Replacement Wheel for Brophy Heavy-Duty Cable Camper Jacks - Qty 1

See what our Experts say about this Brophy Accessories and Parts

• What is the Width of the Replacement Wheel for Brophy Heavy-Duty Cable Camper Jacks?
  I confirmed with my contact at Brophy that the width of the Replacement Wheel for Brophy Heavy-Duty Cable Camper Jacks # 1206 is about 1-1/2 inches.
  view full answer...
• Diameter of Replacement Brophy Wheel # 1206 and Hole Diameter
  I spoke with my contact at Brophy and she informed me that the Replacement Wheel part # 1206 that you referenced is 6 inches in diameter and has a 1/2 inch diameter hole.
  view full answer...
• Recommended Replacement Trailer Jack Wheel That Has A Rubber Tire
  It sounds like you're looking for something like the: -Replacement Wheel for Brophy Heavy-Duty Cable Camper Jacks # 1206. This tire has a 1/2" diameter hole, is 1-1/2" wide, 6" in diameter, and has a rubber tire like you're looking for. If you need anything else please feel free to let us know and we'd be happy to help.
  view full answer...
• Does LiftDogg LiftGate for 2019 Ford F-150 Allow Use of Factory Hitch
  If you check out the attached install picture of the LiftDogg Custom-Fit Pickup Truck Liftgate for Ford - 55" Wide x 39" Deep Platform # 33713006039-1206 you can see that the factory hitch is installed below the liftgate like you were asking about.
  view full answer...
  
• Replacement Side Frame Trailer Jack For Small Boat Trailer
  The Round Swivel Marine Jack w/ Wheel # MJ-1206B will work great for your small boat trailer. The trailer jack has a bolt-on installation to the side of your trailer. The jack has a swivel design that allows you to swing jack up for storage, and down for use. The jack has a lift capacity up to 1,000 pounds. When the trailer jack is extended it is 23-1/2 inches long. Using this jack will make it easier than your original because the inner tube rotates with the wheel allowing you to move...
  view full answer...
• Recommended Jack With Wheel For A 2006 StarCraft Pop-Up Camper And How To Add Brakes To It
  If you're talking about having a trailer jack with a wheel to easily maneuver your trailer around when parking and coupling then I recommend the etrailer Round Swivel Marine Jack w/ Wheel # MJ-1206B. This trailer jack has a bolt-on installation that works with frames 2" to 4" tall. It has a 1,000lb capacity so it's well over the tongue weight of your 2006 StarCraft pop-up camper. It has 10" of travel to help make coupling to your Nissan Pathfinder easier. To add brakes to the trailer...
  view full answer...
  
• Swivel Jack Compatible With Malone MicroSport Trailer With 2 Inch Wide x 3 Inch High Tongue
  Yes, the Round Swivel Marine Jack # MJ-1206B is compatible with the 2" wide x 3" high tongue on your Malone MicroSport trailer and is going to work well for you.
  view full answer...
• Does The Location Of The Swivel Jack On The Tongue Or Within The V Matter?
  The Round Swivel Marine Jack w/ Wheel - Bolt On - Zinc - Sidewind - 10" Travel - 1,000 lbs # MJ-1206B can absolutely be installed on the tongue part of the trailer. The video you are referring to I have attached and it wasn't added to the tongue because of the other components that are already present there. If you look at our customer photos you can see this jack can be used on the tongue without issue.
  view full answer...
• Replacement Jack for a 1996 Four Winns Boat Trailer
  We don't have any exact matches for what you have on your boat trailer so best option would be a new one that is similar like the # MJ-1206B which is a similar bolt on swivel jack with a sidewind handle.
  view full answer...
• How Does etrailer Ram Jack MJ-1206B get Lubricated
  There is a hole under where the handle inserts into the etrailer jack part # MJ-1206B which is where you'd spray lithium grease into to lubricate the screw and assembly.
  view full answer...
• Recommended Side Mount Trailer Jack for Log Splitter Trailer
  I do have some options for you but I am not sure you are going to find a trailer jack with all of the exact features you are looking for. The minimum lift we offer is 10" and all of the caster wheels are 6" diameter. If you can make these two things work then we have plenty of options which I have attached a list of for you like the Round Swivel Marine Jack w/ Wheel part # MJ-1206B.
  view full answer...
• Overall Stored Length of 1,000 Pound Round Swivel Marine Jack MJ-1206B
  When fully retracted swivel jack # MJ-1206B is approximately 41 inches tall, or long if it is swiveled up. I have included a link to a video review of this jack for you.
  view full answer...
• Trailer Jack Backup for Atwood Powered A Frame Jack
  Sounds like you are looking for a backup manual jack in case your powered A-frame jack fails. For that easiest solution would probably be the # MJ-1206B which you could easily bolt to the frame of the trailer as needed. I attached a review video for this jack for you to check out as well. In case you were looking for a replacement handle for an Atwood jack we no longer can get those parts since they aren't around anymore.
  view full answer...
• Overall Retracted Length of Round Swivel Marine Jack MJ-1206B
  I went to our warehouse and measured the Round Swivel Marine Jack # MJ-1206B for the dimension you asked for. When fully retracted, from the bottom of the wheel to the top of the jack tube the overall length of the jack is 23-inches. From the bottom of the wheel to the center of the mounting bracket the dimension is 13-inches. I prepared a photo for you showing these dimensions.
  view full answer...
  
• Recommended Replacement for a Shelby Trailer Jack Model 5756
  In order to replace the Shelby Trailer Jack Model 5756 you have on your trailer now, I recommend taking a look at the Round Swivel Marine Jack w/ Wheel part # MJ-1206B. This jack bolts onto a trailer frame up to 4" tall and will not require any welding. It has a zinc plating for corrosion resistance which is ideal for boat trailers and it has a caster wheel for easy maneuvering. There is an integrated swivel feature which operates with a pull pin and the jack can withstand up to 1,000 lbs...
  view full answer...
• Does Round Swivel Marine Jack MJ-1206B Come With All Mounting Hardware
  It does; the mounting hardware for the bracket is included with the bolt-on Round Swivel Marine Jack w/ Wheel - Bolt On - Zinc - Sidewind - 10" Travel - 1,000 lbs # MJ-1206B. So you won't need to buy anything else with the # MJ-1206B, it'll be ready to use when you get it.
  view full answer...
• How Much Does Round Swivel Marine Jack w/Wheel Bolt On Zinc Sidewind 10" Travel 1,000lbs MJ-1206B
  Round Swivel Marine Jack w/ Wheel - Bolt On - Zinc - Sidewind - 10" Travel - 1,000 lbs Item # MJ-1206B weighs approximately 15 pounds minus the weight of shipping materials which will be around 1 pound. I have linked a video review of this jack for you.
  view full answer...
• Are Replacement Parts Available for Shelby 5854A Trailer Jack
  Shelby has been out of business for a number of years now and so there unfortunately are no replacement parts readily available. You might be able to find something where old parts are regularly sold, but you'll probably have to do a lot of digging and it would be much easier to just upgrade your trailer jack now so that when something needs to be replaced in the future it's a lot easier. For a replacement I recommend checking out the Round Swivel Marine Jack w/ Wheel # MJ-1206B rated...
  view full answer...
• Replacement Options that Work with the Shelby Trailer Jack Mounting Bracket
  This is a common question people have but unfortunately we do not have nor am I aware of a trailer jack that will work with the mounting bracket you have on your trailer for the Shelby Trailer Jack which includes the Round Swivel Marine Jack w/ Wheel part # MJ-1206B. This jack will be one of the most cost effective replacements we have for you. The welded bracket for your existing trailer jack can be left installed on the frame and you can just place this jack either in front of or behind...
  view full answer...
• What Is Clearance Between etrailer Swivel Marine Jack Leg And Mounting Bracket
  I went to our warehouse and measured the clearance between the mounting bracket and the leg of the Round Swivel Marine Jack, part # MJ-1206B. That distance is 1-3/4 inches. I have attached a photo of the jack with the dimension noted you can check out.
  view full answer...
  
• Is etrailer.com Round Swivel Marine Jack w/ Wheel Rustproof around Salt Water
  The Round Swivel Marine Jack w/ Wheel - Bolt On - Zinc part # MJ-1206B is designed with a Corrosion-resistant clear zinc finish so it should not rust unless it is submerged for long periods of time or used for prolonged periods of time in salt water without being sprayed with fresh water. I recommend to rinse it off periodically with fresh water to keep away rust.
  view full answer...
• Will the TorkLift Trailer Hitch and Rear Camper Tie Down Fit a 2007 GMC Sierra 2500 Diesel Exhaust
  If you have a factory diesel or gas exhaust then the TorkLift SuperHitch Original Trailer Hitch Receiver part # TLC1206 will fit a 2007 GMC Sierra 2500 New Body 6-1/2' Bed. Once installed, you can then install the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLR3500 which again will fit models with the factory exhaust. If there are any aftermarket exhaust modifications, neither the hitch or tie-down would be confirmed.
  view full answer...
• Can A Bent Fulton Boat Trailer Jack Be Fixed
  Hey James, If the inner tube of the jack is bent then there's unfortunately not going to e a way to fix the jack and you'll have to use an angle grinder to cut off the old jack and replace it. If the wheel is detachable and the inner tube is still ok then we'd be able to just swap out the wheel. If replacement is the only option then I recommend the Round Swivel Marine Jack w/ Wheel # MJ-1206B. This jack comes with brackets to clamp onto the frame so that you can easily move it around...
  view full answer...
• Where Is the Round Swivel Marine Jack 1,000 Lbs Made
  The Round Swivel Marine Jack part # MJ-1206B is made in China. If you are looking for a domestic alternative, that would be the Pull Pin, Easy Swivel Trailer Jack part # DL22560.
  view full answer...

Do you have a question about this Accessories and Part?