Dexter Trailer Hub and Drum for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized

Dexter Trailer Hubs and Drums - 8-247-50

Install this hub-and-drum on your trailer. Hub fits 3,500-lb axles with #84 spindles. Galvanized finish is great for marine use. Inner and outer races included. Bearings, grease seal, grease cap, and lug nuts sold separately.

Features:

• Marine-grade trailer hub-and-drum provides surface area for brake shoes to grip when brake is activated
  • Compatible with electric and hydraulic drum brakes
• Zinc plating has a 500-hour salt spray rating
  • Ideal for use on a boat or snowmobile trailer
  • Durable enough for saltwater applications
• Sturdy iron construction
• Inner and outer races included
  • Bearings, grease seal, grease cap, wheel bolts, and lug nuts sold separately
• Made in the USA

Specs:

• Application: 3,500-lb axles with #84 spindles
• Drum dimensions: 10" diameter x 2-1/4" wide
  • Works with 10" x 2-1/4" brake assembly
• Bolt pattern: 5 on 4-1/2"
• Wheel studs: 1/2" diameter x 2-1/4" long
• Weight capacity: 1,750 lbs

Bearing, Race, and Seal Information

• Bearings (sold separately)
  • Inner bearing: L68149 (1.378" inner diameter)
  • Outer bearing: L44649 (1.063" inner diameter)
• Races (included)
  • Inner race: L68111
  • Outer race: L44610
• Grease seal (sold separately): 58846
  • Inner diameter: 1.719"
  • Outer diameter: 2.565"

Corrosion Resistance for Marine Use

This trailer hub-and-drum assembly has a zinc coating that resists corrosion, making it ideal for use on your boat or snowmobile trailer. All GAL-DEX hubs and drums undergo a test in which they are sprayed with a 5-percent salt solution to determine corrosion resistance over time. These products are able to withstand 500 hours of constant exposure to the saltwater mist. This 500-hour salt spray rating indicates that a product is not only durable enough to last in freshwater environments, but it can also be used on trailers that come into contact with saltwater.

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

• If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
• If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
• If D = 3", then the bolt pattern is 5 on 5"
• If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"

008-247-50 Dexter 10" Hub and Drum with Races for 3.5K Axle - 5 on 4-1/2 - GAL-DEX