What Bolts Do I Need To Mount My Winch Bracket To My 1997 Ford Explorer?

Question

Question:

I am installing a winch on a 1997 ford explorer....I need to know what size bolts I will need...am attaching the winch bracket to the frame..and about how many..

asked by: Fred W

0

Expert Reply:

We may have the hardware you're needing depending on the winch you're planning on using for your 1997 Ford Explorer.

For example, for Bulldog winches, we have the:

-Bulldog Winch Mounting Hardware # BDW20180 which contains 4 grade 5 10mm x 40mm bolts.

-The Bulldog Winch Hardware for Universal Mounting Plate for Truck Winches # BDW20297 which contains 4 grade 8 10mm x 30 mm bolts.

&

-The Bulldog Winch Mounting Hardware # BDW20179 which contains 4 grade 5 10 mm x 30 mm bolts.

If you can let me know what winch bracket you're trying to use, I can see what we have for you.

expert reply by: Bryce D

0

Answer 1

The Superwinch Winch 2 Go 4000 SR, part #SW1140232, is designed fto operate with power input from the batteries typically found in lawn tractors, ATVs, UTVs or motorcycles. Naturally, the higher the battery capacity the more running time. According…

view full answer...

Answer 2

We can help you with an electric winch and wiring kit for installation on the tongue of your tilt-bed car hauler trailer. Winches, like jacks, are best selected with a healthy safety margin in their weight capacity. For example, for an actual need of…

view full answer...

Answer 3

In regards to the Bulldog Winch Trailer Winch part #BDW15020, the remote hooks up to the junction box which has power leads that run to the battery. The junction box houses a circuit breaker so there is no in-line fuse needed, simply hook the power…

view full answer...

Answer 4

There is not a standard cold cranking amp rating for all 2,500 lb winches. They will each be different as they do not all draw the same amount of power, therefore the manufacturer will specify this. If you take a look in the owner's manual for…

view full answer...

Answer 5

You would want to go with a deep cell battery. Having a battery larger than you would need would be the way to go as having a battery that is similarly rated as the draw of the winch will drain it quickly. We don't carry any deep cell batteries…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 8

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

What Bolts Do I Need To Mount My Winch Bracket To My 1997 Ford Explorer?

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching