Fulton F2 Fully Enclosed Trailer Winch with Strap and Adjustable Handle - 1,600 lbs
(277 reviews)
Price: $118.29
Fulton F2 Fully Enclosed Trailer Winch with Strap and Adjustable Handle - 1,600 lbs
Our Price: $118.29
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that can ship today
- All Info
- Reviews (277)
- Q & A (0)
- Photos
Fulton Trailer Winch
- Standard Hand Winch
- Boat Trailer Winch
- Utility Winch
- Polyester Strap
- Standard Duty
- Single Speed Winch
- Fulton
- Standard Hand Crank
The rust-resistant, cast aluminum frame on this fully enclosed winch makes it perfect for marine use. Other unique features include adjustable handle length and configuration, an easy-to-use pawl-engaging lever and a dual-gear drum. Strap included.
Features:
- Completely enclosed design is durable and stylish
- Cast aluminum frame provides corrosion resistance
- Aluminum, soft-grip handle offers ultimate adjustability
- Switch from right- to left-hand drive configuration
- Adjust the handle length to 6" or 7" to balance torque, speed and clearance
- Quick and easy installation with Fulton's Easy Install System
- Fits industry-standard mounting pattern
- Includes necessary hardware
- Easy-to-use lever engages and disengages pawl
- Dual-gear drum and solid drive gear allow for smooth, reliable operation
- Handle can be turned in reverse to slowly let out strap instead of freespooling
- Freespooling option available
- Rear strap guide helps to prevent strap from making contact with gears
- Strap with hook included
Specs:
- Handle length: 6" or 7"
- Gear ratio: 4.1:1
- Hub diameter: 0.65"
- Drum storage: 20' long x 2" wide strap
- For use with strap only
- Weight capacity: 1,600 lbs
- Limited lifetime warranty
FW16000101 Fulton F2 Marine Trailer Winch - 1,600 lbs
Item # FW16000101
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Fulton F2 Fully Enclosed Trailer Winch with Strap and Adjustable Handle - 1,600 lbs - FW16000101
Average Customer Rating: 4.8 out of 5 stars (277 Customer Reviews)
The rust-resistant, cast aluminum frame on this fully enclosed winch makes it perfect for marine use. Other unique features include adjustable handle length and configuration, an easy-to-use pawl-engaging lever and a dual-gear drum. Strap included.by: Quinn05/03/2024
It goes without saying, this thing is a beast. If you have to step to the tongue of your trailer to hook your bass boat in when trailering, you need this winch. No sharp edges to catch clothing, very powerful, and very sturdy.
by: Douglas02/10/2024
This winch is exactly what u was looking for. I especially like the two options for the winch handle. Now that I’m older that feature makes it easier for me to secure my boat.
by: William08/14/2021
The Fulton trailer winch seems pretty well made,is appealing to the eye, and serves its purpose well, but I would urge Fulton to use stainless steel hardware in the future.Many boaters don't have access to a garage so there vessel has to remain outside in the elements.
by: Daryl 03/20/2024
Item was just as described and shipped quickly. I winch has worked perfectly!
by: Louis 04/01/2024
The product arrive on time in the original packaging. Thanks
by: Tom08/20/2018
Just what I needed to replace my old worn out winch. Looks great on my boat and lots easier to use. Easy to install and had all the needed hardware. Shipping was fast and free !!! Great job etrailer !!!!
by: Roberto04/20/2018
This is still a very good product after a year of purchase. Very happy with it. Does the job and is good looking
by: Richard03/27/2020
Installed on trailer today. Easy to install great quality. Works
by: Michael02/06/2018
I ordered a spare tire and wheel along with a winch and spare tire mount, As always when dealing with etrailer the products were as described, at a very reasonable cost, and were shipped promptly. The packaging was first rate so there was no damage during shipping. My go to supplier for all my trailer parts and accessories. I heartily recommend that one should check them out. Thanks for the great service etrailer.
by: Dave S.12/08/2016
Very happy with the service from etrailer.com. Items arrived quickly and undamaged. I really like this Fulton jack and matching winch. They really freshened up my trailer.
Dave S.
12/9/2017
They are working just fine. Thanks for following up.
by: Charles12/22/2018
The Fulton boat winch has been working great. The winch handle, with the options has been especially working out for me.
And as always etrailer has provided exceptional service.
Charles
12/23/2019
It’s still working, again being able to swap handle in different positions has been a plus for me. As I sold the bass boat I had the winch on. But I swapped the winch over to my bay boat before I sold it, so I was able to keep the winch.
by: James S06/26/2020
This boat winch is easy to use and it looks great on my boat trailer it has a adjustable length handle for more leverage when needed
James S.
7/1/2021
Winch has worked flawlessly
by: Tony P.08/26/2017
Needed a replacement for the original winch on my boat trailer. Very impressed with the quality of item. Well built and easy to install.
Tony P.
8/27/2018
Everything has been good. All the products that I have purchased from you guys are holding up great.
by: Andy 09/08/2020
etrailer is the absolute best place to deal with for trailer parts especially when your in a hurry and always on the road. There ordering and shipping process is the fastest in the industry and when your broke down or needing parts in a hurry thats what matters most. Give em a try you wont be sorry. As for the winch I ordered, it was exactly what I ordered and needed, ten minutes to put the strap and handle on and another 10 minutes to switch it out. Back on the road and towing safely in under 30 minutes!
by: Blake10/16/2018
I installed this winch on my 07 BoatMate trailer to upgrade to an easier and safer (non exposed gear teeth) unit. My trailer uses two mounting bolts that go through a section of square tubing and are inline with each other. It was a little tricky to get the lower bolt installed, but it worked out well. The mounting issue is why I’m giving it 4 stars. It’s easy to operate and pulls the strap in quickly.
by: John W.09/22/2016
One year of operation and the winch has worked flawlessly. It is a good looking design. I have recommended Fulton winch to my friends with larger boats, who have purchased for their trailers.
by: Joseph02/01/2018
Trailer jack is working great ! The trailer winch works well and is easy to crank the boat when securing it on the trailer .
by: Allen 08/16/2018
Great product - good video - staff extremely knowledgeable - the products are exactly as described and pictured.
Allen
8/17/2019
works great
by: Troy08/21/2019
Bought a new Tahoe 1950 deck boat last year and the trailer had the Fulton XLT on it. It failed so I replaced it with this one. This one has the aluminum housing and is made in Mexico, the XLT has a plastic housing and is made in China
by: Best Winch04/26/2020
This is the best winch I have used. Easy to install, doesn’t bind, looks great, and you won’t get the strap caught in the gears! Well worth the money! Want a good winch? Buy this one!
by: Bob05/13/2019
The product arrived on time and was exactly the correct assembly. Installation was easy with the included instructions.
by: Dave12/19/2016
Fulton F2 jack and F2 winch Came today! on trailer and ready to go to the river on Wednesday< Easy to assemble A Big Thanks to George at E-trailer, will order again. Thanks Dave <><<
25
277
Show More Reviews
See what our Experts say about this Fulton Trailer Winch
- Replacement Fulton F2 Winch for Broken Winch Drum SolutionI checked with Fulton and the drum of the Fulton F2 winch part # FW16000101 that you referenced is not a replacement part they offer so you'd have to replace the entire winch.
view full answer... - Can the Pro Series PSKR15000301 Be Mounted for Left-Hand CrankingThough I do have a left-hand cranking winch available, I spoke with Pro Series and they said the Standard Brake Winch # PSKR15000301, having an automatic braking system, is not recommend to be wound in the opposite direction. With that said, the Fulton F2 Fully Enclosed Trailer Winch with Strap and Adjustable Handle # FW16000101 will actually be rated a little higher at 1,600 pounds, but the handle can be moved to the other side. This will be a much better option.
view full answer... - How Does Spring of Fulton XLT Winch InstallThe Replacement Spring # 4769-28 that you referenced will install onto the pawl assembly of your winch. Check out the pictures I attached that show an exploded diagram to see how it installs.
view full answer...
- Can Fulton F2 Fit with Dutton-Lainson Angle Mounting PlateYes, the following parts can be used together: - Dutton-Lainson Angle Mounting Plate # DL24059 - Fulton F2 Fully Enclosed Trailer Winch # FW16000101 - CE Smith Winch Stand # CE31013G - CE Smith Bow Roller Bracket for Winch Stands # CE31005PG The mounting holes for the Fulton F2 are a little wider than what comes on the mounting plate though so you'll have to modify the mounting plate to make it fit. The Adapter # DL24055 won't make it fit any better. We don't have any other winch...
view full answer... - Dimensions of the Fulton F2 1600 lb Trailer WinchThe Fulton F2 Fully Enclosed Trailer Winch with Strap and Adjustable Handle - 1,600 lbs # FW16000101 you referenced measures 6-1/2 inches high and at its longest is 8 inches, as you can see by the accompanying photo. The base of the Fulton F2 is 6-3/16 inches x 3-3/8 inches, and this winch uses an "Easy Install System" that allows for different mounting hole locations so it will definitely fit your winch bolt hole pattern. I have added a link to a video review which I strongly recommend...
view full answer...
- Replacement Ratchet Spring and Install Diagram for Fulton F2 WinchI spoke to my contact at Fulton and he said the correct replacement spring for the ratchet of your Fulton F2 winch is the part # 4769-28. I attached a picture that shows a diagram for the winch for you to check out. You will be able to see how the spring installs on the ratchet assembly.
view full answer...
- Winch that Can Fit in Place of Ranger Trailer Trailer WinchThankfully winch mounting brackets are all made to be pretty much the same and the winches have slotted mounting holes to allow for more flexibility there as well. So you could use a winch like the Fulton F2 # FW16000101 like you referenced.
view full answer... - How is Winch Strap of Fulton F2 Winch Accessed to Remove it. On a Fulton F2 winch like the part # FW16000101 you will need to remove the covers on the sides and back with a Torx T25 bit. There won't be tools needed to slide out the pin that holds the drum in place. Once it's out two 1/2 inch sockets/wrenches will be needed to remove the bolt that seats the strap. If it's a version of the winch that does not have the side black panels you'll need to separate the housing instead by removing the lower bolts on the base of the winch.
view full answer... - Recommended Replacement Winch for a 2002 Ranger 185VS TrailerDon, from what I can see, it looks like you've currently got a Fulton winch on your 2002 Ranger 185VS trailer. I did some poking around and I believe the Fulton F2 Fully Enclosed Trailer Winch with Strap and Adjustable Handle # FW16000101 would work great. This winch has a 1,600 lb capacity which is cutting it a bit close so I'd recommend going a bit bigger with the Fulton XLT 2-Speed Trailer Winch # F142425 which has double the capacity.
view full answer... - Solution for Replacement Drum for Fulton F2 Fully Enclosed Trailer WinchThe part you're referencing is the drum of the Fulton F2 Fully Enclosed Trailer Winch # FW16000101. Unfortunately, Fulton does not offer this part as a replacement. The only solution is to replace the winch with a new Fulton F2.
view full answer... - Will a 25 Foot Long Strap Fit Fulton F2 Fully Enclosed Trailer Winch FW16000101You could use Hand Winch Strap with Safety Hook, 2" Wide x 25' Long - 4,000 lbs. # DL24249 in place of the 20 foot strap that comes with Fulton F2 Fully Enclosed Trailer Winch with Strap and Adjustable Handle - 1,600 lbs Item # FW16000101. However you may not be able to fully wind all 25 feet of the strap onto the drum since it is 5 feet longer. I have linked videos on the winch and strap for you.
view full answer... - Recommended Marine Hand Winch For 3000-Lb BoatI have attached a link to a helpful article that explains how to choose the correct winch for a boat trailer. Here is what the article says: Finding the Right Capacity Winch for your Boat Trailer. Boat-size-to-winch capacity is generally 2 to 1 With good rollers and short winching distances, increase the ratio to 3 to 1 With wooden bunks and long winching distances, reduce the ratio to 1 to 1 For example, a 2,200-lb boat generally requires a 1,100-lb winch. If the same boat were winched...
view full answer... - Overall Dimensions of Fulton F2 Trailer Winch # FW16000101The Fulton F2 Fully Enclosed Trailer Winch # FW16000101 has an overall height of right at 6-1/2 inches. At its longest point, it measures 8 inches. The handle length can be adjusted to either 6 or 7 inches and the winch has a hub diameter of 0.65 inches. I have included an image with the overall dimensions labeled that you can also take a look at.
view full answer...
- Mounting Dimensions on Fulton F2 Fully Enclosed Trailer Winch # FW16000101The Fulton F2 Fully Enclosed Trailer Winch # FW16000101 referenced in your question has base dimensions, where it contacts the mounting location, of 3-3/8 inches by 6-3/16 inches. It features the industry standard bolt pattern, just like the 2,000 pound # FW20000301, that will allow the winch to be installed on almost any trailer. The two bottom bolts are spaced apart 2-1/4 inches on center, and the top bolt is 4-1/2 inches from both bottom bolts, on center. I have attached a short video...
