Wide-Track Wheel Assembly for Fulton F2 Adjustable A-Frame Jack - 8" Diameter - 1,600 lbs

See what our Experts say about this Fulton Accessories and Parts

• Measurement of Wide-Track Wheel Assembly for Fulton F2 Adjustable A-Frame Jack
  The Wide-Track Wheel Assembly for Fulton F2 Adjustable A-Frame Jack - 8" Diameter - 1,600 lbs # F500266 is a component that is designed specifically for use with the Fulton F2 Adjustable A-Frame Jack, # F1413250334 which has a tubing width of 2-3/4".
  view full answer...
• Availability Of Fulton F2 Wide Wheel Trailer Jack Wheel Bracket Bearings
  We only carry the Wide-Track Wheel Assembly # F500266 for the Fulton F2 trailer jack. We do not carry just the bearing parts for this wheel assembly separately.
  view full answer...
• Recommendation for Replacement Jack Foot for a 5,000 Pound A-Frame Trailer Jack
  Sounds like your trailer's weight is too heavy to support the use of a jack caster wheel. I would instead recommend the Pro Series Footplate # PS1400700340. This has a capacity of 5,000lbs and will fit the 2 inch jack tube diameter. The Wide-Track Wheel Assembly for Fulton F2 # F500266 that you referenced would be a good choice if the jack you had a Fulton F2 A-frame jack # F1413250334. Since you do not have an A-frame F2 jack I would not recommend it for you, because it is specially...
  view full answer...
• Replacement Caster Wheel Recommendation for Fulton F2 Jack
  For a single caster wheel for a Fulton F2 jack # F1413250334 the correct part number is # F500266.
  view full answer...
• Can an Electric A-Frame Trailer Jack be Used for a Salt Water Boat Trailer
  The Electric A-Frame Tongue Jack, # LC285318, is not ideal for marine applications. The jack steel leg has a black powder coat and the foot is not painted. Otherwise, it should perform well. None of the powdered jacks we carry are designed specifically for marine applications. The possibility of getting the motor and/or electrical connections and shorting out the jack turns most towards a traditional jack for marine applications. The Fulton F2, # F1413250334, would be a good choice. You...
  view full answer...
  
• Replacement Caster Wheel Assembly for Fulton F2 Trailer Jack
  For a replacement caster wheel assembly for your Fulton F2 jack you can use part # F500266. This caster assembly uses a single wide 8-inch wheel and offers a 1600-lb capacity.
  view full answer...
  
• Bulldog Powered Drive A-Frame Trailer Jack Wheel Add-On
  For your Bulldog Powered Drive A-Frame Trailer Jack # BD500187 I recommend the Bulldog Removable, 6" Poly Caster Assembly for 2" Jack Tube # BD500245 but this will drop your overall weight capacity to 1,200lbs. For a weight capacity of 1,600lbs I recommend Wide-Track Wheel Assembly for Fulton F2 Adjustable A-Frame Jack - 8" Diameter product # F500266. You'll be able to easily slide off the drop leg and hook the wheel on with each of these products. I've attached videos going over the...
  view full answer...
• A-Frame Trailer Jack With Wheel Attachment
  You can get the Fulton F2 Adjustable A-Frame Trailer Jack # F1413250334 but take some measurements to see if it will fit in your A-Frame coupler. I've included a diagram for you! The plate that mounts to your A-Frame coupler is 5 inches in diameter and the coupler opening needs to be more than 2-3/4 inches in diameter. Yes, the wheel attachment # F500266 is an accessory. This jack can support 2,000 lbs without the wheel and 1,600 lbs with the wheel. Since the wheel is held in by a pin...
  view full answer...
  
