Dutton-Lainson Angle Mounting Plate for StrongArm Electric Winches

See what our Experts say about this Dutton-Lainson Accessories and Parts

• Recommended Winch Post/Stand For Boat Trailer With Roller Stop
  It sounds like you are looking for the CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide # CE31013G. This is designed for a 2 inch by 3 inch frame, so you will need to make some modifications. This is the only winch stand we currently carry. You may also be interested in the Dutton-Lainson Angle Mounting Plate for StrongArm Electric Winches # DL24059 and the CE Smith Keel Roller Assembly for 2" Wide Trailer Tongues - Galvanized Steel and Yellow TPR # CE32015G.
  view full answer...
• What is the Correctly Rated Winch for 5,000 lb Boat With 25 Degree Angle?
  Thank you for the detailed diagram. There is a way to determine the correctly rated winch, and that is to multiply the winch capacity by a factor determined by the degree of the incline. So in your case, 26 degrees, which would make the Dutton-Lainson StrongArm Electric Winch - Marine # DL25215 the option I recommend. It has a 3,000 lb capacity so you need to multiply 3,000 by 1.86 (the correct number for a 26 degree incline) and that will tell you the capacity of this winch for your...
  view full answer...
  
• Replacing the Winches on a Sea-Doo Trailer
  When replacing a winch, or winches, on a boat trailer, I always recommend one that ratchets. This way if you every loose grip, you will not need to start all over after the boat or jet ski slides back into the water. So with that being said, the TowSmart Trailer Winch - Single Speed - Ratcheting - 20' Strap - 1,500 lbs # 348776 will be the option I suggest. This is rated up to 1,500 pounds and will use the standard bolt pattern that most winches follow. However, with the way your current...
  view full answer...
  
• Mounting Plates for Dutton-Lainson StrongArm Electric Trailer Winch, # DL25200
  The Dutton-Lainson StrongArm Electric Winch, # DL25200, itself is not trailer-specific, so you could use it with any trailer provided that it is mounted properly. We have several mounting kits available depending on where you would need to mount the winch. I have included a link to the installation details for this winch for reference. You can use Dutton-Lainson Mounting Adapter Plate, # DL24055, which comes with the mounting plate and the hardware necessary for installation. Or, if needed,...
  view full answer...
• Electric Winch For Use With Boat Trailer
  The Superwinch gets wired to an ignition switch, so it isn't something that is meant for a boat trailer. The fastest 12 volt electric winch that can be powered with a 12 volt battery with a boat trailer is the Dutton-Lainson StrongArm 12-Volt DC Electric Winch with Remote # DL25220. This is rated for boats up to 9,000 lbs, pulls between 15 ft/minute (no load) and 6.3 ft/minute (full load), and can run for up to 4 minutes at a time, so it will certainly be faster than 2 feet per minute.
  view full answer...
• Recommend Electric Boat Winch for 2,866 Pound Fiberglass Boat
  To load and unload your boat that weighs around 2,866 pounds (1,300 kg), I recommend the Dutton-Lainson TW4000 StrongArm Electric Winch, part # DL25200. This nicely priced but quality electric winch can handle boats of up to 4,000 pounds (1,814 kg) and includes a wiring harness for easy installation. This winch is designed for boats and features a high-impact, weather-resistant case that will protect its internal components and brushed stainless steel front plate for superior rust resistance....
  view full answer...
• Electric Winch and Battery Charger for Boat Trailer
  So there isn't a recommended size of battery because you'll be using a 12 volt, and there isn't going to be enough difference (in terms of size) that will matter in regards to using one over the other. I also wanted to point out that batteries do not charge from your 7-way, they only get maintained, so to charge a 12 volt battery you will need a separate charger, the NOCO Genius Smart Battery Charger # 329-GENIUS2. Then for an electric winch Dutton-Lainson TW4000 StrongArm Electric Winch...
  view full answer...
• Is There a Boat Winch With a Remote
  There is not currently a boat winch with a wireless remote we offer, though the Dutton-Lainson StrongArm Electric Trailer Winch # TW4015 you referenced comes with a handheld remote and there isn't an option for a wireless remote with this particular winch. This winch can be mounted with Quick Mount Kit for StrongArm Electric Winches # DL70309 for the hardware, and can use Dutton-Lainson Angle Mounting Plate for StrongArm Electric Winches # DL24059. If you have a narrow winch stand the...
  view full answer...
• Does StrongArm Winch Need Mounting Bracket
  The Dutton-Lainson StrongArm Electric Trailer Winch - Marine - 1,500 lbs # TW4015 requires a winch stand or mounting bracket. For the StrongArm you can use the Dutton-Lainson Mounting Adapter Plate for StrongArm Electric Winches # DL24055 if you have a narrow winch stand or the Dutton-Lainson Angle Mounting Plate for StrongArm Electric Winches # DL24059 if your stand is at an angle. You will need Dutton-Lainson Quick Mount Kit for StrongArm Electric Winches # DL70309 as well. As for...
  view full answer...
  
