Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet - 10" - Left/Right Hand Assemblies - 3.5K
(208 reviews)
Price: $180.76
In Stock
Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet - 10" - Left/Right Hand Assemblies - 3.5K
Item # AKUBRK-35-D
Our Price: $180.76
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (208)
- Q & A (0)
- Photos
etrailer by AxleTek Trailer Brakes - AKUBRK-35-D
- Hydraulic Drum Brakes
- 3500 lbs Axle
- 10 x 2-1/4 Inch Drum
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Marine Grade
- Manual Adjust
- Single Servo
- etrailer
Marine-grade, driver's-side and passenger's-side hydraulic drum brakes have single plungers. Automotive-grade friction pads are long-lasting. Dacromet-coated backing plates are extremely corrosion resistant. Fit 14" to 15" wheels.
Features:
- Marine-grade hydraulic drum brake assemblies are great for boat trailers
- Designed for use with surge-type trailer brake actuators
- Automotive-grade friction material is molded to brake shoes
- Pads are fully bonded - not riveted - to shoes for long life and more braking torque
- Less chance of cracking and crumbling that can lead to mechanical lockup, thanks to tapered edge and circular grinding
- Periodic manual adjustment required
- Fine-tooth brake adjustment gears allow for a more precise setting
- Dacromet coating on backing plates offers superior corrosion resistance
- Ideal for use on a boat or snowmobile trailer
- Durable enough for saltwater applications
- Stainless steel springs are durable and rustproof
- Aluminum hydraulic cylinders resist rust
- Single plunger design
- Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes
- Left-hand (driver's-side) brake assembly, right-hand (passenger's-side) brake assembly, and mounting bolts included
- Nuts and lock washers (BRKH10B) sold separately
- QAI and CSA certified
Specs:
- Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO
- Dimensions: 10" diameter x 2-1/4" wide
- Mounting flange bolt pattern: 4 bolt
- Distance between mounting flange bolt holes (center to center): 2-7/8"
- Wheel size: 14" and 15"
- Axle rating: 3,500 lbs
- 1-Year limited warranty
These trailer brake assemblies act as part of your trailer's hydraulic braking system. A hydraulic trailer brake actuator is required for these brakes to function.
Thoroughly Tested for Safety
These brake assemblies meet the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. These brake assemblies underwent extensive testing to measure stopping distances when braking. These brakes have also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.
Automotive-Grade Friction Material
Each shoe on these brake assemblies is lined with automotive-grade friction material for improved stopping performance and longevity. The friction material is fully bonded onto the surface of the brake shoe. This lining is custom-molded for a perfect fit. The edges are tapered to ensure long-lasting performance. This taper, along with the circular grinding that the lining undergoes, helps to prevent cracking and crumbling. This durability helps to prevent mechanical lockup, which can occur when brake shoes are excessively worn or broken.
The friction material is also SAE-N certified, which means that it is an environmentally safe product that complies with California and Washington regulations regarding the composition of brake pads. As a result, this material not only provides high-performance braking that can endure the test of time, but it is also environmentally friendly and safe for use throughout the United States and Canada.
B10H-63 AxleTek 10" X 2-1/4" LH Hydraulic Brake Assembly - Drivers Side - 3.5K Axles - Dacromet Coat
B10H-64 AxleTek 10" X 2-1/4" RH Hydraulic Brake Assembly - Passengers Side - 3.5K Axles - Dacromet Coat
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet - 10" - Left/Right Hand Assemblies - 3.5K - AKUBRK-35-D
Average Customer Rating: 4.6 out of 5 stars (208 Customer Reviews)
Marine-grade, driver's-side and passenger's-side hydraulic drum brakes have single plungers. Automotive-grade friction pads are long-lasting. Dacromet-coated backing plates are extremely corrosion resistant. Fit 14" to 15" wheels.by: Chuck 11/04/2022
Great bolt up for all components. In and out of ramp on the Oregon coast for three weeks and have rust on springs and connecting components. Backing plates are good but hardware seems a little week with rust problems.
by: Steve06/25/2021
When I looked on the website, this item was listed only for 14, 14 1/2, and 15 inch wheels.
I talked to order desk, no help. I have 13 inch wheels. I took a chance and ordered. These fit my 10 x 2 1/4 drums perfectly. Nice anti-corrosive finish. My previous brakes installed with 7/16-14 bolts, these came with 7/16-20 pressed in studs. It would have been nice to include nuts and lock washers to ease installation.
by: David10/27/2023
Excellent service parts worked perfectly trailer stops on a dime now confident to take it anywhere. Nick and the crew know their stuff will call each trailer every time working on trailers for parts.
by: Greg V12/22/2023
These worked great, the first shipment was missing a part but etrailer fixed the issue and upgraded. quick shipping great communication and follow-up. They will always be my first choice for parts.
by: Kellen04/21/2024
Bolted right up to replace old rusted out brakes. Shipping was on time.
by: John J.01/11/2019
Ordered complete brake kits for a tandem boat trailer. Order received within 48 hours of placing the order on line. All parts present and exactly as described. Parts fit perfectly.
Job completed within 4 hours.
by: Jim 09/14/2023
I had to replace the brakes on my trailer due to the old brake assemblies wanted to freeze up after any use. Etrailer had the best price and quickest delivery than most of the other suppliers. Quick delivery and good prices can't beat the service!
by: Don08/10/2023
Worst service ever, ruined vacation! Order was short two backing plate assembly’s. The ones I got had no nuts or lock washers. No indication that you would have to provide your own fasteners, I would have paid extra had I known, that would save a trip to hardware store. Or just simply state that you don’t provide fasteners for installation and give size. My shortages could have been overnighted? Last time I ever use etrailer. I am blogging on every platform available about my experience.
by: Josh04/14/2020
Customer service was very helpful getting me the right parts. Thanks!
by: Jim 07/03/2023
Perfect fit. Easy to install. Only minor issue was the bleeder valve rubber cover was stuck on and ripped when removing so had to use one from old brake assemblies.
by: Austin m05/14/2022
I am giving the parts a 4 star rating because they didn't come with the 7/16-20 nuts needed to install them mine were rotted so I couldn't reuse them and a 7/16-20 is a really hard size to find. Otherwise the assembly fits fine and looks good,and good quality. Now the shipping was a diffent story I would give the shipping 3 stars their kitting process needs improvement. I ordered them April 28th they didn't kit them and ship them until may 11th even with them listed as in stock some kitting improvment is needed. So make sure you are not in a hurry to receive this kitted item. Allow about a month for delivery.
by: Richard 09/02/2023
High quality product, perfect fit on a 1990 boat trailer. And next day delivery !
by: Michael3304/16/2017
Excellent fit! Easy to install and kit came with everything you need! I replaced my old worn out brakes. Trailer stops perfect now! Thanks etrailer.
by: Mitch09/13/2020
This is an exact fit to the discontinued brake system that I had. It was easy to install and it looks like very good quality. I have no problem recommending this to anyone that is in need to replace their brakes or building there own trailer.
Mitch
9/14/2021
The brake system a year later still works like the day i installed it. Ive never had to add fluid or adjust them. Very happy with the system.
by: Jeffrey 08/25/2023
Made a call to E trailer and all my questions were answered in a quick minute. I trust when I call you always have answers. Thank you all for your work etic.
by: Dean 05/22/2023
Better than perfect. Did have an issue with getting Parts at first but I was more than compensated for my slight dissatisfaction. This is the only place I'm getting trailer parts from now on.
by: Michael 08/05/2022
i wish it was made anewhere but china. fast service.
Michael S.
8/6/2023
all good
by: Brandon08/04/2023
I ordered the kit and only the RH showed up. I had a scheduled appointment to have them installed that I missed.
by: Joe B.01/13/2019
I needed new brakes for my boat trailer. After searching several suppliers for quality and pricing I found etrailer to have both qualities. I used these backing plates and their complete braking system including drums and brake lines to bring new life to my trailer. I am very satisfied and safe on the road again. Etrailer is my frist choice for trailer parts.
Joe B.
1/14/2020
My new Etrailer braking system has been worki g flawlessly since installed
by: Forrest09/04/2020
Got the new brakes you guys are great only took a couple day to get them will be back on the water soon.
Forrest
9/5/2021
Still working great would buy them again.
by: Marvin10/15/2022
Missing half the adjuster for the left brake. I used etrailer instead of [online vendor] because I thought I would get a better product and the correct parts without issues. Not the case.
Brooke M.
10/29/2022
Thanks for bringing this to our attention. We definitely want to make sure you get taken care of. I have sent your information to our customer service team and they will be reaching out to you.
by: Peter10/07/2021
Missing the hole for water rinse tubing, missing the 4 - 7/16 x20 fine locking nuts, studs are to short to add a lock washer, one of two brake cylinders had a poorly tapped out brake line hole, had to buy a tap to salvage it. Not a bargain, cheap China junk, should have purchased locally thru trailer dealer offering American made. Amazes that etrailer does not at least advise you of such, usually pleased w/ etrailer, not so much now.
Sierra K.
