Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
(112 reviews)
Price: $110.30
In Stock
Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
Item # AKHD-550-35-EZ-K
Our Price: $110.30
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (112)
- Q & A (0)
- Photos
etrailer by AxleTek Trailer Hubs and Drums - AKHD-550-35-EZ-K
- 5 on 5 Inch
- For 3500 lbs Axles
- Hub with Integrated Drum
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Easy Grease
- EZ Lube
- Pre-Greased
- 1/2 Inch Stud
- L44649
- L68149
- etrailer
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.
Features:
- Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
- Compatible with electric and hydraulic drum brakes
- Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy
- Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
- Sturdy iron construction
- Zinc-enriched paint on drum adds durability
- Zinc-finished bolts resist corrosion
- Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings
- Lithium complex, multipurpose grease keeps bearings lubricated
- Bearings, races, grease seal, grease cap, and lug nuts are included
- QAI and CSA certified
Specs:
- Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles
- Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
- Actual drum dimensions: 10-15/16" diameter x 2-5/8" wide
- Works with 10" brake assembly
- Bolt pattern: 5 on 5"
- Wheel studs: 1/2" diameter x 1-1/4" long
- Grease cap flange diameter: 1.99"
- Weight capacity: 1,750 lbs
- Limited 1-year warranty
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: L68149 (1.378" inner diameter)
- Outer bearing: L44649 (1.063" inner diameter)
- Races (included)
- Inner race: L68111
- Outer race: L44610
- Grease seal (included): 58846
- Inner diameter: 1.719"
- Outer diameter: 2.565"
Thoroughly Tested for Safety
This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. This assembly underwent extensive testing to measure stopping distances when braking. This assembly has also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.
E-Z Lube and Easy Grease-Compatible Assembly for Simple Lubrication
The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
KBD2-550-19 AxleTek 10" Trailer Hub and Drum Assembly for 3.5K Axle with Hardware - 5 on 5 - EZ Lube - Pre Greased
Compare to Dexter 84556UC3-EZ
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Arrived Damaged
Customer Reviews
Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased - AKHD-550-35-EZ-K
Average Customer Rating: 4.7 out of 5 stars (112 Customer Reviews)
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.
by: Nick H.08/12/2022
They made for an easy install on a tandem trailer, whose idler axle I upgraded with brakes, once I had the proper size (5 on 5). The first set were mislabeled & contained the wrong size (5 on 4.75). etrailer promptly sent proper replacements and a call tag for the improper ones.
by: Russell P.08/12/2016
Converted Carson trailer front idler axle to electric brakes. Parts fit excellent.
Customer service was superb even when I ordered wrong part.(my fault) The return of wrong part was handled very professional. Very happy with Etrailer parts quality and employees.
by: Ronnie W12/05/2016
Thanks George for the service, the 10 inch hub-drum and the 7 pin plug made the trailer rebuild much better. Your company is by far the best I have ever dealt with, I can't say enough about the fast shipping and the quality of your products. I will be ordering more hud- drums for another trailer soon,again thanks.
by: Douglas05/25/2023
I ordered the wrong parts from another vendor without even knowing it. Once I found my mistake I called the fine people at etrailer and explained what I had done. They walked me through a few steps and had exactly what I needed. Thank you very much.
by: Maxfrancis12/03/2019
These were great and came with bearings, dust seals, and new lugz. My old ones seemed a little warped. Nice paint on the outside, time will tell if it stands up to snow and salt.
by: Lionel10/06/2022
The drum fit perfectly but the package was kind of banged up.
by: Jeff04/24/2022
Exact replacement of OEM hubs
Jeff
4/25/2023
The hubs fit right the first time and have worked flawlessly.
by: Matthew 06/15/2019
No problem with them thus far. Straightforward install with the bearings, races, and drums.
by: Tyler03/25/2023
Awesome communication, quality parts, my go to for everything trailer related. I recently ordered a few small axle parts from Amazon and was sorely disappointed, etrailer quality is night and day difference.
