Fulton Bolt-Thru Swivel Marine Jack w/ Caster - Sidewind - Black - 10" Lift - 1,200 lbs

Video Transcript for Review of Fulton Trailer Jack - 10 Lift 1,200lb Frame Mount Jack - F77CR

Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this Fulton bolt through swivel marine jack. This marine jack is going to lift your boat or recreational trailer up to 10 inches. It will then support that trailer weight and lower it when you're ready to. This will have a lift capacity of 1,200 pounds, so it should be great whether you're wanting to take out your boat for the weekend or any other marine use. This does have the side wind design so it's gonna be very easy to access that handle to raise and lower our jack, be very easy to grab onto this handle, a very convenient location there.

This does also have a convenient spring loaded half inch diameter plug pen that's going to allow you to easily swing the jack into place so you can raise it up to keep it out of the way as you're traveling, and then rotate it back down so that it's ready to be used in the down position there. Our bolt through mount is going to attach to your 3 inch by 3 inch, 3 inch by 4 inch, or 3 inch by 5 inch trailer frames. This is going to provide a minimum deflection and a maximum support. This has 3-D formed heavy-gauge steel stamping, so it's gonna do a good job for you. It also utilizes proprietary pushing material, so that you have a nice solid connection with your trailer and it will do a good job of allowing you to swivel and use it when you need it.

From the top of our bracket here to the top of our jack, we are going to have a clearance of 10 and a half inches, so keep that in mind if your jack is gonna be close to your tailgate on your truck. If you're using a truck to tow, make sure that that's not going to cause any problems or be careful as you're lowering your tailgate down while you have your jack there. This is going to have a 14 and a half inch height from the top of our bracket to the ground when it's fully retracted. When we have it fully extended, that height is going to increase by 10 inches to 24 and a half inches. You can see we do have a 6 inch diameter thermo plastic wheel, so it's gonna be very easy to move this around in our driveway, when we're putting our boat away, that sort of thing.

This is gonna be a really nice hard plastic that will do a good job of conquering just about any terrain. The rest of our components are a heavy duty steel construction. You can see our 2 inch diameter outer tube does have a black powder coat to help resist rust and corrosion, so that will last for a long time for us. Our inner tube here has a diameter of 1 and 3/4 of an inch, so again this will be a really nice option for you when you're wanting to replace or add a jack onto your boat trailer. You can see they do include the hardware that you're gonna need to get this mounted in place.

You'll put these brackets on the other side of your trailer frame and those bolts and lock nuts there will allow you to bolt it down so it will be very easy to get attached, you won't have to worry about welding or anything like that. It will do a good job for you, making sure that you're able to raise and lower your trailer. So that's gonna complete our look for today, again I'm Michael with etrailer.com. Thanks for watching..