Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
(80 reviews)
Price: $153.78
In Stock
Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
Item # AKHD-545-35-G-EZ-K
Our Price: $153.78
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (80)
- Q & A (0)
- Photos
etrailer by AxleTek Trailer Hubs and Drums - AKHD-545-35-G-EZ-K
- 5 on 4-1/2 Inch
- For 3500 lbs Axles
- Hub with Integrated Drum
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Easy Grease
- EZ Lube
- 1/2 Inch Stud
- L44649
- L68149
- etrailer
Galvanized hub-and-drum assembly is ideal for marine use. For electric or hydraulic brakes. Fits 3.5K E-Z Lube and Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.
Features:
- Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
- Compatible with electric and hydraulic drum brakes
- Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy
- Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
- Sturdy iron construction
- Galvanized finish on drum offers excellent corrosion resistance
- Ideal for use on a boat or snowmobile trailer
- Zinc-finished bolts resist corrosion
- Bearings, races, grease seal, grease cap, and lug nuts are included
- QAI and CSA certified
Specs:
- Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles
- Compatible with standard axles from most manufacturers, including AxleTek, Dexter, Lippert (LCI), and AL-KO
- Actual drum dimensions: 10-15/16" diameter x 2-11/16" wide
- Works with 10" brake assembly
- Bolt pattern: 5 on 4-1/2"
- Wheel studs: 1/2" diameter x 1-1/4" long
- Grease cap flange diameter: 1.99"
- Weight capacity: 1,750 lbs
- Limited 1-year warranty
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: L68149 (1.378" inner diameter)
- Outer bearing: L44649 (1.063" inner diameter)
- Races (included)
- Inner race: L68111
- Outer race: L44610
- Grease seal (included): 58846
- Inner diameter: 1.719"
- Outer diameter: 2.565"
Thoroughly Tested for Safety
This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. This assembly underwent extensive testing to measure stopping distances when braking. This assembly has also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.
E-Z Lube and Easy Grease-Compatible Assembly for Simple Lubrication
The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
BD2-545-97 AxleTek 10" Hub and Drum Assembly for 3.5K Axle with Hardware - 5 on 4-1/2 - Galvanized - EZ Lube
Compare to Dexter 8-247-50UC3-EZ
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- etrailer mistake
Customer Reviews
Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized - AKHD-545-35-G-EZ-K
Average Customer Rating: 4.6 out of 5 stars (80 Customer Reviews)
Galvanized hub-and-drum assembly is ideal for marine use. For electric or hydraulic brakes. Fits 3.5K E-Z Lube and Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.by: Greg10/09/2023
Affordable option for my 1999 boat trailer rebuild. Out of country manufacturing quality is less than more expensive options.
by: Marc05/09/2024
First off i hate writing bad reviews but hoping this may help someone else. Drums, backing plates, all that seems to be ok but the bearings and seals are complete junk. If you buy this, i recommend using a different brand of bearings and seals. Both sides failed within 1 year and little miles. You may ask were they packed correctly and the answer is yes. I have never had parts fail like this and etrailer wasnt really willing to do anything
by: Michael 12/16/2023
Very pleased with product. Exactly as described. Easy install. Wont know about long term results on my snowmobile trailer until i use for a season or two. I have very high hopes these will be very good. Finally something that appears to be worth the money.
by: Greg S.07/31/2020
Worked perfect for my 85’ ez loader to replace my old rusty worn out hubs. Seals were easy to install and works great with my bearing buddy’s. Love having them galvanized. Shipping was fast & etrailer support was fantastic to ensure I was selecting the correct part.
by: Mike 03/26/2024
They work perfectly.
by: Jimmy03/04/2024
great product
by: David02/16/2024
Worked great
by: JosephA01/31/2024
Worked very well. On a difficulty scale of 1-10, with 10 being the hardest, this was a 3.
by: Jonathan04/14/2022
The Hub Drum matched perfectly with the setup that was there before. I am giving them five stars because everything was how they said, and it matched perfectly. I wish they also add a cotter pin to the kit. That way, you do not have to go and get one to complete the job.
by: The Trailer Doc & Fab Shop06/26/2023
NICE HUB DRUM COMBOS!!
by: Greg L08/16/2017
Just what I was looking for. GALVANIZED DRUMS for my 4 place snowmobile trailer. Purchased the etrailer drums vs Dexter. Will see how they hold up to the WI,MI. Salts roads. Only wish someone made galvanized electric brake assemblies for the 3500 lb axles. SALT BAD I see galvanized 3500 lb torsion axles for my next purchase.
