Replacement Hydraulic Brakes and Hub/Drum Assembly for 3,500 lb Boat Trailer Axle
Question:
I bought a 2000 skeeter bass boat, the surge brake assembly’s are missing on on the left and right. The brake lines are there. My question is what kit do I need? The trailer is a single axle.
asked by: Josh G
Expert Reply:
Your trailer axle is likely rated for 3,500 lbs which means you need the following parts:
- Hydraulic Brake Kit - Uni-Servo - Free Backing # AKFBBRK-35-D
- Easy Grease Trailer Hub/Drum Assembly # AKHD-545-35-G-EZ-K for 5 on 4-1/2" bolt pattern
- Easy Grease Trailer Hub and Drum Assembly # AKHD-655-35-EZ-K for 6 on 5-1/2" bolt pattern
The brake kit comes with both the left and right side assemblies but you'll need to get 2 of either hub and drum assembly as they only come as a single unit.
Products Referenced in This Question
Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
- Trailer Brakes
- Hydraulic Drum Brakes
- Marine Grade
- Free Backing
- Manual Adjust
- Single Servo
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-35-K
- Video: BoatBuckle Pro Series Kwik-Lok Transom Tie-Down Straps Review imf17632
- Video: BoatBuckle Heavy Duty Ratchet Transom Tie-Down Straps Review
- Video: BoatBuckle Tie Down Straps - Trailer - IMF17632 Review
- Video: BoatBuckle Kwik-Lok Transom Tie-Down Straps Review
- Video: TruRyde Trailer Bearings Races Seals Caps - Caps - RG04-040 Review
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-35-EZ-K
- Shop: BoatBuckle Pro Series Kwik-Lok Transom Tie-Down Straps - 2" x 4' - 400 lbs - Qty 2
- Shop: Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Shop: BoatBuckle Heavy Duty Ratchet Transom Tie-Down Straps - 2" x 4' - 833 lbs - Qty 2
- Shop: Roller Shaft w/Cap Nuts 19" x 5/8"
- Q&A: Replacement Trailer Brake Drums For Dico 15638 With ST175/80R13 Wheels and Tires
- Q&A: Correct Replacement 10" Free-Backing Braking Assemblies
- Q&A: How to Choose the Correct Tie-Down for a Boat and Trailer
- Q&A: How to Determine Correct Brakes for Trailer
- Q&A: Will the Hydraulic Brake Kit for 3,500 Lb Axles Work with 13 Wheels
- Q&A: Troubleshooting Grease Seal Failure when Using Bearing Buddy Bearing Protectors
- Q&A: Replacement Hub Assembly for T.D.E. 11033