2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 14,000 lbs
(2477 reviews)
Price: $26.48
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 14,000 lbs
Our Price: $26.48
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that are ready to ship
- All Info
- Reviews (2477)
- Q & A (0)
- Videos (2)
- Photos
Draw-Tite Trailer Hitch Ball
- Trailer Hitch Ball
- 2-5/16 Inch Diameter Ball
- 1-1/4 Inch Diameter Shank
- Standard Ball
- 14000 lbs GTW
- Class IV
- Class V
- Chrome-Plated Steel
- Draw-Tite
- 2-3/4 Inch Shank Length
Durable steel ball has a 1-1/4" diameter x 2-3/4" long shank. Built-in wrench flats ease installation. Chrome finish resists corrosion. Fine threads provide strong grip. Lock washer and nut included.
Features:
- Hitch ball provides a connection point for your trailer's coupler
- Fine threads provide exceptionally tight, strong grip
- Durable steel construction
- Corrosion-resistant chrome finish
- Built-in wrench flats make it easy to hold ball in place while tightening the nut
- Lock washer and nut included
Specs:
- Ball diameter: 2-5/16"
- Shank dimensions: 1-1/4" diameter x 2-3/4" long
- Weight capacity: 14,000 lbs
- Fits ball mount platforms 3/4" to 1-1/4" thick
- Limited lifetime warranty
63836 Draw-Tite 2-5/16" Diameter Hitch Ball with Medium Shank - 14,000 lbs GTW - Chrome
Replaces 74905
Item # 63836
California residents: click here
Video of 2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 14,000 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Draw-Tite Trailer Hitch Ball - Trailer Hitch Ball - 63836
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at this Draw-Tite 2 5/16 diameter chrome hitch ball, has a 14,000 pound weight capacity. Now, this hitch ball provides a connection point for your trailer's coupler. They do use the fine threads on this to provide an exceptionally tight, strong grip, and it is a durable steel construction. You can see it has a nice corrosion resistant chrome finish to it, and also, if you noticed, the flat sides here, these are built-in wrench flats that make it very easy to hold the ball in place while you're torquing the nut down. Does include the lock washer and the nut, it's all included.
Basically, when you go to install this, you'll put on your lock washer, put on your nut, and then torque it down to the correct specs. Again, the ball diameter is 2 5/16 inches, which is stamped on the top. The weight capacity is 14,000 pounds, which again is stamped on the top. Give you a few dimensions on this, we're gonna measure the shank. Now, this is designed to fit ball mount platforms that are 3/4 of an inch to 1 1/4 inch thick.
So the shank length is gonna be right at 2 3/4 quarter inches long, and the shank diameter is right at 1 1/4 inches. But that should do it for the review on this Draw-Tite 2 5/16 inch chrome hitch ball with the 14,000 pound capacity..
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 14,000 lbs - 63836
Average Customer Rating: 4.8 out of 5 stars (2476 Customer Reviews)
Durable steel ball has a 1-1/4" diameter x 2-3/4" long shank. Built-in wrench flats ease installation. Chrome finish resists corrosion. Fine threads provide strong grip. Lock washer and nut included.by: Steven 03/22/2024
Very helpful! Immediately notified me that the ball I had ordered was out of stock. E-trailer suggested an alternative, and expedited the order to me after I accepted.
by: Eric/ IRON HITCH CO.04/14/2024
Great product, excellent service from etrailer! Thank you guys!
by: Herb P08/27/2017
It's a hitch ball and does the job. Nothing glamorous to report. Retired the previous hitch ball due to its age (25 years).
by: Ronald11/30/2018
The hitch ball is exactly what I was looking for. It has the wrench flats I wanted to be able to keep the ball from rotating while tightening or loosening the ball. It also has a gross tow rating of 14,000 lbs which was on the higher end of hitch balls with wrench flats. As usual, etrailer was easy to deal with.