by: Mike & Brandon11/25/2022
Outstanding customer service with Jesse M. My son and I placed a order for a complete axle with drums and electric breaks for a 3500 lbs rated 5 lug wheel, it was delivered the next day. We took it to our farm 150 miles from home to do the repair every thing went fine till we go to the drums wrong size. They were 5-4 1/2 and we didn’t no there is three.various sizes called Jesse and he told us how over the phone how to measure drum problem is we had tape measure and wasn’t sure of the exact measurements. Got the next size drum 5X4 3/4 guess what didn’t fit ether and another call to Jesse who sent us an email with a printable wheel drum template cut it out and solved our problem this time we brought the wheel and drum with us home and used the template fit like a glove 5X5. Jesse sent returned authorization form sent both sets drums back through UPS of credit to my account and Jesse waved the last return shipping charge. It doesn’t get any better than that folks and as soon as we head back to farm to install I’m going to call Jesse to thank him again. Thanks
by: Harold06/10/2020
Actually ordered the wrong bolt pattern but was pleasantly surprised by etrailer’s assistance regarding the return of the wrong hub/drum assemblies as well as the purchase of the correct ones. Great Customer Assistance!
These pregreased hub & drum assemblies are a great product making replacing these parts a breeze! Comes with pregreased bearings and seals in place ready to be installed. Couldn’t be easier!
Thanks etrailer!
Harold
6/10/2021
1 year later and still working Great!
by: Brian03/16/2020
Product came fast. Everything that came with it was exactly as stated and fit perfectly. Thanks again to Derek for all his help and tech support.
by: Ken L.01/18/2020
Installed four sets of these hubs and drums, along with new electric brakes, as part of a total trailer refurb a year ago. Had some challenges early on with one wheel overheating, but solved it with the help of etrailer's excellent tech support. Since then everything is fine and I couldn't be happier.
Ken L.
1/19/2021
Initially I had some issues with one of the drums getting very hot when driving. So, I contacted customer service, and with their help I was able to rectify the situation. Since then everything is working just fine. Thanks for being a first-class organization who cares about the customer.
by: Steve B09/05/2022
Everything arrived in great shape. All the parts ordered worked fantastic. Spent a Saturday getting trailer rebuilt and back on the road-new axel-brakes-drums. Everyone at e-trailer were very helpful
by: Waldemar01/25/2023
It was a fairly easy installation. I've used the trailer a few times and it seems to be working perfectly.
by: Corey M.07/23/2019
My original purchase was for a new weld on spindle with new drum/hub assembly with bearings for the other 3 wheels. I measured the wheel pattern wrong and by the time I had realized this I had installed everything. I reached out to etrailer for help and thanks to Hally C. she was able to remedy my issue with the right parts in about two days with little trouble at all. Thank you to etrailer for technical assistance and speedy delivery of new parts. Advice to anyone ordering hubs and drums remember the old saying about carpentry, measure twice and cut once, (in this case measure twice and order once) or you'll be like me and now own a hub/drum that's sitting on your shelf collecting dust because you don't own anything it fits (yet lol)!
by: Ron R.10/27/2020
The hub and drum assemblies fit well and there was no damage so everything went together nicely. What I have come to expect from etrailer.com!
Ron R.
10/27/2021
They arrived when promised undamaged and ready to install. Have used them a lot and have had no problems. Very pleased!
by: Frank strivklin08/24/2017
I got the wrong size brake drums because I measured improperly but other than that everything was fine. I added brakes to a trailer that had none. . I had to re-order the right size and now my trailers on the road. My recommendation is to take your wheels down to your local tire dealer and have them measure the lug diameter with their gauge before you order.
by: CNico09/24/2019
The unit came well packed originally and was easy to install. Have used 22' tandem axle to haul mixed loads up to 5000 lbs at least 2 a month since rebuilding it completely and have had no problems stopping. only issue is lost a grease cap plug recently
by: Scott P06/22/2017
Excellent customer service. A few contents were missing from the trailer brake assy. Contacted ETrailer and the friendly customer service rep was more than helpful to be sure that I received my missing parts. Will definitely purchase again through ETrailer. Thanks again.
by: Robert02/02/2018
Ordered a trailer Drum kit (5 by 5)... came at fair price, I am very pleased.. Shipping was fast and low cost (3 day priority) and was actually here in 2 days (bonus points) The drum coming with the race already pressed in was a huge help to be as I live way out in the sticks and am limited on tools . I will for sure use etrailer again should I need more parts to keep my landscape business going...Thank you
by: Jeff07/25/2020
Great service and follow up, parts arrived packaged and un damaged after long trip and multiple warehouse/truck transfers. Tracking was spot on so I could plan to put parts on trailer the day they arrived. Hub and bearing assy is the way to go, slide them on and torque up.
by: Daniel06/03/2021
Added brakes to the second axel of my utility trailer. This hub with pre-greased bearings make it soooo easy.
by: Zack E.08/16/2018
Excellent service! My trailer brakes and hubs arrived on time and fast. I am very pleased and will use etrailer.com for all of my future trailer needs!
25
112
Show More Reviews
See what our Experts say about this etrailer Trailer Hubs and Drums
- Recommended Hub And Drum Assemblies With 5-On-5 Inch Bolt PatternI've attached an article to help you with how to measure to determine your bolt pattern. With 3 inches on center, you have a 5 on 5 inch bolt pattern. The 5 on 5 bolt pattern is generally only found on 3500 lb axles. For a hub and drum assembly, I recommend the Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 5 # AKHD-550-35-EZ-K if you have the EZ lube spindles or the Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5 # AKHD-550-35-K...
view full answer... - Replacement Hub/Drums for 3500 Axle With 5 on 5 Bolt PatternFrom what I found online, a 2020 Jeep Wrangler and Grand Cherokee use a 5 x 127mm bolt pattern, which is equivalent to a 5 on 5 bolt pattern like the # AKHD-550-35-EZ-K hub/drum you'd looked at. A 3500 lb axle will typically use a L8149 inner and L44649 outer bearing which is compatible with that hub, so the hub should work with your spindles as well as wheels that will fit your Wrangler or Grand Cherokee. You'll want to check the diameter of your spindle where the grease seal rides to...
view full answer... - 10 inch Brake Drum Recommendation for Trailer with 5 on 5 inch Bolt PatternFor a hub/drum that is designed for 10 inch by 2-1/4 inch brake assemblies that has a 5 on 5 inch bolt pattern we have the part # AKHD-550-35-EZ-K which matches all of that criteria.
view full answer... - How To Switch to 5 on 5" Bolt Pattern With Dexter 3,000 Lb Torsion AxleThe correct hub/drum you'll need to switch to a 5 on 5" bolt pattern is the Trailer Hub and Drum Assembly part # AKHD-550-35-EZ-K which will fit a Dexter 3,000 Lb Torsion Axle.
view full answer... - How Many of the Trailer Hub and Drum Assembly AKHD-550-35-EZ-K Are Needed for a Single Axle TrailerIf you have a single axle trailer you would need to order two Trailer Hub and Drum Assembly part # AKHD-550-35-EZ-K as they are sold individually.
view full answer... - What Axle Capacity Do Hubs with 5 on 5 inch Bolt Pattern FitAll hubs that have a 5 on 5 inch bolt pattern fit 3,500 lb trailer axles like the # AKHD-550-35-EZ-K. They are not interchangeable to any other axle capacity.
view full answer... - What Trailer Hub Would I Need For My 3500 Pound Axle With 5 On 5 WheelsI recommend the Easy Grease Trailer Hub and Drum Assembly # AKHD-550-35-EZ-K. It is rated for a 3,500 pound axle and has the 5 X 5 bolt pattern. They're pre greased which means that all bearings and races and seals are already inserted into the hub and drum when you receive it. The wheel studs are 1/2 inch diameter x 1-1/4 long. All pieces are include with the # AKHD-550-35-EZ-K. An installation video is below showing some more specs on the hub and drum.
view full answer... - What Issues Could Happen If 17" Wheel Was Used With Hub and Drum Assembly AKHD-550-35-EZ-K?17" wheels with the 5 on 5" bolt pattern will physically fit on Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 5 - Pre-Greased # AKHD-550-35-EZ-K you were looking at for your overlanding trailer, but the potential issue with using the 17" wheels is that there will not be enough contact between the mounting surface of the hub and wheel to support the larger wheel. Not having enough contact between the mounting surfaces can cause issues if you were to hit a...
view full answer... - Availability of Trailer hub with 5 on 5 inch Bolt PatternWe have replacement hubs for trailers that have the 5 on 5 inch bolt pattern you have but they'll need to be 3,500 lb axle assemblies as that's only capacity we have that bolt pattern in. For a hub drum you'd want the # AKHD-550-35-EZ-K or for an idler part # AKIHUB-550-35-K. To verify your axle capacity you can check the axle for a plate with ID info and the capacity should be listed there. Or you can measure diameter of axle and if it's 2-3/8 that would indicate it's 2,500 as well.
