What Replacement Hubs do I Need for My 3500 Pound Boat Trailer Axle?
Question:
I need help identifying replacement hubs to replace the old hubs on a boat trailer. The hubs are from UFP and have H-1377 on them and use inner bearing L68149 and outer bearing #L44649. The bolt pattern is a 5 bolt 4-1/2 spread.
asked by: Dan M
Expert Reply:
Thanks so much for providing those details! Based on your bearing numbers, you definitely have a 3.5k axle with a 5 on 4-1/2 lug pattern.
For replacement hubs, I recommend the Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized # AKHD-545-35-G-EZ-K (if you have E-Z Lube or Easy Grease spindles) or the Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized # AKHD-545-35-G-EZ-K (if you have standard spindles). Both of these kits come with bearings, races, grease seal, grease cap, and lug nuts. They are also galvanized to provide you with extra protection from water.
If you do not have brakes on your trailer, we also sell the idler hub versions as # AKIHUB-545-35-G-EZ-K (if you have E-Z Lube or Easy Grease spindles) and # AKIHUB-545-35-G-K (for standard spindles).
Products Referenced in This Question
Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Video: etrailer Hub And Drum Assembly Installation
- Shop: Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-G-EZ-K Review
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet and Stainless Steel - 3,500 lbs
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Q&A: Recommended Galvanized Trailer Idler Hub for Trailer with 3,500 Lb Axle
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Recommended Replacement Hub/Drum and Brake Assembly for Typical Dexter 3500 lb Axle
- Q&A: Correct Replacement Hubs/Drums and Brakes for a Dexter 4,000 Lb Axle
- Q&A: Can Oil Bath Hubs be Converted to Grease Hubs
- Q&A: Comparing Dexter and etrailer Branded Electric Trailer Brake Assemblies
- Search Results: bearing grease packer
- Search Results: boat trailer brakes
- Search Results: trailer brake kit
- Search Results: electric boat trailer brakes
- Search Results: marine
- Search Results: hd1377
- Search Results: oil bath hub
- Q&A: How to Identify Hubs on 2005 Ranger Trailer for Rotor Replacement
- Q&A: Will the Additional Width from Slip-Over Rotors Affect the Fit of the Brake Calipers on a Trailer
- Video: etrailer Trailer Idler Hub Assembly Installation
- Video: etrailer Trailer Hub and Drum Assembly Review and Installation AKHD-545-35-G-EZ-K
- Video: etrailer Trailer Bearings Races Seals Caps - Races - L68111 Review
- Article: Most Popular Wheel Bearings
- Video: TruRyde Trailer Bearings Races Seals Caps - Seals - RG06-090 Review
- Video: CE Smith Trailer Hubs and Drums - Hub - CE13210 Review