by: Mark J07/06/2016
It's a hitch ball. Simple. But you do need a 1 7/8" socket to install it. And the ability to torque it to 450ft lbs.
by: DKonle08/26/2015
My order of hitch ball, ball mount and pin was delivered on time.
by: Aloha Auto Center01/09/2017
I just received my ball mount receiver and ball. Great looking product. I'm excited to see how the cushion works. Torqueing the ball to 450ft lbs. was fun!!!
by: Martin 04/05/2023
Well made, works like it should
by: SteveO01/16/2016
I purchased this ball for my 10k lb trailer project. Although I haven't been able to use this ball yet, the quality looks to be very nice.
by: Ellen C06/25/2012
Very substantial ball, washer, and bolt. I wish it came with more detailed installation instruction as I wasn't quite sure where the washer needed to go.
by: Holly M11/03/2012
Very solid and fit perfectly in the hitch that I had. Haven't used it to pull the trailer, yet, but will be doing that within the next week or so. I think it will be just perfect.
Thank you for a great site with "how-to's" and for your easy ordering, conscientious follow-up, and quick processing.
by: John02/23/2022
Hitch ball...does what its suppose to.
by: Tom F06/07/2012
Good fit. You'll need 2 - 2" wrenches and a big 3ft pipe to crank to 600 ft lbs. Best done when draw bar and head are mounted on vehicle.
by: William05/24/2019
fast service! good products !!! would buy from etrailer again.
by: skip m06/17/2014
Great ball!!!
Skip M.
6/19/2015
working great....
by: Steve01/17/2018
Appears well built and "feels like an A." (Back to School)
Says it's good for 14,000 lbs.
I'm pulling 12,000 lbs.
I hope I don't have to retract my 5 star rating - ever.
by: Rehanon05/28/2021
Wonderful product! Most importantly their customer service was beyond exceptional. I ordered incompatible items and instead of just shipping them they reached out to better understand my need, and get me the right items. Every person I worked with was phenomenal! Huge shout out to Tyra F she saved my life with this move!
by: Chris06/21/2015
Just as shown, good quality, fits well. Not: Requires a 2" wrench or socket and the ability to tighten to 425 ft lbs.
by: Jena11/18/2016
So far so good!
No Problems
by: Tim S.03/22/2017
Worked great. Built well
by: Pete01/31/2013
nice ball, works well, needed to have a pro tighten it to the recommended foot lbs of torque(450#). most of us do not own tools this big....that cost me $5.00
by: Mass Crane03/30/2020
we received exceptional & professional service on this (our first) order
by: wes j04/16/2012
this is a great product ! you always have what i need. i will be shopping with you again. thanks
by: Richard 05/20/2021
Im sure it will work fine. havent used it yet.
25
2460
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch Ball
- Is Blue Ox SwayPro Weight Distribution Hitch BXW0350 Right For 250 lb Tongue WeightFor your R-Pod 151 with a tongue weight of about 250 lbs, you absolutely have the right option with the Blue Ox weight distribution hitch you asked about: - Blue Ox SwayPro Weight Distribution with Sway Control # BXW0350 This system is for tongue weights that are up to 350 lbs, which is perfect for your trailer, and is going to give you a superb combination of leveling and sway control to make towing your R-Pod a much more comfortable experience. It is also one of the easiest systems...
view full answer... - Recommendation of Weight Distribution and Sway Control System for 4x6 Inch I-Beam Trailer FrameI spoke with my contact at Reese and he said that you will need to use a standard weight distribution kit like the Heavy Duty Trunnion Weight Distribution System 1,500 lbs. TW / 15,000 lbs. GTW, item # RP66131, for your trailer with 4 inch wide by 6 inch tall I-beam construction. To use the Heavy Duty Trunnion Weight Distribution System, item # RP66131, you will need to have a steel plate 5 or 6 inches wide welded, by an experienced welder, at 30 inches on center from the center of the...