view full answer... - 5 on 5 or 5 on 4-3/4 Lug Pattern? How to Determine Which You HaveI would be happy to help you. The second 5 in the Easy Grease Trailer Hub and Drum Assembly item # AKHD-550-35-EZ-K 5 on 5 pattern is referring to the placement of the lug studs. Since yours are 2-3/4 center to center you will need a 5 on 4-3/4 pattern. The Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-3/4 item # AKHD-5475-35-EZ-K are identical to the ones you were looking at and fit the same spindle size. The only difference is they have the 5 on 4-3/4 lug pattern...
view full answer... - Replacement Hub for 2013 Wildwood 26TBSS Hub Drum with AL-KO 8700The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the # AKHD-545-35-EZ-K is the correct fit and would work great.
view full answer...
- How To Measure Bolt Pattern on Wheels or the Wheel Lugs on Hubs for CompatibilityThe Trailer Hub and Drum Assembly - 5 on 5 # AKHD-550-35-EZ-K and the Trailer Hub and Drum Assembly 5 on 4-1/2 # AKHD-545-35-EZ-K only vary in the bolt pattern for the wheels. I've attached an article to help you determine your bolt pattern. The 3500 lb axles are fairly standard in size, so the bearings and seals will most likely fit your axle. For proper fit, you will want to measure your 14 inch wheels and choose the hubs that are compatible. The most common bolt pattern is the 5...
view full answer... - Hub Assemblies For 3500 lb Axle On Tandem Axle Car Hauler 16 FootFor a 3500 lb axle, your options for bearing sizes are greatly narrowed down so that makes things a lot easier. You just need to determine your bolt pattern of your wheels. For traditional 5 on 4-1/2 inch bolt pattern, Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter, I recommend # AKHD-545-35-K. For 5 on 5 inches, I recommend # AKHD-550-35-K. For 5 on 5-1/2 inches, I recommend the # AKHD-555-35-K. For 6 on 5-1/2 inches, I recommend the # AKHD-655-35-K. If you have axles...
view full answer... - Replacement Trailer Hub and Brake Assemblies for AL-KO 8500 Hub/DrumFor a 3,500 lb hub/drum replacement that will work well to replace your AL-KO 8500 you'd want the hub part # 84546UC3-EZ which fits the spindle and has the 5 on 4-1/2 inch bolt pattern you need. For brake assemblies then the Electric Brake Assembly kit part # AKEBRK-35 would be what you need.
view full answer... - Replacement Hubs and U-Bolt Kit for 3,500 Pound Lippert Axle # LC35212150From my research your axle is a 3,500 pound, 2-3/8 inch diameter axle and since you have a 5 on 5 bolt pattern you likely have bearings # L44649 and # L68149. You'll want to verify this is correct with your current bearings. If this is the case for a hub and drum assembly I recommend # AKHD-550-35-EZ-K which is for E-Z Lube axles with a zerk fitting. If you have standard axles use # AKHD-550-35-K instead. If you only need idler hubs use # AKIHUB-550-35-EZ-K with E-Z Lube axles and #...
view full answer... - What Hubs/Drums and Brakes Fit My Lippert 3500 E-Z Lube Axles with 5 on 5" Bolt Pattern?For the hubs/drums for your 3500 E-Z lube Lippert axle, I recommend the Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased # AKHD-550-35-EZ-K. The Easy Grease are compatible with your E-Z lube axles and is compatible with 1/2" diameter x 1-1/4" long studs. As far as the brake assembly, I suggest the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA. These brakes come with self-adjusters...
view full answer... - Replacement 8-256 Hub With A Stud To Stud Measurement Of 3"If you are measuring 3" center to center from one stud to the next and the number on the hub is 8-256 then you have a 3500lb axle with a 5 on 5 bolt pattern. I recommend the Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 5 - Pre-Greased Item # AKHD-550-35-EZ-K. These come with the bearing installed and pre-greased. If you are needing to replace your brake assemblies as well I recommend the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right...
view full answer... - Will Trailer Hub and Drum Assembly AKHD-550-35-EZ-K Work On M416 Military TrailerThe best way to make sure you get the right hub and drum assembly is to pull one of the hubs on your trailer and check out the bearings. I have attached a photo that shows where the numbers should be on the side of the bearings. If you cannot find the number on the bearing you can use a digital caliper like part # PTW80157 and measure the inside diameter. Then measure the inside diameter of your hub and see if they match the dimensions of the bearings that are included with the # AKHD-550-35-EZ-K...
view full answer...