Greg L.
8/20/2018
Made it through 1 season in Wisconsin and UP roads. Still look like new. Have not taken a drum off yet to see how the pads and inner parts look. That’s on the fall to do list. Thanks
by: Axel07/23/2020
The HUB / DRUM assembly seems to be just right for marine use as it is "galvanized". However, it would have been still better if it had been made in USA not proudly cast in China. Hope it holds up as I have had poor results from Chinese cast iron previously. Great service from etrailer!!
Axel
7/24/2021
Have not had much chance to use the boat since the [corona] virus struck, but, so far so good.
by: Dean07/25/2022
not etrailers fault but packed damaged and arrived one drum short this is needed badly
Brooke M.
8/4/2022
Thanks for letting us know. I will send your information along to our customer service team and they will be getting touch with you soon.
by: at06/08/2022
Based on others' comments, I was a bit apprehensive about actual parts arrival date so contacted etrailer via chat. I was informed that the fairly exact, quoted "est delivery dates" did not include "processing time", so may not be correct, actual arrival could vary. Positive notes - parts did arrive per quoted time (thanks!); website is easy too navigate and provides significant detail to answer basics; when you do get through to sales reps they are knowledgeable; parts were made in China but decent quality. Less positive sides - it takes a long time to get to a live representative (~25-min and over 50-min); chat takes quite a while to connect too, you can only get to sales and not tech support; hub assemblies arrived with bearings/seals/caps and two parts were defective (bent bearing cage and bent bearing seal - i called/chatted and no one really cared or offered a solution, one rep disconnected, said they would call back, never did); drum brake assemblies have studs and ship without 7/16-20 nuts/washers. So, overall good, but contact can be difficult, and make sure you have backup accessory parts (on-hand or sourced elsewhere) to install.
by: Rob09/01/2021
The parts all fit done and my customer service contact was helpful and responsive. The issues I had were with the shipping department. 1) some parts were missing from the initial shipment, 2) the replacement order was placed quickly but shipped via USPS costing me a second weekend delay, 3) the replacement order was missing a bearing so I had to re-use one of my old bearings to get the job done.
Brooke M.
9/10/2021
Thank you for bringing this to our attention! Our Customer Service Team should be reaching out to you in the near future.
by: David02/05/2022
Working great after a year. Everything you need to complete your brake job. I recall that when I bought this, it did not picture or describe whether it came with cotter pins for the castle nuts. I am fairly sure that mine came with the cotter pins...at the time I bought some cotter pins labeled for snowplows and they worked fine too.
by: Jordan06/23/2020
100% will and have ready reccomended etrailer!! I called because I truthfully had no idea what all I needed so I was hoping an expert would help me. My hold time was long, the recording told me approximately how long and it was accurate. Also, it's three weeks before the Fourth of July and everyone wants something to get road worthy. No big deal.
Once Geoffrey was on the phone I was absolutely blown away. He was patient, understood exactly what I was looking for (even though I didn't) and was incredibly helpful in the phone. He took his time to make sure we were going to have everything we needed to get the job done and get camping. He checked to make sure we were ordering the right size, even when our owners manual was super confusing he assisted in how to figure out exactly what we needed.
Shipping... Wow. We placed our order and less than 13 hours later it had been picked, packaged and was on its way to a shipping facility. We received it 2 days after placing the order at 7pm. We are close, but still, that's incredible!
Completely satisfied with every aspect of this experience.
by: Steve Luckesen04/13/2016
I ordered new axle spindles, brakes, u-bolts and hubs from ETrailer at a cost savings of nearly 50% compared to what I would have been charged here on the Oregon Coast. In addition to my cost savings, Shipping on my (70 lb) order was free and it arrived within 5 days. Etrailer's Tech departments and I exchanged several emails and photos concerning a boat trailer spring issue I was having, they were able to not only solved my problem, but they also saved me from the additional cost of buying new springs. I highly recommending this company for whatever trailer items you may need and do call them if you have any questions or issues with your trailer.
by: Steven 11/04/2022
I’ve ordered from you a few times and it has always been a pleasure
by: Steve02/15/2020
I bought a home made trailer and Tim helped me figure out what axles were under the trailer and what products I would need to bring the trailer up to operational standards. He advised me to get the rust resistant hardware and fixtures. The break components are bolt on and pre assembled. A big help for a man my age (71). The easier the better for me. Bearings were in the drums so all I have to do is grease and install. All components are well made and coated with rust resistant material. Tim made the ordering process simple and painless. Cost is competitive and shipping is free over $xx.xx dollars. Who could ask for more. Very Happy customer. Steven
by: Derek02/26/2018
Great service,
One of the major items was going to delay my order, etrailer caught it and emailed an alternate selection that matched exactly. I also noticed one of the adaptors was universal not vehicle specific, they easily canceled the order with no charge. I reordered and it was shipped the same day! Everything was well packed and undamaged on arrival, standard shipping in less than a week!
by: Paul05/28/2021
The hubs were the right fit but some of the spare parts that was packed with them were crushed other than that everything was all right
Sierra K.
6/4/2021
Thank you for your review. Customer Service takes care of all items severely damaged in transit. Please contact them at 800-298-1624.
by: Doug08/31/2021
My items were supposed to arrived on Friday but I did not receive them until Monday. I wanted to put my trailer back together over the weekend so I could go out on Sunday. That didn't happen. Departure what I needed and the shipping was fast. Thank you
by: John Lasater08/13/2019
I ordered brakes and drums but on two separate orders. All the phone people were very good and stuff shipped the same day. Received everything in good order and all fit correctly.
by: Paul K.05/04/2017
etrailer will be the only company I buy any product from. Their parts fit and function great. The team members are professional and give exceptional service. I will be buying another set soon on another trailer. Thanks again E Trailer!!
25
80
Show More Reviews
See what our Experts say about this etrailer Trailer Hubs and Drums
- Parts Needed to Convert Hydraulic Brakes to Electric Brakes on a Boat Trailer 3.5K AxlesTo change your boat from hydraulic brakes to electric brakes you will need to replace the hubs and brake assemblies. The UFP hubs that you have do not have a surface suitable for a brake magnet. You will also need to add wiring for the brakes and a breakaway battery. Here is a list of parts I recommend for your trailer: -3.5K Brake Assemblies # AKEBRK-35-SA -3.5K Galvanized Hubs # AKHD-545-35-G-EZ-K or -3.5K Painted Hubs # AKHD-545-35-EZ-K (if you don't want to spend the extra money...
view full answer... - Determining Correct Replacement Hubs For 2003 Ranger Trail R61 Boat TrailerFrom our experience the Ranger Trail Boat Trailers like your 2003 Ranger Trail R61 use inner bearing # L68149 and outer bearing # L44649 but you will want to confirm this by verifying which inner and outer bearings your trailer uses. You can determine which bearing combination your trailer uses by pulling one of the hubs and looking for the bearing numbers stamped on the face of the inner and outer bearing as shown in the included picture of the # L44649. If your bearings are worn to...
view full answer...