view full answer... - Installation and Fit of the Draw Tite Hitch Part # 41920 on a 2001 Ford F-150 SupercrewYes, the Ultra Frame Receiver Hitch, item # 41920, will fit your 2001 Ford F-150 Supercrew Pickup. You will need to drill one, 1/2 inch, hole in each side of the vehicle frame to install the Ultra Frame Trailer Hitch. Some items you may need to complete your towing setup are listed below. Drawbar # 40331 Hitch Ball # A-90, # 19286 or # 63836 Hitch Lock # e98882 Wiring # 118344 or # 74682
view full answer... - Hardware Included for Installation of Curt # 14055 Hitch Installation On 2004 Ford VanYes the Curt Class IV Trailer Hitch, item # 14055 includes all necessary hardware, bolts, washers and spacers needed for installation. I have included a link for install instructions for you to review. Some items you may need with the Class IV hitch are listed below. Wiring # 119178KIT Drawbar # BWBMHD30010 Hitch Ball # A-90 or # 19286 or # 63836 Hitch Lock Kit # e99039
view full answer... - Difference In Draw-Tite Class IV Hitch Compared To Lower Priced Class IV HitchWhen comparing the Draw-Tite Ultra Frame Trailer Hitch Receiver - Class IV, part # 41929, to the Curt Trailer Hitch Receiver - Class IV, part # 14361, they are similar, but the new version of the Draw-Tite # 41929 is rated higher. The Draw-Tite Class IV Hitch has a tongue weight capacity of 1,200 pounds and towing capacity of 12,000 pounds. The Curt Class IV Hitch has a tongue weight capacity of 1,000 pounds, and towing capacity of 10,000 pounds. Both part # 41929, and part # 14361 have...
view full answer... - Weight Distribution Recommendation for a 2006 Dodge Ram 1500 pulling a 26 ft 4900 lb trailerBased on the numbers you gave me it would not be required that you use a weight distribution hitch on your 2006 Dodge Ram 1500, but it would greatly improve the ride of your towing setup and overall towing experience by leveling out your vehicle and trailer, increasing your steering, brake performance, increasing traction and decreasing sway. If you are planning on using the trailer frequently a weight distribution system would be a good investment, especially since it would decrease the...
view full answer... - Recommended 2-5/16 Hitch Ball For Reese Stedi-Flex Weight Distribution HitchI recommend the 2-5/16" Hitch Ball # 63836 to use with the Reese Steadi-Flex Weight Distribution System w/ Sway Control # RP66560. This hitch ball carries the same 14K weight rating as the Stedi-Flex to ensure that you never exceed the weight capacity of a single component. You will need a 1-7/8" 12pt Thin Walled Socket # ALL643216 to properly install the hitch ball on the Stedi-Flex hitch.
view full answer... - Correct Ball Size for Reese 66557 Weight Distribution HitchThe High Performance Reese Weight Distribution System, item # 66557, is designed to use a medium shank hitch ball with a length between 2-5/8 inches and 2-3/4 inches. I have listed 3 recommended balls below. Hitch Ball with 2-5/16 Inch Diameter and Medium Shank, 12,000 lbs GTW # 19286 Hitch Ball with 2 Inch Diameter and Medium Shank, 8,000 lbs GTW # A-90 Hitch Ball with 2-5/16 Inch Diameter and Medium Shank, 14,000 lbs GTW # 63836
view full answer... - Wiring Plug, Hitch, and Accesories For 2003 Chevrolet Avalanche Towing 23 Skamper Travel TrailerThe item you selected, Pollak 7- and 4-Pole Trailer Connector Socket , part # HM40975, plugs into factory connector above the spare tire. You can use part # HM40975 if the vehicle wiring will reach to plug into your vehicle. If you find you need extra length of wiring to connect I would recommend Replacement Multi-Tow 7-Way and 4-Way Trailer Connector, part # 30955, which is designed to work on your Avalanche, and will plug into the factory connector above spare tire underneath your truck....