• Winch Stand Compatible with Sled Bed Snowmobile Trailer
  The CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide # CE31013G should work on the center beam based on the measurements you gave. The additional height of the center beam won't be an issue as the width is still 2 inches. Because your trailer is 3-3/4 inches tall, this will required mounting directly to the frame instead of using u-bolts around the frame. You will also want to consider using the Dutton-Lainson Angle Mounting Plate for StrongArm Electric Winches # DL24059...
  view full answer...
  
• Dimensions of the Dutton Lainson Adapter plate part # DL24059
  I spoke to my contact at Dutton Lainson and they informed me that the Dutton Lainson Adapter plate part # DL24059 that you referenced is 7.7 inches long and 5.50 inches wide.
  view full answer...
  
• Will the Dutton-Lainson Winch Mounting Plate # DL24059 Fit a Trax Electric Winch
  I am not familiar with the Trax Electric Winches so I am not sure what their mounting plates look like. However, the Dutton-Lainson winch mounting plate # DL24059 has the top 2 holes spaced 2-1/2" apart. Then the third hole in the middle is down 3" from the center line between the top two holes. If your Trax 3500 Electric Winch plate has the same dimentions, this mounting plate will fit your winch. I attached a diagram outlining the dimensions for your convenience.
  view full answer...
  
• Will Dutton-Lainson StrongArm Winch DL25010 Work With 2023 Yamaha SX190 Jet Boat?
  They sure will! The following components you were looking at will all work perfectly with your new 2023 Yamaha SX190 Jet Boat: Strong Arm Winch # DL25010 Quick Disconnect Connectors # DL24085 Winch Cover # DL24051 With that said you shouldn't need the Mounting Bracket # DL24059 as your boat trailer should already have a standard winch mount for the winch to install.
  view full answer...
• Does Dutton-Lainson StrongArm Electric Winch Come with Mounting Bracket
  The Dutton-Lainson StrongArm Electric Winch # DL25215 doesn't come with a mounting plate but you can use part # DL24055 or # DL24059 if your current mounting bracket doesn't match with the mounting hole pattern for this winch (see attached).
  view full answer...
  
• Electric Winch Recommendation for a Boat Trailer
  There are different ways you could wire Superwinch LT3000 # SW1130220 so as not to have to have the ignition on to use the winch. However, this winch is not really designed for use with a boat trailer. I recommend something more suited for boat trailers such as the Dutton-Lainson StrongArm # DL25200. This winch features a strap rather than a wire rope so it will hold up better in marine environments. It does feature positive mechanical braking so it can hold a load. To mount it on a trailer...
  view full answer...
• Recommendation for Electric Winch To Pull 24 Foot 3300-Lb Grady White Boat on to Trailer
  Because of the length of your boat I would recommend the Dutton-Lainson StrongArm Electric Winch, part # DL25200. This DC-powered winch is designed for boats up to 4,000 lbs and includes a wiring harness for easy installation. I am including a link to the installation instructions on the winch. The Master Lock Electric Trailer Winch, part # 2953AT, you have referenced, has a maximum boat weight capacity of 5,000 lbs , but only a maximum boat length of 18 feet. I would not recommend this...
  view full answer...
• Recommended Mounting Bracket for the Dutton-Lainson DL17042
  As the Dutton-Lainson Hand Winch # DL17042 is typically mounted to a horizontal post or beam on a trailer, we will not have a bracket to mount it vertically. That being said, you may be able to adapt the Dutton-Lainson Mounting bracket # DL24059 to work for your needs, but it will require some doing. If you have the option, it will most likely be easier to drill into the vertical post to get the # DL17042 mounted securely.
  view full answer...
• Will Dutton-Lainson Angle Winch Mounting Plate Fit a 3x4 Inch Frame and a 4,000 Pound Boat
  I went out to the warehouse to measure the Dutton-Lainson Angle Mounting Plate, # DL24059. The internal width of the U-bolt is 3-1/6 inches. The length is 5 inches. As long as the post is 3 inches wide by 4 inches deep, it will fit. I also spoke with my contact at Dutton-Lainson to get the capacity of the plate. While it does not have an official weight capacity, it is designed for the StrongArm series of electric winches. The highest capacity of a StrongArm winch is 4,500 pounds, so it...
  view full answer...
• Will Dutton-Lainson StrongArm 12-Volt DC Electric Winch with Remote Work with a 2,500 lb Boat
  The Dutton-Lainson StrongArm 12-Volt DC Electric Winch with Remote # DL25220 is an excellent option for your 2,500 lb boat. The 3,000 lb weight rating is for rolling loads, but this can actually handle up to a 9,000 lb boat, and since you have rollers on your trailer it will just make it that much easier on the winch. To mount this you can either use the mounting plate # DL24059, or the mounting plate # DL24055 depending on what you already have on your setup.
  view full answer...
• Will Fulton F2 1,600 Pound Winch Fit Dutton-Lainson Winch Mounting Plate DL24059
  The Dutton-Lainson winch mounting plate # DL24059 has the top 2 holes spaced 2-1/2 inches apart on center and the third hole in the middle is down 3 inches from the center line between the 2 top holes to the center of the third hole. I measured the mounting plate on the Fulton F2 1.6K winch, # FW16000101. It has mounting slots and the top one is 2-3/4 inches wide but the big hole in the center slot is down just 2-1/4 inches from the center of the top slot. The center slot does continue...
  view full answer...
• Recommended Winch That Pulls 800 lbs up Slope
  There are both manual and electric winches which will work for you. For an electric winch, I recommend the Dutton-Lainson StrongArm Electric Winch, AC Powered - 2,700 lbs # DL24965. This winch draws 6 amps at 120 volts, has a full load speed of 7 feet per minute and a cable that is 7/32" diameter x 25' long. It can be mounted using the Mounting Adapter Plate for StrongArm Electric Winches # DL24055 or Angle Mounting Plate for StrongArm Electric Winches # DL24059 and the Quick Mount Kit...
  view full answer...
• How To Mount an Electric Boat Trailer Winch
  I have some great electric boat trailer winch options for you such as the Dutton-Lainson StrongArm Electric Winch which is what I recommend. These will need to be rated for about half the weight of the boat, so part # DL25215 for example (full selection linked below) can be used on a boat up to 6,000 lbs as it has a 3,000 lb rating. Please note, this is just a general guideline and there are other factors which you can review in the article below if needed. In regards to mounting the Dutton-Lainson...
  view full answer...
  
• Replacement Boat Trailer Winch For Boats Over 4,200LBS
  I recommend using the Dutton-Lainson StrongArm Electric Winch # DL25215. This winch is rated for 9,000lbs and utilizes a polyester strap that is less likely to damage your boat if it were to ever snap like the metal cable did on your last winch. The winch also has a backup manual crank handle for if you lose power. The Dutton-Lainson Angle Mounting Plate # DL24059 will allow you to mount the winch level on your trailer winch stand. And the Dutton-Lainson Winch Cover # DL24051 will protect...
  view full answer...
• Dutton-Lainson Angle Winch Mounting Plate for Use with Master Lock Electric Trailer Winch 2953AT
  The Master Lock Electric Trailer Winch # 2953AT includes a 3-post mounting plate intended for installation on a hitch ball, but this winch could also use the Dutton-Lainson Angle Mounting Plate # DL24059.
  view full answer...

Do you have a question about this Accessories and Part?