you to take a look at.
view full answer... - What Does the Replacement L-Pin for the Fastway e2 Weight Distribution Systems DoThe only job of the Replacement L-Pin for Fastway e2 Weight Distribution Systems part # FA92-03-9205 is to keep the spring bar from becoming detached from the frame bracket. The spring bar is going to naturally pin itself down onto the frame bracket, the pin is just there to make sure it does not slip or bounce off. It doesn't need to be in direct contact with the spring at all times. If you need the cotter pin as well we offer this as the Replacement L-Pin Clip for Fastway e2 Weight Distribution...
view full answer... - Correct Replacement L-Pin For Fastway e2 Weight Distribution HitchI have a different option for you, but the Replacement Spring Bar Retainer # BLU25QR you were looking at is not confirmed to fit your Fastway e2 Weight Distribution Hitch. Instead you will need either the # FA92-03-9460 if you have the 4500lb system, or the # FA92-03-9205 if you have the 6000lb, 8000lb, 10000lb, or 12000lb system. I included videos of the products mentioned for you to take a look at.
view full answer... - Replacement L-Pin for Fastway e2 Weight Distribution System with 10,000 lb Trailer CapacityThe # 90-03-9460 was not designed to fit a 1 inch by 1 inch square hole, but if you can let me know what brand of system you have and exactly what pin you are looking to replace I can see if we can help you find the pin that would work for you.
view full answer... - Replacement L-Pin for Fastway e2 Weight Distribution HitchWe do have the exact replacement L-pin you need for your 10,000 lb towing/1,000 lb tongue weight Fastway e2 Weight Distribution # FA94-00-1000. I can confirm that the correct part is the following: - Replacement L-Pin for Fastway e2 Weight Distribution Systems # FA92-03-9205
view full answer... - Correct L-Pin and L-Pin Clip for Fastway E2 Weight Distribution SystemFor your Fastway e2 weight distribution system the part # FA92-03-9205 is the correct L-pin and the # FA92-04-9208 is the correct L-pin clip.
view full answer... - Replacement L-Bracket, L-Pin, & Clip For Fastway e2 6,000 lb to 12,000 lb Weight DistributionWe do have the exact L-pin and clip to go with the L-bracket for a 6,000 lb to 12,000 lb Fastway e2 weight distribution hitch. I'll go ahead and list out all of the parts for you below: - Replacement Sway-Control L-Bracket # FA93-02-5150 - Replacement L-Pin # FA92-03-9205 - Replacement L-Pin Clip # FA92-04-9208
view full answer... - Replacement L-Pins for Fastway FA94-00-0800 Round Bar Weight Distribution System The # FA92-02-9200 Replacement Hardware Kit for Fastway Sway Control Brackets includes two of the # FA92-03-9205 L-Pins. The replacement hardware kit is designed for the Fastway e2 weight distribution hitch, so it will indeed work with the system you have. I'll link you to some weight distribution FAQ articles that I hope you'll find informative.
view full answer... - Will The Equal-i-zer L-Pins and Clips # EQ95-01-9430 Fit a Fastway E2 Weight Distribution Hitch? Yes, the Replacement L-Pins and Clips for Equal-i-zer Weight Distribution Systems # EQ95-01-9430 can also be used to replace the L-Pin # FA92-03-9205 used on the Fastway E2 6,000-12,000lb weight distribution systems. The L-Pin simply holds the bar inside the sway bracket and prevents it from sliding out. It is compatible with both the round bar style you have and square bars.
view full answer... - Replacement L-Brackets for Fastway Weight Distribution SystemYes we do have replacement L-brackets for Fastway weight distribution systems like the part # FA93-02-5150 for the l-bracket, part # FA92-03-9205 for the L-pin, and part # FA93-02-5350 for the outer link plate.
view full answer... - Replacement Round Bar, L-Pin and Pin and Clip for Fastway e2 Weight Distribution SystemWe have all the replacement parts you need for your Fastway e2 Weight Distribution System # FA94-00-0800, which has an 800 lb tongue weight capacity. Replacement Round Bar: # FA94-02-0899 Replacement L-Pin: # FA92-03-9205 Replacement L-Pin Clip: # FA92-04-9208
view full answer... - Replacement L-Pins for Fastway e2 Weight Distribution SystemsThe L-pins on the Fastway e2 systems are a little different than those used with the Equal-I-zer system but # EQ95-01-9430 can be used. For the e2 system we also have replacement L-Pin # FA92-03-9205. The clip is # FA92-04-9208. Each of these are sold in quantities of one. The Equal-I-zer bracket jackets you referred to, part # EQ95-01-5150 will work with your Fastway weight distribution system. However, if you use the bracket jackets, you'll significantly reduce the effectiveness of the...
view full answer... - Does Replacement Fastway e2 L-Pin # FA92-03-9205 Fit 12k Rated Fastway e2 KitThe replacement L-pin part # FA92-03-9205 that you referenced fits Fastway e2 kits that are 6,000-lb, 8,000-lb, 10,000-lb, or 12,000-lb.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Updated by:
Dan D
Updated by:
Lindsey S
Updated by:
Adele M
Updated by:
Shelly K
Updated by:
Wilson B
Expert Research:
Jackie C
Expert Research:
Jameson C
Installed by:
Cole B
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Denis R.
7/30/2020
It has been over a year and Im happy to say my L pins for my stabilizer continue to work well! This company is my go to for any parts I need!