view full answer... - Weight Distribution System Recommendation for a 2015 Ford F-150 Towing Car HaulerSuspension enhancement is great for vehicles that are carrying a heavy load in the cargo area of the vehicle. But if the sag is from towing a trailer a much better solution is a weight distribution system. This will take the tongue weight of the trailer and partially distribute it to the front axle of the vehicle which will give it better braking and handling characteristics than with suspension enhancement. The best way to pick out a weight distribution system is to base it off of the...
view full answer... - Which Hitch Ball is Better, the Curt or the Draw-Tite?Both the Draw-Tite item # 63836 and the Curt item # C40030 will work with the Convert-A-Ball Ball Mount item # AMSC4HD. The 1/8" difference in shank length will not affect the function of the hitch ball. I recommend the Curt item # C40030 because it has a slightly higher capacity and it will save you some money.
view full answer... - Does the Titan Ball Mount # 45123 Have the Same Weight Capacity when Used in the Rise PositionThe Titan Ball Mount you referenced, part # 45123 can certainly be used in the rise position. The ball mount has a 3-1/2 inch rise, and has the same 12000 lb towing/ 1200 lb tongue weight capacity when used in the rise position. This ball mount requires a trailer ball with a 1-1/4 inch diameter shank like the # A-90 2 inch ball or the # 63836 2-5/16 inch ball. This ball mount is not compatible with the Ford Super Duty OEM 2-1/2 inch receiver.
view full answer... - Weight Distribution Recommendation for Towing a 14,000 lb rated 25 Foot trailer behind a MotorhomeWe have 3 options for you to choose from. I will list them below. Strait-Line Weight Distribution w Sway Control, item # RP66130, up to 1500 lbs Tongue Weight Blue Ox SwayPro Weight Distribution System w Sway Control, item # BXW1500, up to 1500 lbs Tongue Weight Reese Steadi-Flex Weight Distribution w Sway Control, item # RP66561, up to 1400 lbs Tongue Weight I would select the option that you chose, Reese Steadi-Flex Weight Distribution w Sway Control, item # RP66561, if your trailer...
view full answer... - Availability of an Adapter to Use the Titan Hitch Extender # RP45292 with a 2 Inch HitchI cannot recommend either of the situations that you mentioned for safety reasons. If you were to make a reducer for the Titan Hitch Box Extension for 2-1/2 inch Trailer Hitches, 24-34 inches, item # RP45292, it would lower the weight carrying capacity of the hitch and the extension and could cause an unsafe towing condition. A solid steel bar while it seems very sturdy would most likely have less weight carrying capacity than a square tube extension like the Titan extension. The best...
view full answer... - Weight Distribution System For A 2017 Chevrolet Colorado Pulling A 3,300lb CamperThe main issue using a weight distribution hitch rated for a higher capacity than needed like the Fastway e2 Weight Distribution # FA92-00-1200 is that it can cause a stiff ride. It does not increase towing capacity because that is always limited by your lowest rated component. Generally you want to use tongue weight to drive the selection of a weight distribution system. Tongue weight is the weight that the fully loaded trailer exerts downward on the hitch ball of the tow vehicle....
view full answer... - Ball Shank Diameter Required for Reese Weight Distribution SystemsYou will need to get a ball with a medium size shank to go with the Replacement Head # RP58167 that you referenced. Medium shank balls have a diameter of 1-1/4 inches. If you need a ball with a 2-5/16 inch diameter you would want a Hitch Ball # 63836. If you need a ball with a 2 inch diameter you will want a Hitch Ball # A-90.
view full answer... - Reese Weight Distribution System Recommended for 1500-lbs of Tongue WeightReplacement head assembly # RP58167 is for trunnion bars like # RP58369 so it will not work for round bars. Instead use part # RP58112. You can use your old shank since it will have the same design. Since your system is older and you need to upgrade it too I suggest you replace the entire set-up. That way you have no concerns about old and new parts fitting properly and you'll have the comfort of knowing that everything is new and in good shape. For a loaded trailer tongue weight in the...
view full answer... - Weight Distribution Recommendation for a 2015 Ford Expedition and 8,600 Pound TrailerTo choose a weight distribution system you will need to go by the total tongue weight of the set up. This is calculated by taking the tongue weight of the trailer, when loaded and ready to tow, and adding to that the weight of anything loaded behind the rear axle of the tow vehicle. A trailer that weighs 8,600 pounds max would have a tongue weight in the neighborhood of 860 to 1,290 pounds not counting anything behind the rear axle of the tow vehicle. For this weight I recommend Reese...
view full answer... - Recommended Weight Distribution System for Aluminum Frame 10,000 lb TrailerWhen choosing a weight distribution system, you want to go off the total tongue weight. This total tongue weight includes the loaded weight of the trailer tongue that you stated along with any cargo behind the rear axle of the towing vehicle. As long as your frame is not wider than 2-1/2 inches, I have a system that is compatible. I recommend the Reese Titan Weight Distribution w/out Shank - Trunnion Bar - 17,000 lbs GTW, 1,700 lbs TW # RP66006. This system does not have the integrated...
view full answer... - Weight Distribution System Recommendation for a 8,500 lb Boat Trailer with Surge BrakesThe best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow, this figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached an FAQ on determining tongue weight for you to check out as well. Typically tongue weight is 10-15 percent of the total trailer weight. At your total trailer weight of 8,500 lbs you will most likely have a tongue weight range of 850-1,275...
view full answer... - Recommended Class V Hitch for 2006 GMC Sierra for Towing 10,800 lb BoatI'd recommend upgrading that hitch, ASAP. If the hitch fails while you're towing, causing an accident, your insurance company would be well within their rights to deny you coverage which would leave you wide open to all kinds of legal liability. Not a pretty situation. Usually, Class V hitches do indeed have a 2-1/2 inch receiver tube. However, companies like Curt Manufacturing, Draw-Tite and B&W have developed Class V hitches with a 2 inch receiver tube that are strong enough to be classified...
view full answer... - Trailer Hitch Recommendation for 2015 Ford F-150 for Towing 10k TrailerFor a 10,000 lb rated trailer hitch confirmed to fit your 2015 Ford F-150 without a factory hitch you would want the part # C26HR. I attached an install video for this for you to check out as well. You will need a brake controller to activate the brakes of your trailer. For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller...
view full answer... - Weight Distribution System Recommendation for Trailer with 1,500 lbs Tongue Weight For a weight distribution system for a tongue weight that is 1,500 lbs when loaded and sometimes 900 lbs you would want the Reese part # RP66131 but you would have to verify that your tongue weight would not exceed 1,500 lbs when loaded. Basically you would be at the edges of this systems range that is 800 to 1,500 lbs. For a shank you would then want the part # RP54970. For either tongue weight you would have to basically set the system up totally different. Easiest way to go between...
view full answer... - Replacement Head for Reese Trunnion Style Weight Distribution SystemI spoke with my contact at Reese and he confirmed that the replacement head for your Reese weight distribution system is part # RP58167. If you need a replacement shank you will want part # RP54970. This shank has a 2" drop to 6-1/2" rise and a 1,500 lbs. tongue weight. I have attached the installation details for the replacement head for you to check out. If you need a hitch ball with a 2-5/16" diameter I recommend part # 63836. This ball has a gross trailer weight of 14,000 lbs. If...
view full answer...
Do you have a question about this Trailer Hitch Ball?
Info for this part was:
Installed by:
Jeff D
Installed by:
Bradley B
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Brian T
Video Edited:
Dustin K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Herb P.
8/27/2018
Its doing fine, expect many years of service