Bulldog Round, Weld-On Jack - Sidewind - 15" Lift - 2,000 lbs
(96 reviews)
Price: $102.95
Bulldog Round, Weld-On Jack - Sidewind - 15" Lift - 2,000 lbs
Retail:$120.16
Our Price: $102.95
You Save: $17.21
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meCustomers prefer these similar products
- All Info
- Reviews (96)
- Q & A (0)
- Videos (1)
- Photos
Bulldog Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- Weld-On
- Leveling Jacks
- Tongue Jacks
- 15 Inch Lift
- With Rectangle Foot
- Steel
- Bulldog
Footplate and 9/16" diameter pin are included with this round, swivel-mount jack. Ideal for agricultural and commercial uses. Jack has 14-1/2" retracted height and measures 12-3/16" from mounting bracket to top, excluding handle.
Features:
- Dependable jack is recognized as industry standard for agricultural and commercial applications
- ASABE compliant
- Tubular swivel design lets you swing jack up for travel, down for use
- Included pull pin holds jack in place
- Precision-fitted parts provide exceptional stability and reliability
- Sidewind handle has smooth, ergonomic design for easy cranking
- Outer tube is gray-paint finished
- Inner tube is zinc plated
- Weld-on pipe mount and standard footplate included
Specs:
- Bracket height:
- 14-1/2" Retracted
- 29-1/2" Extended
- Lift: 15"
- Clearance: 12-3/16" from mounting bracket to top of jack
- Inner tube diameter: 2"
- Outer tube diameter: 2-1/4"
- Handle radius: 5-13/16"
- Pull pin diameter: 9/16"
- Lift capacity: 2,000 lbs
- Limited 5-year warranty
151159 Bulldog Round Tubular Swivel Jack, Sidewind, 15" Travel, 2,000 lbs - SWL 151 DS
Item # BD151159
California residents: click here
Video of Bulldog Round, Weld-On Jack - Sidewind - 15" Lift - 2,000 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Bulldog Jack - Swivel Jack - BD151159
Michael: Hi there. I'm Michael with etrailer.com. Today we're taking a look at the Bulldog round weld on jack. This is a manual side wind jack. It's going to have a lift capacity of 2000 pounds and a static capacity of 3000 pounds.I'm going to give you a few measurements here to help you decide if this is going to be the right jack for you. So you can see our mounting bracket here on the back from the center of that bracket down to the bottom of our foot.
When it's retracted like it is now, it's going to be 14 and a half inches. When you have this extended all the way up, it's going to measure 29 and a half inches. Again from the center of that bracket down to the base, so that's going to give you 15 inches of lift, which should be more than enough for most of your applications.It's got the tubular swivel design, so it's going to let you mount weld your weld plate onto your trailer. And then obviously since mine's not welded on, the bracket's going to swivel, but once you have this welded on, your jack will swivel up so it can go up for travel and then down for when you need to use it. It's going to include the half inch pull pen.
You can see it's going to lock it in place so that our jack can stays where we need it to be. From the center, again of our mounting bracket to the top of our jack, it's going to be 12 and three-sixteenths of an inch. It's going to give us our clearance.One thing I really like is the side wind handle. It's going to be very smooth, very easy to crank our jack up and down. It's not going to take much effort at all.
The handle radius, it's right about six inches. And this is a very dependable jack, it's recognized as the industry standard for your agricultural and commercial applications. It's ASABE compliant.Your outer tube here is painted gray. It's got a diameter of two and nine-thirty seconds of an inch or just under two and a quarter of an inch. Your inner tube is zinc plated, so it's going to reduce the risk of rust and corrosion, and the inner tube diameter is two inches.
Here on the top you can see we've got our zerk or grease fitting to help lube the internal components, keep those in good condition, and this jack does come with a five year warranty from Bulldog. That's going to complete our look at the Bulldog round weld on jack.
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Too difficult to install
Customer Reviews
Bulldog Round, Weld-On Jack - Sidewind - 15" Lift - 2,000 lbs - BD151159
Average Customer Rating: 4.8 out of 5 stars (96 Customer Reviews)
Footplate and 9/16" diameter pin are included with this round, swivel-mount jack. Ideal for agricultural and commercial uses. Jack has 14-1/2" retracted height and measures 12-3/16" from mounting bracket to top, excluding handle.by: CG03/27/2024
Fit perfect. I was worried that the snap ring and pivot point was going to be a different diameter since I was replacing the jack on an existing welded fitting. ID/OD was the same.
Other issue was a possible interference with the top of the jack to the trailer structure. etrailer measurement was spot on as I had 1/2" clearance to play with.
