Hand Winch Strap with Safety Hook, 2" Wide x 25' Long - 4,000 lbs.
(89 reviews)
Price: $24.50
In Stock
Hand Winch Strap with Safety Hook, 2" Wide x 25' Long - 4,000 lbs.
Item # DL24249
Retail:$42.44
Our Price: $24.50
You Save: 42%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (89)
- Q & A (0)
- Videos (2)
- Photos
Dutton-Lainson Accessories and Parts - DL24249
- Trailer Winch
- Cables and Straps
- Straps
- Dutton-Lainson
- 2 Inch Wide
- 2600 lbs
- 25 Feet Long
Hand winch strap with a safety hook.
Features:
- Heavy-duty winch strap with hook
- Includes mounting hardware
- Made in the USA
Specs:
- Strap dimensions: 2" wide x 25' long
- Maximum load strength (break strength): 4,000 lbs
- Safe working load limit (WLL): 2,600 lbs
Note: Winch straps should always be chosen according to their safe working load limit (WLL). The item being towed must not exceed the WLL of the strap being used. To determine the maximum load, or break strength, of the tow strap, simply multiply the WLL by 3. The WLL is always one-third (1/3) of the maximum load.
24248 Hand Winch Strap with Safety Hook Model 6250, 2" Wide x 25' Long - 4,000 lbs.
Video of Hand Winch Strap with Safety Hook, 2" Wide x 25' Long - 4,000 lbs.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Dutton Lainson Hand Winch Strap with Safety Hook Review
Zach: Hey everybody, Zach here at etrailer.com. Today we're going to take a look at a replacement winch strap from Dutton-Lainson. This is going to be ideal if you've worn out or damaged your boat winch strap. And this is going to be a two inch by 25 foot in length. So it's pretty decent length and is pretty standard size when it comes to that width. Now, this isn't just for Dutton-Lainson winches.
This can also go on other winches. I have it on a Fulton F2 on here today, so it's a really nice way to swap one out and it's got a good material to it. I'm going to loosen this up just a little bit. You can see there, this is a lot like a seatbelt material. It's slick, so I think it's going to do a good job of wrapping around itself.
I don't think it's going to get hung up on anything.Now, when we take a look at the hook on the end of it, it's a pretty standard hook. It seems a little small. It's not like you need something that's really large. If you're in this size strap you're not looking for anything that's really large, but it seems to operate okay. I've tested out some Fulton replacement straps.
I personally like those hooks a little bit better. They look very similar. They just seem to be a little larger, operate a little bit smoother. But overall, this is still going to be a really nice setup for you. It has a working load limit of 2,600 pounds, so that is a pretty good capacity.
That is larger than this boat. It's definitely okay to be safe with that. Now that working load limit, when I say 2,600 pounds, you've got to remember your boat is in the water. This isn't a dry pull weight. You don't want to exceed that. And if your boat does weigh a little bit more than that, it's okay because that water is helping you out with that.But when it comes to keeping it secured to your trailer, you have a few other straps in places as well so they're all working together to make sure that you have that strapped down properly. Overall, it's pretty easy to swap out. All I had to do was for this one I took the lid off just to access down in the winch. But if you have an exposed winch, usually it's just a bolt that runs through it and it's held in place with a nut. Now this does come with a couple different bolts to fit that need. If you have a center cross pin like this style, it will also work with that loop end.Let's just walk you through how we got this one put in place. To get these swapped out, first, you need to extend out your old worn out strap. And with this Fulton winch here today, this one's a little bit different than some. The way this one works is this is held in place with this loop end with that pin there. So it's just a loose pin that locks itself in place to that center section. Some winches have a bolt nut, and that's where that included bolt and nut will come in handy. I'm going to set this one aside and get my new winch strap ready.And then we can take the new strap and we're going to do the opposite. So we're just going to feed it through there. And I'm going to use that pin again. This is when you would just put that bolt and nut in place, and then you just pull it until it gets tight there and we can start ratcheting it back up. Then when we get to the end, we can get that hook in place on our bow eye there and take out the rest of that slack. Now, the first time you put this on, if you don't have any tension in place, the strap will be loose sitting on itself. So you'll want to make sure that you're getting all that out of there.Let it pull on itself a little bit, and we'll be good to go. You can see that one wasn't too difficult of an installation, even for having a different brand of winch like this Fulton one. So whether you have a Dutton-Lainson winch or a Fulton or another brand, this is going to be a really good replacement and especially if you're looking for something with a little bit higher capacity. But that's going to do it for our look at the Dutton-Lainson Replacement Strap for winches..
Customer Reviews
Hand Winch Strap with Safety Hook, 2" Wide x 25' Long - 4,000 lbs. - DL24249
Average Customer Rating: 4.8 out of 5 stars (89 Customer Reviews)
Hand winch strap with a safety hook.by: Rick 04/02/2024
great service as always and the color of straps I was expecting!
thanks George!
by: Jay 03/22/2024
Very pleased with my order and shipping was lightning fast.
by: Allen 05/01/2024
Arrived well packaged and on time. Great product
by: Paul A09/18/2023
It 5’ longer than the stock strap / same quality …just what I needed to haul my car onto the trailer
by: Elsie04/10/2020
I used it to make a door lift with the wench I got from you and both work great I used a drill on the wench it will open and close and also hold it open when needed fast shipping and great products
by: Paul S.08/09/2014
Shipment came 3 days after ordered! I expected on average 10 days.
The Dutton-Lainson Winch is sooo far superior to the winch provided by the trailer manufacturer. I have a 20 ft. tunnel hull bay boat. Tunnel Hull boats are very difficult to maneuver at low trailer loading speeds. The 25 ft. strap allows me to back the trailer in the launch, pull the strap to the boat hook, and reel in. The two speed winch makes this very easy and fast. This set-up prevents damaging the boat by misalignment with the trailer bunks and shallow guides. Great Service with a Great Price!
by: Luke 05/18/2023
As usual eTrailer products ship quickly and are high quality.
by: Patrick 11/29/2019
Installed on boat trailer stored in British Columbia, easy install, works fine, quite happy. Tks
Patrick W.
12/1/2020
Havent seen it for a year since I put it in the barn last Sept. Worked fine then, thankyou
by: Sid12/09/2016
I installed & used the 2 speed winch. It works easily to which up a 18" boat with a 115 HP engine. I am happy with it.
Sid
12/9/2017
OK but I like to use the brake as a damper for launching, but as it is steel to steel it chatters. I am going to replace the hub with brass, I am disappointed that you didnt offer that option.
by: Scott 11/29/2022
High quality strap fits snugly in the w inch.
by: Chad09/10/2022
I ordered the 25 foot strap on two separate occasions and spoke to "customer service" each time and BOTH times they sent a 15 foot strap. No apologies, lag time in refund, having to ship back their mistakes, no thanks. I look for usa made products on other sites now.
by: Marty09/15/2014
Fit on the winch in place of rope worked out great
Marty
9/15/2015
still works like the day I installed it
by: Mark S.05/03/2014
The winch strap was as advertised - great product at a fair price.
One thing tho' - the nut on the attachment bolt was not a lock nut
which is what the winch instructions called for. Otherwise it was fine.
by: Soundview09/14/2021
Product looks good but shipping packaging was very very poor. All items just thrown in a cardboard box with clear plastic wrapping. No pride in product shipped. Cannot give more than 2 stars because of the packaging.
by: Rcb07/27/2020
Great winch. Bolted right on my 1985 Shorelander trailer with no modification. It has been on my trailer for one year outside in all Ohio weather and still looks and operates like brand new.
by: Robin03/30/2019
Strap placed on Fulton 2 speed 2600. Loaded onto to winch easily.
by: jason c05/23/2015
I had trouble finding the correct replacement for my winch. They were all too thick and couldnt get enough strap on the reel. However these were the same as the original equipment and worked great.
by: Sonny04/04/2022
Perfect pairing for my dutton-lainson w inch
by: Tom G07/17/2020
Good quality strap and hook, great service from eTrailer!
by: eszoom10/08/2019
The strap was perfect for replacing the strap on my winch. The strap was delivered quickly and was excellent quality.
by: BruceBruce D.02/14/2018
These straps are the perfect answer to my winch situation and fit my winch as specified. The buying process was perfect and came earlier than expected.
