Replacement Hub and Drums and Brakes for EZ Loader Boat Trailer
Question:
Thanks for your help on this project. I have inspected the axles and don't need to replace them. I would like to replace the Hubs, races, bearings, and brake assemblies. The bearings are: Bearing Kit for #84 Spindle, L44649/L68149. This is for a boat trailer used in salt water so I want all galvanized parts. Can you help me identify the correct set of parts?
asked by: Brian C
Expert Reply:
If you are going to replace the axles and hubs then our hubs will come with the proper bearings. But in order to determine the correct bearings you would either need to replace the axles first and then tell me which axles you have so I can find hubs to match or if the axles are exactly the same as the old axles you could tell me the inner and outer bearing numbers stamped into the sides of the bearings.
I checked the EZ loader site and did not see replacement axles as an option so I am sort of in limbo. To be completely honest with you I believe you will have the best luck going directly through EZ Loader. It seems like more than half of the time they can't or won't give part numbers to us even when we have a VIN.
Products Referenced in This Question
Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
- Trailer Brakes
- Hydraulic Drum Brakes
- Marine Grade
- Free Backing
- Manual Adjust
- Single Servo
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 1800 lbs
- 5 on 4-1/2 Inch
- 46-1/2 Inch Long
- 57-1/2 Inch Long
- No Drop or Lift
- CE Smith
more information >
Continue Researching
- Shop: Demco Trailer Coupler - Adjustable Channel Mount - eZ-Latch - Silver - 2" Ball - 10,000 lbs
- Shop: Roadmaster Hy-Power Diode - (Qty 1)
- Q&A: Diode to Prevent Back Feeding from Trailer Battery to Running Lights
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Q&A: Solution for Replacement Hubs on Northern Tool Ultra-Tow 49803 Aluminum Trailer
- Q&A: Available Galvanized Axles For Boat Trailer
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: What Information is Needed to Replace Trailer Axle
- Q&A: Axle Tube Diameter and Spring Seat Dimensions of etrailer Brand e84YR 2000 lb Capacity Axle
- Article: Where to Position the Trailer Axle?
- Q&A: Axle Upgrade for my Harbor Freight 1720 Utility Trailer
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Slipper Spring Trailer Suspension System Review
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
310042
7/30/2018
Thanks for your help on this project. I have inspected the axles and don't need to replace them. I would like to replace the Hubs, races, bearings, and brake assemblies. The bearings are: Bearing Kit for #84 Spindle, L44649/L68149. This is for a boat trailer used in salt water so I want all galvanized parts. Can you help me identify the correct set of parts?