Bulldog Round, Pipe-Mount Swivel Jack - Topwind - 10" Lift - 5,000 lbs

See what our Experts say about this Bulldog Trailer Jack

• Is 5,000 lb Bulldog Topwind Jack Stronger or Easier to Use than Bulldog Sidewind Jack
  The sidewind and top wind 5,000 lb Bulldog pipe-mounted trailer jacks you asked about have the steel construction with a zinc-plated inner tube and 5,000 lb capacity, so they are equal in strength. We also have a similar version by Pro Series. They also have the same ease in regard to cranking, though this can be based on personal preference. Some people would rather crank vertically (sidewind) as opposed to horizontally (topwind) and clearance is also another consideration if there's...
  view full answer...
• What is the Outer Diameter of the Mounting Bracket for the Bulldog Pipe Mount Swivel Jack?
  The mounting bracket has an inner tube diameter of 2"and an outer tube diameter of 2-1/4". I recommend the Bulldog Round, Pipe-Mount Swivel Jack - Topwind - 10" Lift - 5,000 lbs item # BD178101. This will mount directly to that short section of tubing you were referring to and not to the actual frame of your trailer.
  view full answer...
• Recommended Footplate For Bulldog 5,000 Lb Jack With 2-1/4 Inch Diameter Outer Tube
  The Bulldog Detachable Footplate with Pin, part # BD018098, you referenced is designed for a 2,000 to 5,000 lb jacks with the inner 2 inch diameter tubing. The diameter of the outer tube on a 5,000 lb Bulldog jack like part # BD178101 is 2-1/4 inches, but the inside diameter of the tube where the footplate inserts should be 2 inches. The outside diameter of the footplate tube measures 2 inches. This # BD018098 footplate should work well for your jack with the 2-1/4 inch outside diameter...
  view full answer...
  
• Trailer Jack Dimensions for the Bulldog Round Pipe Mount Swivel Jack
  Hey Kelly, so clearance as we define it, is going to be the distance from the mounting bracket to the top of the jack tube excluding the handle. Both of the extended and retracted measurements are going to be taken from the bottom of the footplate to the top of the jack tube excluding the handle. So the Bulldog # BD178101 measures 11 1/4" retracted, and 21 1/4" extended.
  view full answer...
• Dimensions of the Pipe Mount for the Bulldog Trailer Jack with 5,000 lb Capacity
  I went out into our warehouse and measured the inner and outer diameter of the mounting bracket that is on the Bulldog Round, Pipe-Mount Swivel Jack # BD178101 and found that the outer diameter measures 2 inches and the inner diameter measures 1-1/2 inches.
  view full answer...
• 5,000 lb Bulldog A-Frame Jack With Short Retracted Height
  I checked and although there is not a bushing for the Bulldog Swivel Jack - Topwind # BD178101, we do have a 5,000 lb Bulldog A-frame jack with a short retracted height that is going to be exactly what you need. The Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs # TJA-5000S-B has a 23-3/8" retracted height and a 15" lift. You can also add a removable foot plate # JF-99 or a drop leg # JF-1005H-Z. This short retracted height should definitely resolve the issue you...
  view full answer...
  
• Can Bulldog Pipe Mount Jack BD178101 Replace Snap Ring Jack Without Replacing Bracket
  Hi Mark; unfortunately that would not be possible. To use the Bulldog Round, Pipe-Mount Swivel Jack # BD178101 you would have to weld on the pip mount that comes with the jack. It wouldn't work with the snap ring mount you currently have. For a similar option to replace you snap-ring jack use the Bulldog Round, Snap-Ring Swivel Jack # BD171401.
  view full answer...

Do you have a question about this Trailer Jack?