- Replacement Brake and Hub and Drum Kit for Dexter 3,500 lb AxlesWe do! For a brake kit I recommend going with the Self-Adjusting Kit # AKEBRK-35-SA for electric brakes or the Free Backing Kit # AKFBBRK-35 for hydraulic brakes. When it comes to the hub and drum assembly you can choose out of the following based on your bolt pattern: 5 on 4-1/2" - # AKHD-545-35-EZ-K 5 on 4-3/4" - # AKHD-5475-35-EZ-K 5 on 5" - # AKHD-550-35-EZ-K 5 on 5-1/2" - # AKHD-555-35-EZ-K 6 on 5-1/2" - # AKHD-655-35-EZ-K I am attaching some helpful articles that you can check...
view full answer... - Recommended Replacement 3,500 lb Axle for Carson Trailer with 88" Hub-Face and 74" Spring-CenterWe do have a replacement 3,500 lb axle for your Carlson trailer as well as hubs that fit your description. The axles that we carry have an 89" hub-face and 74" spring-center measurements so since the hub-face dimensions are only 1" off of what you measured these will work well for your application. I'm pretty sure that your axle has the 89" hub-face measurement as that is extremely common (and measuring the hub-face is a little difficult) but even if our axle hub-face is 1" wider there...
view full answer... - Is There 3,500 lb Trailer Axle With 89 Inch Hub Face Length & 5 on 5" HubHello 89 5, We do have a 3,500 lb axle with 89 inch hub face to hub face and 74 inch spring center to spring center that will work with a hub that has a 5 on 5" bolt pattern, but the hub just needs to be purchased separately as they don't come in a single package. You can choose from either a hub and drum or idler hub and here's what you'll need: - Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs # T3584F-EZ-8974 - Easy Grease Trailer Hub and Drum Assembly # AKHD-550-35-EZ-K OR -...
view full answer... - Converting From 4 On 9.44 to 5 On 5 Bolt PatternIf you want to convert to a 5 on 5 bolt pattern the only option is for 3,500 lb axles. Assuming you have # L68149 inner and # L44649 outer bearings you could use # AKIHUB-550-35-EZ-K for an idler hub or # AKHD-550-35-EZ-K for a hub and drum assembly. If not, you would be looking at replacement axles which would require measuring the hub face to hub face length. You will also need to know the capacity. If it is above 3,500 lbs then there is no option available to work with the 5 on 5 bolt...
view full answer... - 15 Inch Wheels For New Trailer Axle That Switched To 5 On 4-1/2" Bolt Pattern From 5 On 5"You will have to verify the correct wheel width required for your tires as we have the Dexstar 15" x 5" # AM20422 and 15" x 6" # AM20522. Both these are our most price conscious wheels and have the 5 on 4-1/2" bolt pattern you are needing. We do have hubs for a 3,500lb axle with the 5 on 5" bolt pattern if you have a 3,500lb axle and want to retain your current wheels. We have Idler Hubs # AKIHUB-550-35-EZ-K and Drum Hubs # AKHD-550-35-EZ-K which fits the common 3,500lb axle. If you can...
view full answer... - Trailer Hub for 3,500 lb Axle That Has 5 on 5 Bolt PatternThere are idler hubs as well as hub and drums with a 5 on 5" bolt pattern for a 3,500 lb axle: - Trailer Hub and Drum Assembly # AKHD-550-35-K (Standard Spindle) or # AKHD-550-35-EZ-K (E-Z Lube Spindle) - Trailer Idler Hub Assembly # 84550BX (Standard Spindle) or # 84550UC1-EZ (E-Z Lube Spindle) These will work so long as you have inner bearing L68149, outer bearing L44649 and grease seal 58846. They all have a 5 on 5" bolt pattern and are pre-greased for your convenience. I have added...
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Edited by:
Lindsey S
Installed by:
Jeff D
Installed by:
Randy B
Video by:
Jacob T
Video by:
Kathleen M
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Mike S
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Lionel
10/7/2023
Everything is working perfectly! Thanks!