- Compatability of Hydraulic Brake Kit AKFBBRK-35-D and Hub and Drum Assembly AKHD-545-35-EZ-KYes, the Hydraulic Brake Kit # AKFBBRK-35-D is compatible with the Trailer Hub and Drum Assembly # AKHD-545-35-EZ-K. Just note that the hub and drum assembly have a standard black powder coat finish while the brake kit has a dacromat finish that is geared more towards a boat trailer that will be exposed to water. If you're looking for something that is designed to stand up better to water then you'll want to go with the Hub and Drum Assembly # AKHD-545-35-G-EZ-K with the galvanized finish...
view full answer... - How To Add More Stopping Power to EZ Loader Trailer with Drum Brakes on One AxleYes, your best and most cost effective option for increasing the braking on your trailer would simply be to add brakes to the other axle. You really can't go with a larger size without replacing the axle and switching to disc won't increase stopping dramatically considering how much it will cost. Therefore, I recommend a second set of drum brakes and it sounds like you would need the Hydraulic Trailer Brake Kit part # AKFBBRK-35-D and Easy Grease Trailer Hub/Drum Assembly part # AKHD-545-35-G-EZ-K....
view full answer... - Does The Hydraulic Brake Kit # AKFBBRK-35-D Include Hub/Drums? The Hydraulic Brake Kit # AKFBBRK-35-D only comes with the left and right brake assemblies. We do have the Galvanized Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles # AKHD-545-35-G-EZ-K. This hub is sold as an individual item with a 5 on 4-1/2" bolt pattern. It will come with the Inner # L68111 and Outer # L44610 installed in the hub and is designed to mount using the Grease Seal # 58846, with Inner # L68149 and Outer # L44649 Bearings. You will need 2 of these drums for the brake...
view full answer... - How To Determine If Boat Trailer has 10 Inch or 12 Inch Brake AssembliesWhen determining if you need 10 inch or 12 inch brake assemblies there are a couple of easy things to check to confirm the fit for your trailer. The first thing is you can measure the diameter of your hub. The second thing is you can look at the brake flange, if it has 4 bolts then it is 10 inch if it has 5 then it is 12 inch. Because you know you have a #84 spindle we can be confident that you have a 3,500 lb axle and you will need the 10 inch assemblies. I recommend the Hydraulic...
view full answer... - Replacement Brake Kit for a 1995 Mastercraft Single Axle Boat Trailer with 3,500 Lb AxleI have attached for you below a complete list of parts you will need to replace the brakes on a 1995 Mastercraft Single Axle Boat Trailer. It appears you have a standard 3,500 lb axle so the parts are all easily attainable. Trailer Hub and Drum Assembly part # AKHD-545-35-G-K (Standard Spindles) Trailer Hub/Drum Assembly part # AKHD-545-35-G-EZ-K (E-Z Lube Spindles) Hydraulic Brake Kit part # AKFBBRK-35-D Demco Hydraulic Brake Line Kit part # DM5402 Demco Hydraulic Trailer Brake Actuator...
view full answer... - Replacement Parts Needed For Older Horse Trailer With 1.250 and 1.063 Spindle DiametersIt does appear someone put the wrong size inner bearing in your hub as the Bearing # L68149 fits a spindle with diameter of 1.378" while it appears you only have 1.250" on your spindle. This was likely done as you have a spindle size which is no longer commonly used. I recommend replacing your spindles with the #84 Spindle # TRU74FR. This will allow you to use 2 of the Hub/Drums # AKHD-545-35-G-EZ-K with Brake Kit # AKEBRK-35-SA. These will give you updated components and you will be able...
view full answer...
- Recommending A Replacement Hub And Bearings For A 2019 Forest River Wildwood Toy HaulerI am happy to help set you up, but we do not have a database that would tell us bearing sizes based on a year, make and model. If only it were so easy, right? You may be able to get that information from a forest river dealership if you give them your VIN. Otherwise you would have to pull a hub and get the numbers from both bearings. For example a very common hub is a 10" drum for a 3,500 lb axle like part # AKHD-545-35-G-EZ-K. This uses the standard bearing combination with # L68149...
view full answer... - Hub Recommendation for 84 Spindle for Use in SaltwaterYou have a number 84 spindle which we have a hub for. What you would want then is the part # AKIHUB-545-35-G-EZ-K which fits this spindle and is galvanized to help fight saltwater corrosion. This is an idler hub. If instead you need a hub/drum you would need the part # AKHD-545-35-G-EZ-K.
view full answer... - Picking Out Replacement Hub for 1996 Elite Ski Boat TrailerActually both of the hubs you referenced will fit and work great as a replacement for what you have on your trailer currently. Since this is a boat trailer application I'd recommend the # AKHD-545-35-G-EZ-K since it is galvanized and will fight corrosion better than the # AKHD-545-35-EZ-K you mentioned as well.
view full answer...