Great service !!
by: Richard 01/21/2023
Excellent product and as usual, the delivery time was great!
by: Andy J09/25/2016
Wow! I gonna be honest, I'm not the best at turning wrenches. I was able to order everything for my trailor easily. Then it was delivered like fast.
by: Nathan N.07/01/2016
Nice stitching on the ends and made in the USA.
by: Dave S01/09/2016
Good quality, easy to install, great web site with very descriptive videos
25
89
Show More Reviews
See what our Experts say about this Dutton-Lainson Accessories and Parts
- Longer Strap Recommendation for Fulton 1,800 lb WinchOriginally your winch came with a 2 inch wide 20 foot long strap. For a strap that would fit as a replacement and be 5 feet longer we have the Dutton Lainson part # DL24249 which is a great option that has a 4,000 lb capacity.
view full answer... - Can 2 Inch Strap Be Used with Dutton-Lainson Hand Winch # DL15504You can indeed use a 2 inch wide winch strap like the 25 foot long # DL24249 with the Dutton-Lainson Hand Winch # DL15504 that you referenced. This particular winch can be used with either a polyester strap like this one or wire rope, so you are good to go! The winch features a 1,800 pound capacity. I have attached a short video demonstration that you can also check out.
view full answer... - Winch Availability Similar to Dutton Lainson 1802 and Shelby 5404Your Dutton Lainson DL1802A is an 1,800 lb winch which would be the closest to the # DL15502. This would be a great option. The Shelby 5404 winch is a 1,200 lb winch with a 20 foot nylon strap. The Dutton Lainson part # DL14996 is a similarly rated 1,500 lb winch and for a strap you would need the part # DL24249.
view full answer... - Replacing a Shelby 5407B Winch Rated for 1,700 lbsTo replace your 1,700 lb Shelby 5407B winch I recommend the Dutton-Lainson Single Speed Winch # DL14627 which is rated for 1,800 lbs. This winch features permanently lubricated bearings, high carbon steel gears, and a Zinc TUFFPLATE finish for corrosion resistance. The drum can handle up to a 9/32" x 58' cable or a 38' strap, is made in the USA, and comes with a 5-year limited warranty. For a compatible cable I recommend part # DL24045 and for a strap I recommend part # DL24249.
view full answer... - Can a Winch Cable Be Replaced with a Hand Winch Strap On a 2006 Aluminum Loadrite TrailerWith a 5,200 pound rated trailer and a 4500 pound boat you are getting to the upper end of the capacity rating for winches with a strap. That is most likely why your winch has a cable installed on it. Some winches are set up so that a cable or a strap with hook can be used. If a strap, item # DL24251, can be used on your winch there will be holes in the cable drum sides, directly across from each other, to put a bolt through that the strap attaches to. If your drum is not set up in this...
view full answer... - Recommended Strap-Compatible 1000 lb Brake WinchWe've got just the winch you're looking for. I'd recommend the # DL14996 Dutton-Lainson 1500 lb hand winch. Dutton-Lainson winches are extremely durable, well designed, reasonably priced and manufactured in the USA. This 1500 lb capacity brake winch has a brake which will prevent the load from moving or the handle from freewheeling when you stop cranking, but also has a freewheel mode so you can play the line out manually. The winch can also be used with either a cable or a strap. The...
view full answer... - Does Dutton-Lainson Hand Winch Use Strap or Cable?Hi! The Dutton-Lainson Hand Winch # DL14825 does not come with either strap or cable. You would need to get those separately with either Hand Winch Strap with Safety Hook # DL24249 or Hand Winch Cable with Safety Hook # DL24102; both the strap and the hook are 25' long.
view full answer... - Can Dutton Lainson TW4015 Electric Winch Be Powered From Vehicle's 7-way Trailer ConnectorYou could use a 25' x 2" strap like part # DL24249. The maximum power draw of the Dutton-Lainson # TW4015 StrongArm winch is 40 amps, which would blow the fuse/circuit breaker on the 12-V feed to the 7-way of most vehicles, which is usually protected by a 30A breaker, and the winch could exceed that. The best practice would be to use a quick connect harness like part # DL24151 and wire the winch directly to the vehicle battery.