It was great that all the specs were listed on your website
by: Bill 06/09/2021
Jack worked great- just as advertised. Had to make some modifications to it, since it was being used as a ramp jack on a dock, replacing a old Bulldog jack.
by: Micheal 09/06/2022
Works as expected
by: Jonathan09/16/2022
by: John 07/12/2023
by: Ben 07/06/2023
by: Kensington05/13/2024
by: Bob 12/26/2022
by: Michael 07/16/2022
by: Julian 02/10/2024
I literally ordered this 48 hours ago. Incredibly fast delivery! This jack is heavy duty and will be mounted on my Genie hydraulic with a dual caster wheel assembly.
by: Dale E.05/27/2022
The Bulldog swivel jack bolted bolted up easily and lifts the tongue of my small cargo trailer easily. The top of the jack’s tube did not come with a cap, so the greased gears are exposed to the elements (and my thumb, which I immediately stuck in the grease.) Otherwise, this would be a 5-star review.
by: Mike A11/25/2020
Very nice sidewind jack. Much better quality than the jack stand that came with the trailer. I needed this with a wheel to help with moving my DropTail motorcycle trailer. Works great. The jack stand wheel etrailer.com recommended to go with it went right on and fits well.
by: Thomas10/06/2021
Best thing I did when I bought this item for my trailer it keeps the trailer from tilling back no more looking for lumber or cinder blocks to prevent the trailer from tilling
They have been exposed to all kind of weather and they show no signs of rust or damage they work great a good quality piece of equipment
by: Greg09/06/2022
This Jack does not come with the mounting hardware as it states on the bottom of it’s page. When one calls up to find out the correct mounting hardware / bracket because the page doesn’t tell you that. It’s a different brand. Oh yeah, you will have to call and place a third order and pay more shipping because they don’t include the pivot bolt.
by: 04/16/2021
Fit and works great. No more wobbly trailer jack.
by: Dan 07/26/2022
Works flawlessly. I actually use one one my trailer tongue and one for my home built 4’ bedroom slide out. Drain holes after a heavy rain would be a nice addition but a simple upside tip works just fine.
by: Danny05/09/2019
I purchased a trailer in March 2019 and this is the jack that "should have been installed" from the manufacture. Extremely happy with the jack and the service from etrailer. Easy transaction, timely delivery and exactly what was expected. thank you etrailer.
by: Chad03/19/2022
Really nice solid jack. Just understand unlike some of the pictures on the ad it does not come with the brackets and hardware to bolt it on the trailer. You have to order those separately. It does specify that on the ad. It should show the brackets and hardware on the ad as other things customers purchased. That would be helpful. I had to do too much “digging” to find the bracket and bolts that work with it. Otherwise I would’ve gave it five stars.
by: TJ M.05/22/2019
I can't exactly speak for the product itself, as I ordered it for another person who is using it as an equipment jack. However, etrailer.com provided excellent service throughout the order process. Finding and purchasing was simple, their staff kept on top of tracking, and when the order was delayed they offered comparable alternatives with quicker availability.
by: John F.09/08/2016
Trailer jacks work well one year in; I'm counting on them to last many years into future.
Office staff has been very responsive and helpful. Great job!
by: William 04/06/2021
The trailer jack and service was great. Unfortunately the trailer was burnt in the Oregon Almeda fire and everything had to be salvaged.
by: Gary C11/22/2017
Purchased a Drop-Tail Trailer without a Trailer Jack. etrailer recommended the products, mailed them FREE & got everytrhing in TWO DAYS. Installed without any issues. Highly Recommend!!
by: Chris03/29/2022
Exactly what I needed for my off-road trailer. I really like having the zirc fitting for maintaining my jack.
by: Dean B.03/12/2014
Jack was as advertised. Photos on website were very helpful in selecting this product. Customer service was great! Prompt shipping.
25
96
Show More Reviews
See what our Experts say about this Bulldog Trailer Jack
- Can Wheel Fit on Bulldog 2K Sidewind Frame-Mounted JackHi! Some snap-ring jacks have a removable foot but if yours is the same model as the Bulldog Round, Snap-Ring Swivel Jack # BD151159 then the jack foot cannot be removed and we'll have to look at another solution. Since this is the case I recommend replacing your jack with the Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels # F27CR. This is rated for 1,500 lbs, has a bolt-on installation, and comes with the dual wheels so it's easier to maneuver the trailer tongue. Attached is a...
view full answer... - Does The Snap Ring Mounting Bracket Have To Be Changed When Replacing Bulldog Trailer JackThe old Bulldog Snap Ring Swivel Trailer Jack uses the same snap-ring bracket as the new Bulldog Snap Ring Swivel Trailer Jack like part # BD151159 so you can replace the jack without replacing the welded-on mounting bracket. They both use the same 2-1/2" snap ring bracket. I have also attached a list for you below with all of the other Bulldog Snap Ring Swivel Trailer Jacks that will work as well.
view full answer...
- Can the Bulldog Round, Weld-On Jack's Foot be Swapped with a WheelWe do have jacks that have a wheel instead of a foot. However, the Bulldog Round, part # BD151159, does not have the capability to swap the foot for a wheel. In fact, none of our jacks with drop-down feet can be swapped for wheels. Instead, you would have to use one that already has a wheel attached. Of course, those with the wheel have lower weight capacities and make use of a hand crank rather than electricity like the Bulldog Round. If that's the route you would like to take, I recommend...
view full answer...
Do you have a question about this Trailer Jack?
Info for this part was:
Edited by:
Lindsey S
Updated by:
Wilson B
Written by:
Alexander C
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina B.
9/30/2022
I see that you gave your experience with etrailer 1 star. If you give me more information about why you are disappointed in us, I will be happy to assist you.