Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Add a wheel to your Dutton-Lainson A-frame jack for easy trailer maneuvering. Fits Dutton-Lainson jack models 6670, 6670B, 6671, 6671B, and 3670B. Polypropylene construction resists flat spots and cold weather cracking. Quick-attach pin is included.
Features:
Specs:
Fits:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today were going to install part number DL22539 from Dutton Lainson. This is our removable wheel for A-frame jacks. This wheel is designed for jacks with a 2-inch inner tube. In this case well be using this with the jack also from Dutton Lainson thats part number DL22781. Its very easy to install. Well slide the wheel up into the jack and install the pin.
With those few simple steps, our wheels installed. Thatll finish it for part number DL22539 from Dutton Lainson.
Average Customer Rating: 4.9 out of 5 stars (42 Customer Reviews)
Add a wheel to your Dutton-Lainson A-frame jack for easy trailer maneuvering. Fits Dutton-Lainson jack models 6670, 6670B, 6671, 6671B, and 3670B. Polypropylene construction resists flat spots and cold weather cracking. Quick-attach pin is included.Just from installing it, and not using it other than swinging my trailer around a bit on the pad as a test, this seems to be a heavy duty, high quality wheel. One thing I did not consider ahead of time, since my intent was to merely replace the flat plate that came with my trailer jack and make it easy to swing and roll the trailer, was that the tubular part of the mount would contact the similar piece on the jack when the trailer was right about level, and prevent lowering the front of the trailer any further. I don't see this as a huge issue for my application, but it may be for someone else.
I put it on an 8' cargo trailer, and it is beefy enough to push the trailer around on concrete.
Fast service like three days total from ordering to sitting on my property. I received great friendly customer service from Amy J, she helped me locate all the items I needed for my second order of a new trailer jack and accessories. She also helped setup a return for my 1st ordered items which I purchased in error, as it turned out not being a good choice for my particular trailer…This is a good company with good employees/5 Stars
I bought an utility trailer for $1300 from a local hardware store you would like to think the caster wheel come with it. I turn to etrailer and you had what I need and you ship it fast! The wheel is built very well, thank for the follow up e mails.
Tracy B.
6/17/2017
I still love it! I used this many times and it was a great help.
The ordering process was easy with curtious and knowledgable staff. Product shipped promptly. On arrival it fit & functioned properly. This product has been a great purchase at a very reasonable price. Have purchased other products and will continue to shop etrailer thank you.
Ron B.
3/8/2018
Just letting everyone know lm still very pleased with my purchases.
The removable wheel for A-Frame trailer jacks works as specified, quality and performance meet our expectations. The price was a great value for such a quality product. Delivery was very timely. The hard and strong wheel material was otherwise hard to find. The wheel with 2000 lb capacity attaches to our front A-frame trailer hitch's jack and helps us to move our 20 foot covered trailer (toy hauler) around, especially to line up easily with our RV.
I bought a trailer at a local farm supply store with an A-frame Jack and with the skid plate on the jack it was too hard to move. I ordered the Jack wheel from etrailer and it came approximately a week later. The wheel was very high quality and fit perfectly in my trailer Jack after removing the skid plate. It works perfectly.
wheel was prefect size and hole was in proper location. Took a couple of minutes to install. Only downside is there is less ground clearance than with the skid. But I will accept that tradeoff. Trailer can't be modified for swing up trailer jack like my boat has.
I bought this wheel sight unseen, it is really heavy duty and should be able to push trailer to any position with no problem at all. I drilled a hole thro jack stand for the pin, and the wheel fits tight around the jack stand. Perfect for my use.
The wheel was heavy duty and stable but it's interface with the existing jack stand wasn't very stable. That is due partly to my jack stand but also the short height of the adapter on the wheel.
The product was shipped fast & undamaged. what we all like!Wish I could get all service from enternet this way,just want to say thank you much,to all employers at "etrailer!" P.S.the trailer jack wheel just what I wanted Kansas customer
After careful measuring I used this item to replace a fixed jack wheel from the same manufacturer. I needed better clearance over some uneven ground in my yard. I sawsall-ed the existing wheel off, drilled holes in the jack shaft and installed this on my trailer. Now I can remove it when necessary and get at least 6 inches extra ground clearance. Great...just what I needed.
Excellent product that is American Made to boot!!! This makes moving my mobile offset smoker (that weighs over 1k pounds) in and out of my garage a breeze. My only gripe is not buying it sooner. Also, the diameter of this wheel is 6 inches. I mention this because at the time of my purchase this bit of info was not available on the product information page. Which I didn't quite understand as wheel size is perhaps the most important detail.
a very good product. My last trailer I purchased I bought a similar wheel with the trailer and when I got home I found it would not fit. My new trailer I got my wheel from etrailer and it fits perfect and rolls very nicely.
This item is fantastic it allows me to move my custom motorcycles in enclosed trailer around by hand and I would recommend this to anyone who has a 2 inch wide diameter need for something to be moved by hand.
Removable wheel works as advertised. Dimensions were as specified the narrative. the shipping from MO was quick and was delivered by UPS a day earlier than projected.
Make sure to measure the inside diameter of the jack you are ordering this for. Otherwise, it will be too big. This is a very strong, well made caster.
WORKS JUST FINE NOW I CAN MOVE MY TRAILER AROUND.
Works good
Daniel S.
4/29/2018
Still working good.
The construction of this wheel is amazing. It works like the more expensive ones, and is a real value.
It has worked very well for me and been very good and useful. Well made. Just what I needed.
excellent part stronger than original.Fast shipping/thanks-it is difficult to buy a part without seeing it in person/but your part exceed my expectations .I will come back for future needs..
Works as advertised.
Website was great with enough options with details to make quikc selecdtion. Placing order and delivery was complete, on time and accurate.
Works great
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Tony
5/8/2024
A year in and Ive had no issues with this wheel. I only use it when storing the trailer at home, but do roll it around a bit by hand to get the trailer where I need to store it. It rolls freely on concrete and over a brick border, and stays aligned rigidly to the jack body, no shaking at all. Very satisfied with this sturdy wheel.