10/15/2021
I am sorry that you are not pleased with your items. I did want to mention that the nuts and lock washers Item # BRKH10B are sold separately but the adjuster plugs included, cover access holes to keep dirt and grime out of the assemblies and off of the shoes.
Helpful Links
by: Robert 01/31/2021
Installation and adjustment was straight forward, mounting bolts lined up perfectly as did brake lines. Brass bleed screws sealed well, and I now have functional brakes on my boat trailer again.
Robert
2/1/2022
After a year of trailering our boat, these brakes are performing great. With todays traffic, I enjoy reliable trailer brakes more than ever. No noise, grabbing or other issues. Good product!
by: William W.03/14/2017
Order shipped promptly and arrived on time and in good condition. Installation was easy. Resolved issues with wheel cylinders and brake shoes with quick 4 bolt installation.
William W.
3/15/2018
Product continues to perform as expected. Very pleased.
by: Alan05/21/2022
Your customer service girls were nice but your warehouse must be a total disaster in stock items took 17 days to ship TOTALLY UNACCEPTABLE probably will never order from you again
25
189
Show More Reviews
See what our Experts say about this etrailer Trailer Brakes
- Comparing Dacromet Hydraulic Trailer Brake Assemblies for 10 Inch HubsThe Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs # AKFBBRK-35-D and the Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet - 10" - Left/Right Hand Assemblies - 3.5K # AKUBRK-35-D are similar. The difference is the # AKUBRK-35-D is not a free-backing assembly meaning you will still have about 20% braking when in reverse without a reverse lockout solenoid or manual lockout. The # AKFBBRK-35-D is "free backing" meaning it will not apply the...
view full answer... - Which Brakes to Fit in Dexter 8-247 Hub and DrumsYes. The Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet - 10" - Left/Right Hand Assemblies - 3.5K # AKUBRK-35-D are compatible with the Dexter Trailer Hub and Drum for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized # 8-247-50. The brakes come with mounting bolts but not the hardware, so if you need brake mounting hardware (nuts and lock washers) you can use the # BRKH10B.
view full answer... - Replacement Hydraulic Drum Brake System for a Single Axle Magic Tilt Boat Trailer Yes, you have done your research well. These parts will fit together and allow you to back up without needing anything else. I can confirm that Demco Hydraulic Brake Actuator item # DM8609101 will work with the Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet - 10" - Left/Right Hand Assemblies - 3.5K item # AKUBRK-35-D. These brake assemblies are compatible with the Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized item # AKHD-545-35-G-EZ-K....
view full answer... - Brake Assemblies For 3,500Lb Surge Brakes That Allow For Backing Up Without a Reverse LockoutYes, The Dexter Trailer Hub and Drum Assembly # 84546UC3-EZ will work with brakes that do not have a reverse lockout but do know that the hubs have no control over the brake activation on your trailer. You need the brake assembly for that. The Hydraulic Trailer Brake Kit # AKUBRK-35 or Hydraulic Trailer Brake Kit # AKUBRK-35-D (for boat trailers) will allow for the brakes to activate when backing up if you do not have a reverse lockout on your brake actuator. The Hydraulic Trailer...
view full answer... - How To Determine Which Replacement Brakes Will Fit A Karavan Boat TrailerFrom what I could find out, you do indeed have a Karavan boat trailer. Unfortunately, this was all I could confirm with the US-2800-SB-74-ST-GL number. With that being said, there will be two ways to proceed to figure out which replacements will be correct for your trailer. First, and the easiest way, will be to contact Karavan with your VIN. They should be able to tell you exactly what size, brand, style, and capacity brakes were used on your trailer. If for some reason they cannot, you...
view full answer... - Difference Between 3,500 lb 10-Inch Hydraulic Trailer Brakes for Boat TrailerThere is a difference between the two 3,500 lb 10-inch hydraulic brake assemblies you referenced, which is that one has a dacromet coating for better resistance to corrosion. Dacromet is an adhesive coating that gives added protection against corrosion so they are optimal for a boat trailer. - Dacromet Coating: Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet # AKUBRK-35-D - Non-Dacromet: Hydraulic Trailer Brake Kit - Uni-Servo # AKUBRK-35 These are otherwise the same hydraulic brakes...
view full answer... - Replacement Hydraulic Drum Brakes for Trailer with 10-Inch Hub/DrumsThank you for the photo of your trailer hub/drum assembly which shows its diameter to be 10-inches. More than likely the drum depth dimension is 2-1/4-inches since 10 x 2-1/4-inch hubs are quite popular. Please refer to the photo I linked for you. Our range of hydraulic drum brake assemblies in this size is linked for you. These work for axle weight ratings of either 3500-lbs or 3750-lbs and they are compatible with wheel diameters from 13- to 15-inches. An example is single-servo brake...
view full answer...
- Which Direction Should Star Wheel of Brake Assembly Move to Tighten BrakesThe adjustment star on brake assemblies like the # AKUBRK-35-D needs to turn counter-clockwise to expand the shoes so you'd need to click the star "up" to tighten the brakes or "down" to loosen them as you'd view them from the back of the assemblies. You will adjust the brakes using that wheel until there is a slight but constant drag of the shoe pads on the drum. I have included a link to a video and at about the 4:39 mark our installed begins adjusting the brakes.
view full answer... - Replacement Drum or Disc Brake Components for 3,500 lb Trailer AxleIf you can verify that you have 3,500 lb trailer axles then yes the parts you mentioned would be correct for you. The brake assemblies # AKUBRK-35-D are correct, the hardware kit part # BRKH10B would attach them to your spindles, and then for a hub/drum you'd need the # 8-247-50UC3 and you'd be set. Do go to a disc brake setup you would also be needing to replace the actuator/coupler that you have now as it would require a higher PSI rating. The kit you'd want for just the brake components...
view full answer... - Do Brake Shoes Need to be Replaced if Grease Spilled on ThemI empathize with you because accidents do happen but if grease got on the brake shoes of your Hydraulic Trailer Brake Kit # AKUBRK-35-D to be safe you need to replace the shoes in order to ensure proper braking. For that you will need two of the Hydraulic Brake Shoe/Lining # BP04-120; this shoe will fit single servo 10" diameter x 2-1/4" wide shoes like your kit has.
view full answer... - Replacement Brake Assemblies for 1994 Shoreliner Trailer with Hydraulic Drum BrakesWe can help but we don't have wheel cylinders for the brake assemblies you have. Best solution would be all new assemblies like the part # AKUBRK-35-D which are 10 inch assemblies for a 3,500 lb axle. If you had a 5k axles the assemblies would be 12 inch.
view full answer... - Hydraulic Brake Line for Hydraulic Drum Brake Assembly # AKUBRK-35-DThe Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet - 10" - Left/Right Hand Assemblies - 3.5K # AKUBRK-35-D will fit the traditional 3/16 inch brake lines like # 18SI-BLKIT or # 20TA-BLKIT which have the thread size of 3/8"-24. You shouldn't need an adapter fitting unless you have the larger 1/4 inch brake lines. In that case the Replacement Adapter Fitting for Titan Hydraulic Brake Kits - 1/4" to 3/16" # T4871700 would be used.
view full answer...
- Fit of Kodiak 20TA-BLKIT Brake Line Kit with Hydraulic Drum Brake AssembliesThe # 20TA-BLKIT brake line kit you referenced is indeed compatible with the # AKUBRK-35-D Hydraulic Brake assemblies you'd looked at, the line kit is compatible with bolt disc and drum brake systems. The brake assemblies will be compatible with your existing axles, assuming the brake mounting flanges have the 2-7/8 inch center to center bolt hole spacing. I've linked to videos featuring the line kit and the brake assemblies you'd looked at.
view full answer...
- Correct 3,500 lb Hub & Drum For Boat Trailer With Bearings L44649 & L68149Outstanding information, thanks so much, and what you have, based on those measurements are a spindle for a 3,500 lb axle, with outer bearing L44649 and inner bearing L68149. For that, what you need is the following hub and drum: - Trailer Hub and Drum Assembly # AKHD-545-35-G-K This is a galvanized hub for your boat trailer, has a 5 on 4-1/2" wheel bolt pattern, and will allow you to use 3,500 lb brakes. Your brake flange bolt holes are the standard size so you can use the Hydraulic...
view full answer... - Recommended Replacement Surge Coupler for ATWOOD 82541 and Brake AssembliesThe Atwood 82541 you referenced was discontinued a while back. The replacement I recommend is the Brake Actuator with Manual Lockout - Bolt On - Drum - 2" Ball - 7,500 lbs # T63FR. Then for your EZLoader drum brakes I recommend the Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet # AKUBRK-35-D if you have 10 inch drums or the Hydraulic Brake Kit - Uni-Servo - Free Backing # AKFBBRK-7 for 12 inch drums.
view full answer... - Replacement Brake Actuator and Braking Assemblies for a Trail-Rite TrailerThanks for the photo! In order to replace the surge brake actuator, I recommend taking a look at the Titan Zinc-Plated Brake Actuator part # T43397007K. This actuator is zinc plated for corrosion resistance, will work with 1-7/8"/ 2" hitch balls, and can utilize an electric lockout like # T4748800 for easy reversing. It will fit a 3" wide tongue and comes with a one year warranty. I have attached a review video for you as well. Unfortunately, we would not have the correct brake cylinder...
view full answer...
- Hydraulic Brake Kit Parts to Fit 3,500 lb Trailer AxleThe parts that you mentioned will work together: Titan Zinc-Plated Brake Actuator - # T43397007K Hydraulic Trailer Brake Kit - # AKUBRK-35-D Trailer Hub and Drum Assembly - # AKHD-545-35-K Titan Hydraulic Brake Lines with Fittings # T0776500 If you have torsion axles then the brake line kit will work great, otherwise I recommend going with a brake line kit like part # 18SI-BLKIT or # HS496-252 which are designed for standard trailer axles.
view full answer... - How to Prep Brake Drums for Use with New Braking AssembliesThe best way to prep your new drums would be to take them to a local shop and have them resurfaced. Although there may not be any visible pitting they could still be warped which could create more issues further down the road. You also need to make sure there is enough life left in the material which they will tell you before the resurfacing process. If you choose not to have them resurfaced then I recommend taking a bit of fine grit sandpaper and removing any surface rust off the top layer...
view full answer... - Troubleshooting Weak Trailer Brakes When Using Foot Pedal But Great Breaking with Manual OverrideIt sounds like you have a proportional brake controller, like the Prodigy P3 # 90195, that activates the brakes on your trailer at the same time and with the same intensity as the brake pedal in your tow vehicle. What I think is going on is that you aren't adjusting the power output of the brake controller before heading down the road. The manual override will always provide the 12V of power but if you have the power output setting low on your brake controller (like a 5 or 6) then it will...
view full answer... - Compatibility between UFP HD1377 Drum/Hub and AKUBRK-35-D Trailer Brake AssemblyThe UFP HD377 is a 10 inch hub drum for a typical 3.5K axle. The # AKUBRK-35-D brake assembly you'd looked at is compatible with a 10 x 2-1/4 inch hub drum, as long a the inside width and depth dimensions of your existing hub match that, the assembly would work perfectly for you. I'd make sure that the inside surface of the existing hub/drum where the brake pads would contact are in good condition. If not, the proper replacement hub/drum is part # AKHD-545-35-K
view full answer...
- Width of 3,500 lb Hydraulic Trailer Brakes AKUBRK-35-DI could not find where it said "2-1/4 inch drums" though what I can tell you is the width of the shoes is 2-1/4 inches on the 3,500 lb hydraulic brakes: - Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet - 10" - Left/Right Hand Assemblies # AKUBRK-35-D This kit includes the Right Hand # AKFBBRK-35R-D and Left Hand # AKFBBRK-35L-D brakes, and to install requires Mounting Hardware for 10" Brake Assemblies # BRKH10B.
view full answer... - Distance Between Mounting Flange Bolt Holes on Hydraulic Trailer Brake KitThe Hydraulic Trailer Brake Kit # AKUBRK-35-D has a 4-bolt mounting flange bolt pattern and the mounting flange bolts are measured 2-7/8 inches center to center. This kit includes both the left and right brake assemblies, measure 10" diameter x 2-1/4" wide, work with a 3,500 lb axle, and have dacromet-coated backing plates which make them highly resistant to any type of corrosion. These brakes do require the use of Mounting Hardware for 10" Brake Assemblies # BRKH10B to install. I have...
view full answer... - Replacement Brake Assemblies for 1987 VM Boat TrailerSince you need 10 inch by 2-1/4 inch hydraulic brake assemblies that have a 4 bolt pattern that is 2-7/8 inches the drum brake kit part # AKUBRK-35-D would be what you'd need. The bolt pattern you mentioned is the standard 4 bolt pattern.
view full answer... - Determining Which Hubs and Drums Fit 2002 Jayco Heritage Laurel Pop-Up Camper W/ 2900lb AxleI would be happy to help you determine which replacement hub assembly will fit your 2002 Jayco Heritage Laurel Pop Up Camper, but the Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet - 10" - Left/Right Hand Assemblies - 3.5K # AKUBRK-35-D you were looking at are a brake assembly. For compatible hubs you will more than likely need the Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3-EZ. The reason I say likely is there is not a specific...
view full answer...
Do you have a question about this Trailer Brake?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Edited by:
Lindsey S
Installed by:
Cole B
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Hannah L
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Chuck
12/22/2023
Breaks are working fine although rust is forming on the springs and connecting items.Backing plates and cylinder are mostly rust free. But very easy to install and were ready to go. Using on a boat trailer