view full answer... - Recommended Replacement Winch For a Discontinued Shelby Model 5403 WinchI recommend replacing your Shelby 5403 winch with the Fulton F2 Fully Enclosed Trailer Winch # FW16000101. Your Shelby winch is out of production and no longer available. This Fulton is a fully enclosed winch making it safer to use and includes a 20' strap. It is rated with a capacity of 1,600lbs and has an adjustable handle that allows you to position it where you feel most comfortable using.
view full answer... - Recommended Replacement Hand Winch for 1996 EZ Loader Boat TrailerFulton no longer makes the T1602 winch, it's been replaced by the F2, part # FW16000101. If you're happy with the way your old one performed, it would be good replacement. If you wanted to go up to an 1800 lb capacity, you could use the Fulton # F142306 that you referenced. Choosing a winch with capacity to spare is never a bad idea. For more information about hand winches, take a look at the help article I've linked you to.
view full answer... - Mounting Fulton F2 Fully Enclosed Trailer WinchTo use the Fulton F2 Fully Enclosed Trailer Winch # FW16000101 on your trailer would require you to drill in order to properly secure it. This winch uses what is an industry-standard mounting bolt pattern, but the good news is that its mounting bolts are adjustable along the bottom so unless your mounting bolt pattern has an unusually large spread between the mounting holes you should be able to mount it by drilling just one more hole.
view full answer...
- Winch Recommendation that Can Have Handle Installed on Either Side of itFor a winch that you can move the handle to the left side you can use # FW16000101. This winch is specifically designed to allow the handle to be installed on either side easily so it would work the best for you. The # DL14964 is not designed to have the handle installed on the other side of it so I cannot recommend it for you. The base of the F2 I recommended is 3-1/2 inches by 6-1/8 inches.
view full answer... - Can Fulton F2 Winch FW16000101 Be Installed With Only Two Bolts In Straight Line No, The Fulton F2 # FW16000101 uses the industry standard mounting pattern which is shaped like a T as you mentioned. Your best option is just drilling/modifying the mounting plate for this pattern as its used by virtually every winch, and you'll have a really hard time finding a winch that'll mount any different. If you can send me pictures and measurements of your current mounting pattern I can see if on the off chance we have something that would be a direct replacement.
view full answer... - Solution for Replacement Parts for Fulton T1802 WinchThe Fulton T1802 was discontinued quite a while ago. Unfortunately, this means that replacement parts for the winch are no longer around. The best solution is to replace it with a similar winch like the Fulton Single Speed Trailer Winch - 1,800 lbs # F142306. I have attached an installation video below for your reference.
view full answer...
- Availability of Repair Kits for Fulton WinchesIf you have Fulton 1600-lb-rated hand winch like the 1600-lb-rated F2 winch # FW16000101 you can use the linked page to see all of our Fulton repair parts. These items include individual components like F2 replacement handle # F0163309-00.
view full answer... - Replacement Boat Trailer Winch for Winch Mounted In Channel On FrameI do have plenty of options for you to choose from but finding one that matches what you have exactly is going to be next to impossible unless you were able to find the same model. Therefore, you are most likely gong to need to do a bit of modifications if you want to replace this winch. It looks like the winch mount setup you have now was a one-off for your particular winch model. The Fulton F2 Fully Enclosed Trailer Winch part # FW16000101 has a 6-3/16" long x 3-3/8" wide base but the...
view full answer...
- Fulton XLT Winch Recommendation for a 1,700 lb Boat With Carpeted Bunks and Short Winching DistanceThanks for all of the information you gave me; it makes picking out the correct Fulton XLT winch much easier. Boat-size-to-winch capacity is generally 2 to 1, so basically since your boat weighs 1,700 lbs you could get away with a winch with half of that in weight capacity. So, the 1,600 lb F2 Winch part # FW16000101 would have more than enough capacity and would be an excellent choice. I attached a review video for this winch plus an FAQ on hand winches for you to check out as well.
view full answer... - Trailer Winch With a 6 Inch or Handle For Use On a SailboatThe Fulton F2 Fully Enclosed Trailer Winch # FW16000101 has our shortest handle. This handle has 2 holes which allow you to place it at either a 6" or 7" length. The winch is rated for 1,600lbs and includes a 20' long strap.
view full answer...
Do you have a question about this Trailer Winch?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Installed by:
Jeff D
Installed by:
Shane H
Video Edited:
Jacob T
Video Edited:
Chris R
Video by:
Kathleen M
Updated by:
Laura H
Updated by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Michael H.
2/6/2019
Everything is great, very pleased