- Replacement Timbren Axle-Less System and Hydraulic Brake Assembly for 3,500 lb Axles on Boat TrailerI would love to help you upgrade your suspension components! I am guessing that you have 3,500 lb axles on your trailer but if you could verify that it would help me to make sure that I recommend the correct parts for you. Also, are you looking to add brakes to both axles or just keep them on one pair? You would get more braking power and less wear with brakes on all of the axles but if you only want them on one then that will also play into the parts.
view full answer...
- What Replacement Hubs do I Need for My 3500 Pound Boat Trailer Axle?Thanks so much for providing those details! Based on your bearing numbers, you definitely have a 3.5k axle with a 5 on 4-1/2 lug pattern. For replacement hubs, I recommend the Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized # AKHD-545-35-G-EZ-K (if you have E-Z Lube or Easy Grease spindles) or the Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized # AKHD-545-35-G-EZ-K (if you have standard spindles). Both...
view full answer... - Spindles and Hubs To Update 1972 Sanger Boat Trailer To Currently Used Sized BearingsYou are going to want to update the spindles on your 1972 Sanger boat trailer to the more common Spindle # TRU74FR. This will give you the current common bearing sizes for a typical 3,500lb axle as we do not carry either of your bearing sizes. You will need to pair the new spindles with new hubs. We have either an Idler Hub # AKIHUB-545-35-EZ-K or Hub/Drum # AKHD-545-35-G-EZ-K which comes complete with bearings. These both have the 5 on 4-1/2" bolt pattern. If your trailer has a different...
view full answer... - Converting Hydraulic Drum Brakes to Electric Brakes on Tandem 3,500 Lb Axle Boat TrailerYes, plenty of people choose to use electric brakes on their boat trailer because of the lower maintenance and cost as compared to hydraulic brakes. To replace your current hydraulic brakes I recommend our Electric Trailer Brake Kit # AKEBRK-35-SA. This includes both the right hand and left hand brake assemblies, mounting bolts and adjuster plugs. If you are unable to reuse your old nuts and lock washers, those are sold separately as part # BRKH10B. Since you were checking out hub # Q-HUB84545,...
view full answer... - Brake & Drum Assembly For 2001 EZ Loader Boat TrailerThese brakes # AKFBBRK-35-D have 10" drums and 2-1/4 shoes. Of all the brake kits we sell of that size, they are all a 4 bolt mounting flange pattern. If your current axles have an inner bearing number of L68149 (1.378" inner diameter )and an outer bearing number L44649 (1.063" inner diameter), you can use # AKHD-545-35-G-EZ-K for your hub.
view full answer... - Timbren 3,500LB Axle-Less System With 4 of Lift, Hydraulic Trailer Brakes and Wheels/TiresWe have the Timbren Axle-Less Trailer Suspension System # ASR3500S06 which has a 4" lift spindle with brake flange and will allow you to have a 5 on 4-1/2" bolt pattern. For the brakes we have either the Disc Kit # KOD59FR if you are wanting hydraulic disc brakes. Or you will need the Drum Brakes # AKFBBRK-35-D with 2 of the Hub/Drum Assemblies # AKHD-545-35-G-EZ-K per axle. To get the weight rating you need for the tires you will want to step up to the Provider ST205/75R14 Radial Trailer...
view full answer... - How To Determine If Mobile Home Style Hubs Can Be Replaced With Standard Hubs on 16' Boat TrailerTo determine if you will be able to convert your mobile home style axles over to a standard bolt pattern you will need to measure your spindle. I have included a image below showing the measurement points you will need to find the diameter for using a Caliper # PTW80157. Once you have the measurements for your spindle let me know so I can confirm if you are able to replace your hubs or if you will need to have a new Spindle # TRU74FR welded to your axle for new Brakes # AKEBRK-35-SA and...
view full answer...
