Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that are ready to ship
17" Long x 1-3/8" tall x 1" deep. Waterproof identification light bar is designed for trailers wider than 80". Durable polycarbonate lens and housing. Surface mount to trailer. 2-Wire pigtail.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (124 Customer Reviews)
17" Long x 1-3/8" tall x 1" deep. Waterproof identification light bar is designed for trailers wider than 80". Durable polycarbonate lens and housing. Surface mount to trailer. 2-Wire pigtail.
I was not able to source this light from my trailer dealer. After a very very brief search on etrailer I found what I was looking for. The pricing was incredible. The shipping was quick and efficient. I have been a returning customer for all my trailer needs
eTrailer customer service is first class. When I need things for my truck and trailer, I always look to eTrailer first.
This is very easy to use. Descent quality. Does not come with mounting screws.
Good product reasonably priced!!
installed 2 of these on my trailer. work great and look good
Product quality appears excellent. I chose this one because it was LED, sealed, and because the spacing between the bolt holes matched the holes in my trailer from the old light housing. I had to enlarge the center hole a bit to allow the ground connector to pass through but that was easy enough with a stepped bit. I was able to remove the old light, clean up the metal frame and bolt this one right in place. I was about to drill another hole for the ground wire's ring terminal when I realized that it was long enough to connect to one of the bolts. That is probably obvious to many but I almost missed it.
One minor complaint was that the holes for the mounting bolts were really small. I was able to find a pair of tiny bolts in my junk drawer that fit but they are REALLY small. I think this would be better if the holes were a bit larger.
solid build
Thanks for the great service as always! Before and after photos....
Easy and fast service.
This light is an exact replacement of the original product on my trailer. The trailer manufacturer drilled and broke the water tight seal when the original was installed.
Ordered new red & yellow led signal markers and a new lid for the trailer. All arrived in 3-4 days and all the old Lights’s swapped out easy. Trailer looks new!
Product is exactly as described, arrived in great condition.
This idenrifaction led light bar works perfectly and matched the original hole pattern of the light I waas replacing.
I was concerned that it my not be bright enough since it only had one led per light but that was not the case. It is plenty bright and easily visible even in daylight.
Side marker lights were perfect, however stop/tail lights did not fit the curve trailer frame insert.
I needed to replace the damaged light bar on my boat trailer. I was able to easily find and order this part from the etrailer website. It arrived on schedule and was exactly what I needed. I would highly recommend this company.
Light is just what I had anticipated. However, what I did not anticipate was the small hole size. And because the mounting hardware does not come with, I had to dig through my stash to fine two that worked. Seems like mounting hardware should be included, especially if hole size is so small with limited solutions.
Works perfectly!!!! Looks really good too, even though it is just a trailer. Great product & company to do business with
Kerry B.
8/21/2018
Badass!!!!
The 3 LEDs is kind of lame considering the light housing appears to be made for 11 LEDs. It does work, and has worked for over a year. It is acceptable considering how inexpensive it is.
This is a perfect product, fit like the OEM on my Heritage Chaparral Trailer. Good quality and very fast shipping. Thanks again.
I have placed 2 orders with etrailer. Both orders were for trailer lights. The videos explaining the operation of the lights were very helpful. Prices were very competitive and the shipping costs were reasonable. Both orders shipped the same day. I feel the folks at etrailer went out of there way to give me a pleasant experience.
I guess it’s ok for a center clearance light. It’ll do the job, i suppose. Guess I didn’t see the part in the title where it said that it was only a 3 diode. I figured there’d be an LED behind each circle on the front of the light but there’s not. For over 20 bucks, you’d think there would be.
Great service as always. Will continue to use etrailer for all of my trailer needs. Light was as described and quality appeared good.
Purchased one of these lights from Amazon and was junk. Found etrailer site and this light is the same as the OEM. Now hope some knucklehead won't hit my trailer in the parking lot again!!
Priced right .simple wiring...box was damaged seem light was too big for the box was hanging out.minor scratches wasn't worth sending back and waiting for a new one
I received the products in quality packing so there was no damage. I also felt the prices were good for LED lights.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Steve
9/4/2023
Great!