view full answer... - Will a 25 Foot Long Strap Fit Fulton F2 Fully Enclosed Trailer Winch FW16000101You could use Hand Winch Strap with Safety Hook, 2" Wide x 25' Long - 4,000 lbs. # DL24249 in place of the 20 foot strap that comes with Fulton F2 Fully Enclosed Trailer Winch with Strap and Adjustable Handle - 1,600 lbs Item # FW16000101. However you may not be able to fully wind all 25 feet of the strap onto the drum since it is 5 feet longer. I have linked videos on the winch and strap for you.
view full answer... - Replacement For The Shelby Model 5407B Hand WinchI recommend part # DL14627 which is a Dutton-Lainson winch rated for 1,800 pounds to replace your 1,700 lb Shelby 5407B winch. The drum can handle up to a 9/32" x 58' cable or a 38' strap, is made in the USA, and comes with a 5-year limited warranty. This winch features permanently lubricated bearings, high carbon steel gears, and a Zinc TUFFPLATE finish for corrosion resistance. Finally it also bolts onto the same mounting bracket as your existing winch, making for easy installation....
view full answer... - Can a Strap be used on the # DL10950 Worm Gear Hand WinchThe Dutton-Lainson Worm Gear Hand Winch - 1,500 lbs, item # DL10950, is designed only to be used with wire cable and a strap cannot be used with this winch. None of the worm gear winches that we stock are designed to be used with a strap. You may be interested in the Dutton-Lainson Freewheeling Brake Winch with TUFFPLATE Finish, Self-Locking - 1,500 lbs, item # DL14996, which can be used with the Hand Winch Strap with Safety Hook, 2 inch Wide x 25 foot Long - 4,000 lbs., item # DL24249.
view full answer... - Hand Winch Recommendation for Tow Dolly for Pulling Up Full Size TrucksA brake hand winch I recommend is the Dutton-Lainson two speed # DL14830. It has a capacity of 2,500 pounds. At a 5 percent incline, you will have a rolling load maximum of 16,675 pounds. At 10 percent incline, you will have a rolling load maximum of 12,550 pounds which would be more than enough. A hand winch strap with safety hook # DL24249 is worthwhile to get because it has a breaking strength of 4,000 pounds. An extra piece of mind when you are pulling your car up an incline. A hand...
view full answer... - Does Dutton-Lainson Hand Winch DL14964 Include A Strap/Winch Cable?The Dutton-Lainson Hand Winch w/ Automatic Brake - TUFFPLATE Finish # DL14964 you were looking at does NOT include a strap or a wire cable. Since you prefer a strap I recommend going with the 2" Wide x 25' Long Hand Winch Strap # DL24249 which will fit in the drum perfectly. For the most up-to-date pricing information please use the included link to be taken to the product page. You will need to install the strap as that is not something we are able to do before shipping the products,...
view full answer... - Shelby 5408B Winch Replacement RecommendationThe max rating of your Shelby 5408B is 1,900 lbs which would be more than adequate for a 2,200 lb boat as typically the ratio for winch capacity to boat weight is 2 to 1. For a similarly rated winch we have the part # DL14627 which is rated for 1,800 lb. For a strap to use with this we have the part # DL24249.
view full answer... - Cable Recommendation for the Dutton Lainson Winch part # DL14830 that is Longer than 38 feetThe Dutton Lainson Winch part # DL14830 that you referenced can accommodate up to a 38 foot strap, but the longest strap we offer is 25 feet like the # DL24249. Since this winch can also have a cable used on it a better option would be to go with a cable like part # DL24045 that is 50 feet in length. I attached an FAQ on hand winches for you to check out as well.
view full answer... - Recommended Hand Winch For Loading And Unloading Go-Kart In Pickup TruckI recommend a 2-speed winch with a hand brake for loading and unloading your go-kart. The winch I recommend is the Dutton-Lainson, part # DL14730. This winch has a capacity of 2,000-lbs and can use either cable or a strap. The gear ratio can be changed so you have better control of your go-kart. If you want to use a strap I recommend part # DL24249. for cable I recommend part # DL24045. You will want to make sure you have a secure location to mount the winch.
view full answer... - Can A Strap Be Used With Dutton-Lainson Brake Winch # DL14964I spoke with my contact at Dutton-Lainson about the Dutton-Lainson Winch, part # DLB1500A. They told me that this winch is capable of using either a cable or a strap. Since the barrel is 2 inches wide, the Hand Winch Strap, part # DL24249, would work for your winch. The strap has a load capacity of 4000 lbs and can be used on winches with a weight capacity up to 2600 lbs. This strap also comes with a safety hook attached.