- Grease Seal for 3,500 Lb Axle With 2.325 Inch Outer DiameterI do have an option for you but it sounds like you have a very odd grease seal as the grease seal most commonly used with the L68149 and L44649 bearings is a 58846 which measures 1.719" inner diameter x 2.565" outer diameter. Unfortunately, we do not have any grease seals with a 1.719" inner diameter x 2.325" outer diameter so your best option is a new hub, the Trailer Hub Assembly part # AKIHUB-545-35-G-K or part # AKHD-545-35-G-EZ-K.
view full answer... - Replacement Hydraulic Brakes and Hub/Drum Assembly for 3,500 lb Boat Trailer AxleYour trailer axle is likely rated for 3,500 lbs which means you need the following parts: - Hydraulic Brake Kit - Uni-Servo - Free Backing # AKFBBRK-35-D - Easy Grease Trailer Hub/Drum Assembly # AKHD-545-35-G-EZ-K for 5 on 4-1/2" bolt pattern - Easy Grease Trailer Hub and Drum Assembly # AKHD-655-35-EZ-K for 6 on 5-1/2" bolt pattern The brake kit comes with both the left and right side assemblies but you'll need to get 2 of either hub and drum assembly as they only come as a single unit.
view full answer... - Replacement Hub and Drums and Brakes for EZ Loader Boat TrailerIf you are going to replace the axles and hubs then our hubs will come with the proper bearings. But in order to determine the correct bearings you would either need to replace the axles first and then tell me which axles you have so I can find hubs to match or if the axles are exactly the same as the old axles you could tell me the inner and outer bearing numbers stamped into the sides of the bearings. I checked the EZ loader site and did not see replacement axles as an option so I am...
view full answer... - Replacement Hub/Drum and Hydraulic Brake Assembly for Boat Trailer With 3,500 lb Axle and 13" WheelsThe # 8-247-50UC3-EZ and # AKHD-545-35-G-EZ-K will both fit and work with your 13" wheels. These are also compatible with the # 40716-15 from your previous question. For the most part it comes down to cost between the two hub/drum assemblies. However, since this will be going in the water on your boat trailer I would stick with the Dexter which has the 500-hour salt spray rating. The Hydraulic Brake Kit # AKFBBRK-35-D will work with your 13" wheels but I would stick with the Demco. The...
view full answer... - How to Determine Correct Timbren Axle-Less Suspension for Boat TrailerIn order to determine the correct capacity of the Timbren Axle-Less Suspension you need for your dual axle boat trailer you just need to know the GVWR of your trailer or the capacity of your current axles to get the appropriate system. For example, based on the numbers you gave it seems likely you have a pair of 3,500 axles so you will replace those with 3,500 lb rated axle-less suspension systems. For that you can use the Timbren Axle-Less Trailer Suspension System - Straight Spindle...
view full answer... - Hub Needed to Swap 3,500 lb Dexter Axle from 6 Lug to 5 on 4-1/2 inch Bolt PatternHey Brent, since your trailer has 3,500 lb axles all you need to convert from the 6 lug bolt pattern to the 5 on 4-1/2 inch bolt pattern is swap the hubs to the part # AKHD-545-35-G-EZ-K. This hub is also pre-greased so shes ready to slap on and go.
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Installed by:
Randy B
Video Edited:
Jacob T
Updated by:
Wilson B
Updated by:
Mike S
Written by:
Alexander C
Video by:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Laura E.
8/28/2017
Greg, with your current electric brake configuration, you have the option of purchasing brakes with e-coating, which fights rust and corrosion with a paint-like coating. But a downside to e-coating is that the paint can wear off or get chipped, allowing rust to start. If you would like to switch to hydraulic or disc brakes, there are many galvanized options available. For a great comparison of the choices available to you, see this link:
Helpful Links
https:/question-74311.html