Replacement Brake Kit for a 1995 Mastercraft Single Axle Boat Trailer with 3,500 Lb Axle
Question:
i need to replace the complete braking system on a 1995 mastercraft single axle trailer from the tounge to the wheels . i need all new lines and the pads are all rusted. The wheels are 14", drums are 10", and the bearing are L68149 and L44649.
asked by: Rodney H
Expert Reply:
I have attached for you below a complete list of parts you will need to replace the brakes on a 1995 Mastercraft Single Axle Boat Trailer. It appears you have a standard 3,500 lb axle so the parts are all easily attainable.
Trailer Hub and Drum Assembly part # AKHD-545-35-G-K (Standard Spindles)
Trailer Hub/Drum Assembly part # AKHD-545-35-G-EZ-K (E-Z Lube Spindles)
Hydraulic Brake Kit part # AKFBBRK-35-D
Demco Hydraulic Brake Line Kit part # DM5402
Demco Hydraulic Trailer Brake Actuator part # DM72VR
Products Referenced in This Question
Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
- Trailer Brakes
- Hydraulic Drum Brakes
- Marine Grade
- Free Backing
- Manual Adjust
- Single Servo
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Demco Hydraulic Brake Line Kit for Single Axle Trailers - Drum Brakes
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Hydraulic Drum Brakes
- Brake Lines
- Steel Brake Line
- Brake Line Kits
- Single Axle
- Demco
more information >
Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Straight Tongue Coupler
- Bolt-On
- 7000 lbs GTW
- 2 Inch Ball Coupler
- Drum Brakes
- No Lockout
- Demco
more information >
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Parts Needed To Add Electric Drum Brakes To A Pontoon Trailer
- Q&A: Can Electric Brakes be Used on a Boat Trailer
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Hub & Drum For UFP HD-1377-10 & Hydraulic Brakes For Boat Trailer
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Dexter Replacement Hub/Drum Assembly # K08-247-1G
- Q&A: Rotor Size of Kodiak Disc Brake Kit for 3,500 lb Axles
- Q&A: Demco vs. etrailer Hydraulic Dacromet 3,500 lb Trailer Brakes
- Q&A: Parts Needed To Convert 1998 Nitro Boat Trailer from Hydraulic Drum Brakes To Hydraulic Disc Brakes
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)