• Recommended Wide Wheel Fulton Jack for Boat Trailer
  While we don't have a double wheel option, the Wide-Track Wheel Assembly for Fulton F2 Adjustable A-Frame Jack - 8" Diameter - 1,600 lbs # F500266 will be an improvement on your single wheel jack. It sounds like you have the side wind jack which does not have the pin and clip option. The wide wheel will not be compatible with the inner tube of that jack, and unfortunately there is not a replacement option for the jack that you have. My recommendation is to replace the jack with the...
  view full answer...
• Replacing Jack Wheel Caster with Dual Wheel Caster to Make Trailer Easier to Move
  The caster # JWK-6DP is designed specifically for etrailer or Ram jacks so it might not work with yours. But using a longer bolt with it may work. We also carry # F500266 which fits into Fulton F2 A-frame jacks.
  view full answer...
• Will The Fulton Wide-Track Wheel Assembly # F500266 Fit Wells Cargo 2 Inch Jack Tube
  I do have a solution for a replacement wheel for your standard 2 inch jack tube, but the Fulton Twin-Track Wheel Assembly, part # F500266, will not work. This wheel assembly is designed to specifically fit the Fulton F2 jacks only. For a replacement wheel, you will need to use the Pro Series Detachable Caster, part # PS1400750340, which will fit your 2 inch jack tube and has 1,200 lb capacity.
  view full answer...
• Is 8" Wheel Available for 2-1/4" Outer Tube Diameter Trailer Jack
  The only 8" caster wheel we have is for a Fulton F2 jack with the Wide-Track Wheel Assembly # F500266. This does have a cross-pattern style attachment though so if you have something other than a Fulton F2 it won't work and you'll need to stick with a 6" wheel like what you referenced with part # JC-101.
  view full answer...
• Replacement Caster Wheel Assembly for Swivel Jack
  We do offer both swivel jacks and replacement parts like wheel assemblies. Sometimes a non-original replacement wheel assembly can be used, even one from another brand. The linked page displays the replacement wheels and replacement caster/wheel assemblies we offer. Do note that just because a new caster may have 2 wheels rather than one, this does NOT necessarily mean the 2-wheeler can carry more weight. This might be the case but it is not always going to hold true. Generally a wheel...
  view full answer...
• Selecting a Replacement Trailer Jack for a Fulton 2228
  Thank you for providing the part number 2228 from your Fulton jack. I checked with Fulton but could not find this reference number. If the jack is 10-years old or older it may no longer be in their product line since many higher-capacity jacks were moved over to their Bulldog product line. In any case we can help you select a new jack for your trailer. You can use the link provided to see our main page for jacks of all types. There are filters on the page that will allow you to narrow...
  view full answer...
• Solution to Easily Maneuver Trailer Around without Tow Vehicle with 930 lb of Tongue Weight
  I do have one solution that will work great. The Trailer Valet XL part # TVXL25 (for a 2-5/16 inch hitch ball) or part # TVXL2 (for a 2 inch hitch ball), would be exactly what you'd want. These easily allow you to maneuver a trailer around without a tow vehicle. These attach to the hitch ball and give you a handle to steer and a handle to crank the wheel around. Otherwise for a trailer as heavy as yours you aren't going to be able to maneuver the trailer around easily on a wheel caster.
  view full answer...
• Fulton F2 Swing Up Trailer Jack With Wheel Having Excessive Play In The Wheel
  That definately seems like an excessive amount of play in your Fulton F2 Swing-Up Trailer Jack # F1413140334. As these jacks have a lifetime warranty you can reach out to Fulton to see if they would either send you a new Wheel Assembly # F500266 or an entire jack.
  view full answer...
• Replacement Wheel Assembly for a Fulton F2 Trailer Jack
  Thanks for the picture, it looks like you have the Fulton F2 Swing-Up, Wide-Track Trailer Jack # F1413040134 in which you'd need the Wide-Track Wheel Assembly for Fulton F2 Adjustable A-Frame Jack # F500266 for a replacement.
  view full answer...
  
• Footplate Install in the Fulton F2 Adjustable A-Frame Trailer Jack
  I spoke with my Fulton representative, who tells me that the Fulton # F1413250334 is set up to accept a wheel or a footplate, which will be held in by a snapper pin. If the jack doesn't have the collar with the pin hole, you must have a different jack that has the foot or caster permanently fixed in place.
  view full answer...
  
• Replacement A-Frame Jack for Salt Water Boat Trailer
  It is always a good idea to use a higher-capacity jack than what you may actually need since this means the jack mechanism will not be operated near its maximum capacity which is good for its reliability and a longer working lifespan. A-frame jacks typically have a 3-hole mounting pattern. I do not know of any with a 2-hole mount. This mounting arrangement would not provide enough stability and could result in jack damage. If you click on the link provided you will be able to see all...
  view full answer...
• Is Fulton F2 Trailer Jack # F1413250334 Appropiate for A-Frame Car Hauler
  I can't answer that for certain without the weight of your trailer or dimensions of your current jack but it sounds appropriate. You need a jack rated high enough to hold the trailer when it's loaded and the 2,000 pound rated Fulton F2, part # F1413250334, with the wheel, part # F500266, is probably enough. You only need the jack to hold the trailer's tongue weight which is likely fairly high when loaded by not too high for this setup. Since the wheel is rated lower than the jack your...
  view full answer...
• What Is the Difference Between Bolt Patterns on Fulton F2 F1413020134 and F1413050334
  Yes. The bolt patterns that were referred to in the videos are actually the same and in reality the .06" is a negligible difference that falls within a reasonable margin of error; I believe that on the # F1413050334 measurements were performed with a calipers where the measurement on the # F1413020134 were performed with a tape measure/ruler. These two jacks are extremely similar but the # F1413050334 has a locking mechanism on the handle to eliminate the handle free-swinging when you...
  view full answer...
• Replacement Fulton F2 Pull-Pin Swing-Up Caster Wheel Trailer Jack
  Thank you for the photos of your friend's Fulton F2 trailer jack that has a broken caster wheel assembly. I wish I had better news for you but my contact at Fulton advised that this jack cannot be serviced. The entire unit will need to be replaced. We do carry the Fulton 1600-lb-rated F2 Swing-Up Trailer Jack # F1413040134 which will bolt on to the existing installation point.
  view full answer...
  
• Available Trailer Jack Caster Wheels
  You can see all of our available jack caster wheel assemblies on the linked page. These fit on a 2-inch-diameter jack tube, such as # BD500245. If you can find a brand name or part number on your jack that will help to narrow down the correct parts, but as long as the tubing diameter matches up you should be fine using a different brand of wheel. We have plastic wheels in various dimensions, such as the 6-inch # JC-101 and also a steel wheel # JC-102.
  view full answer...
• Recommended Caster Wheel for Old Fulton Jack with 1-5/8 Inch Inner Tube Diameter?
  The Replacement Caster Wheel for Ultra-Fab Manual 2" Trailer Jack - Qty 1 # UF49-954035 will fit an inner tube diameter of 1-3/4 inches. This will be the best fit for your inner tube with 1-5/8 inch diameter. The Removable Wheel for Dutton-Lainson A-Frame Trailer Jack Model 6418 # DL22414 is another option that measures 1-13/16 inches on the inside.
  view full answer...
  

Do you have a question about this Accessories and Part?