Bulldog Winch Hardware for Universal Mounting Plate for Truck Winches - 10 mm x 30 mm

See what our Experts say about this Bulldog Winch Accessories and Parts

• Universal Winch Mount for Use on Tractor
  We have Universal Winch Mounting Plates like # BDW20291 that you referenced and also # BDW20019, as well as hitch mount types like # BDW20155. Universal mount # BDW20291 can use hardware kit # BDW20297. Since the front ends of Massey Ferguson tractors vary quite a bit you'll need to decide which mount is best for your install.
  view full answer...
• Recommended Winch Mounting Hardware for 9000 lb Warn Winch
  The winch mounting hardware is 10mm and I have listed the kits below: -Bulldog Winch Mounting Hardware - Grade 5 -Truck - 10mm x 40mm - Set of 4 # BDW20180 -Bulldog Winch Hardware for Universal Mounting Plate for Truck Winches - 10 mm x 30 mm # BDW20297 -Bulldog Winch Mounting Hardware - Grade 5 -Truck - 10mm x 30mm - Set of 4 # BDW20179
  view full answer...
• Winch Mounting Plate Needed for Aluma 82 Series Car Hauler Trailer
  While we do have a variety of winch mounting options, I can't say for certain that any of them are a specific replacement for your Aluma Series 82 car trailer. With that being said, we do have a universal winch mounting plate as part # BDW20291 which you'll want to pair with the mounting hardware # BDW20297 to complete the setup. If this works then great! If not, then I recommend reaching out to Aluma about that part directly.
  view full answer...
• What Bolts Do I Need To Mount My Winch Bracket To My 1997 Ford Explorer?
  We may have the hardware you're needing depending on the winch you're planning on using for your 1997 Ford Explorer. For example, for Bulldog winches, we have the: -Bulldog Winch Mounting Hardware # BDW20180 which contains 4 grade 5 10mm x 40mm bolts. -The Bulldog Winch Hardware for Universal Mounting Plate for Truck Winches # BDW20297 which contains 4 grade 8 10mm x 30 mm bolts. & -The Bulldog Winch Mounting Hardware # BDW20179 which contains 4 grade 5 10 mm x 30 mm bolts. If you...
  view full answer...
• Mounting Plate Options for the Bulldog Winch Standard Series Off-Road Winch # BDW10043
  You can either use the Universal Mounting Plate # BDW20291 (which requires the hardware kit # BDW20297) or the Hitch Mounting Plate # BDW20011 for your Bulldog Winch Standard Series Off-Road Winch # BDW10043. Both have compatible mounting hole dimensions (10" x 4-1/2") so it just depends on where and how you plan on using the winch.
  view full answer...
• Bulldog Universal Winch Mounting Plate Dimensions
  The Bulldog Universal mounting plate # BDW20291 has overall dimensions of 7-3/8 by 20 inches. The plate is 1/4 inch thick and the fairlead portion sits up about 4-1/2 inches according to my contact at Bulldog. The holes for the fairlead are 10 inches apart center to center. You will want the hardware # BDW20297 for the recessed holes outlined in the attached video.
  view full answer...
• Front Wiring Kit Recommendation for 18.5K Bulldog Winch Heavy-Duty Series Off-Road Winch
  The wiring kit I recommend using to power your Bulldog Winch Heavy-Duty Series Off-Road Winch # BDW44FR at the front of your truck is found as part # BDW20025. This comes with 2 Anderson-style connectors and 7-1/2' of wiring to reach from your battery to the front of your truck. If you don't already have a mounting plate I recommend checking out the Universal Mounting Plate # BDW20291 and using the Mounting Hardware # BDW20297 to complete your installation. Attached are some review videos...
  view full answer...
• What Is the Capacity of the Bulldog Winch Universal Mounting Plate for Truck and Trailer Winches
  The Bulldog Winch Universal Mounting Plate for Truck and Trailer Winches part # BDW20291 can be mounted to a flat-bed trailer using the Bulldog Winch Hardware for Universal Mounting Plate for Truck Winches part # BDW20297. The winch plate will first be set into place where you want to position it, then drilled and bolted to the frame. The plate has counter sunk holes which you'll use with the above hardware to attach the plate to the frame. There isn't a rated capacity as it all comes down...
  view full answer...
• Bulldog Winch Hitch Mounted Winch Mounting Plate with Handles with Badlands ZXR 9000-lb Winch
  From what I was able to determine, the Badland ZXR 9000-lb winch uses standard 10" x 4.5" bolt pattern, which will work well with the available mounting pattern on the Bulldog Winch Hitch Mounted Winch Mounting Plate with Handles # BDW20011. You will want to use the Bulldog Winch Hardware for Universal Mounting Plate for Truck Winches # BDW20297 to mount your Badlands ZXR 9000-lb winch to the Bulldog Winch Plate.
  view full answer...
• Recommended Mounting Plate to Mount 9K Badland Winch Onto Car Trailer
  I recommend using the Bulldog Winch Universal Mounting Plate for Truck and Trailer Winches # BDW20291 for your Badland Winch, which has a 4-Bolt mounting pattern (center on center) of 10" x 4-1/2". For hardware you will want to use the Bulldog Winch Hardware for Universal Mounting Plate for Truck Winches # BDW20297.
  view full answer...
• Winch Mounting Plate Recommendation for Bulldog Winch # BDW10041 On Floor of Utility Trailer
  A better solution for a mounting plate for the Bulldog Winch part # BDW10041 that you mentioned would be the universal mounting bracket part # BDW20291 which is larger than the mount you mentioned. Then for hardware we have the part # BDW20297 which fits the countersunk holes of the mount.
  view full answer...

Do you have a question about this Accessories and Part?