view full answer... - Recommended Replacement Winch and Strap for 16 Foot Skiff BoatFor a replacement winch on your boat trailer, I recommend looking at the Dutton-Lainson Hand Winch # DL15502. This is a great 2-speed winch with has a zinc TUFFPLATE finish that will allow for frequent marine use. It has a 1,800 pound capacity with a drum ub diameter of 7/8 inches. For the Hand Winch Strap, you will use part # DL24249. I have attached a video demonstration of this winch as well as the installation details for you to check out. I have also included a link that will take...
view full answer... - Replacement for Shelby 5470 Trailer WinchShelby has gone out of business and as such there are no replacement parts we can offer for your Shelby 5470 winch; due to that the best option is going to be a replacement winch. For this I highly recommend the Dutton-Lainson Hand Winch # DL14825 because it is a 2-speed winch like your Shelby and allows you to use either Strap # DL24249 or Cable # DL24102. This winch has a 2,500 lb capacity, comes with a 5-year warranty and is made in the U.S.A. I have added a link to a video review...
view full answer...
- Corrosion Resistant Winch for Public Outdoor Sand Volleyball CourtsIf you will have a minimum of 50 pounds load on the winch then you can use Dutton-Lainson brake winch # DL14934. It has a zinc TUFFPLATE finish so it is corrosion resistant. It can be used with a cable, such as # DL24045 or a strap such as # DL24249. I have linked a video review of this winch for you. If the load is going to be less than 50 pounds then another option is a worm gear winch such as # DL11011. Worm gear winches are great for more control over the position of the load. As such...
view full answer... - Is the Dutton-Lainson Worm Gear Hand Winch, # DL10970 Salt Water Resistant for Marine ApplicationsThe Dutton-Lainson Worm Gear Hand Winch, # DL10970, is made of laminated steel gears and a steel base, which is powder coated for some protection, but it is susceptible to the elements and corrosion. Instead, a better option would be the Dutton-Lainson Hand Winch, # DL14730. This winch has a Zinc plated yellow chromate TUFFPLATE finish has three times the corrosion resistance of standard zinc plated trivalent chrome process and 30 percent greater corrosion resistance when compared to...
view full answer... - Recommended Winch Easier to Use for 2,000 Lb Boat on TrailerIn order to get a mechanical advantage which will help with winching the boat up and ease the strain on your back, you'll want to consider a two stage winch. This will make it take a bit longer to retrieve the boat but it will also make the task much easier on yourself physically. I recommend the Dutton-Lainson Hand Winch part # DL14521 which has a 1,600 lb weight capacity. I recommend using this winch with the Hand Winch Strap with Safety Hook part # DL24249. I have attached for you below...
view full answer... - Will The Dutton-Lainson Winch Work For Loading a 600 LB Motorcycle on Trailer with DrillThe winch you referenced is the Dutton-Lainson Winch, part # DL14730. It has a capacity of 2000 lbs, so it will certainly handle the 600 lbs you mentioned the motorcycle weighs. This winch features a reversible ratchet, hand brake, and has a quick attach handle. I would also recommend the Hand Winch Strap with Safety Hook, part # DL24249. This strap is 2 inches wide and 25 feet long, and has the safety hook attached. The strap has a capacity of 2600 lbs. This combination does not have...
view full answer... - Boat Winch Recommendation for a 20ft Pontoon Boat With No RollersWhen it comes to choosing a winch for a boat trailer, there are a few general rules we can use. The boat-size-to-winch capacity is generally 2 to 1. With good rollers and short winching distances, the ratio can increase to 3 to 1 and with wooden bunks and long winching distances, you will want to reduce the capacity to 1 to 1. When your're loading and unloading much of the weight is supported by the water, which will lighten the load. However, it is better to go with a winch with higher...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Video by:
Andrew K
Video Edited:
Jacob T
Installed by:
Cole B
Installed by:
Zach D
Expert Research:
Jeffrey L
Updated by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Paul S.
8/10/2015
Still working Great! Only possible improvement in my mind is if someone else trailers my boat for me.