Spindles and Hubs To Update 1972 Sanger Boat Trailer To Currently Used Sized Bearings
Question:
I’m looking to purchase 4 wheel bearing kits for a 1972 Sanger Boat trailer: Inside Bearing: I.D: 1.33" O.D. 2.12" Depth .65" Seal : 2.35 O.D 1.72 I.D. Outer Bearing: I.D. .82" O.D 1.59" Depth .65" These are the old Timken numbers I have: Inner: 168149 PT2814 Outer: LM12749097 or LM1Z749097 , the numbers are really faded. Thank you
asked by: Walt R
Expert Reply:
You are going to want to update the spindles on your 1972 Sanger boat trailer to the more common Spindle # TRU74FR. This will give you the current common bearing sizes for a typical 3,500lb axle as we do not carry either of your bearing sizes. You will need to pair the new spindles with new hubs. We have either an Idler Hub # AKIHUB-545-35-EZ-K or Hub/Drum # AKHD-545-35-G-EZ-K which comes complete with bearings. These both have the 5 on 4-1/2" bolt pattern. If your trailer has a different bolt pattern please let me know and I can help you find the best hubs for your application.
Products Referenced in This Question
Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Q&A: Which is Better an EZ Lube Spindle or a Bearing Buddy Setup
- Q&A: Replacement Zerk Fitting Recommendation for Dexter EZ Lube Spindle
- Q&A: Replacement 1250 Key For Rear Door on Truck Utility Body
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Flange Bolt Pattern and Distance From Flange To Rear Of #84 E-Z Lube Spindle TRU74FR
- Q&A: Replacement Hub and Drum Assemblies for AL/KO 8460 Hubs and Drums
- Q&A: Brake Bolt Pattern and Stub Diameter for #84 E-Z Lube Spindle for 3,500 lb Trailer Axles
- Article: Trailer Maintenance Schedule
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Replacement Hub and Spindle for TDE 11033 Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer