Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings
(202 reviews)
Price: $71.11
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings
Item # 8-91-05UC1
Our Price: $71.11
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (202)
- Q & A (0)
- Photos
Dexter Trailer Hubs and Drums - 8-91-05UC1
- 4 on 4 Inch
- For 2000 lbs Axles
- Hub
- 10 Inch Wheel
- 12 Inch Wheel
- Standard
- L44649
- L44649
- Dexter
Hub is designed for use on trailer idler axles. Fits 2,000-lb axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
Features:
- Trailer hub assembly fits idler axles
- Bearings, races, seal, grease cap, wheel bolts, and lug nuts are included
- Sturdy iron construction
- Hub and drum are made in the USA
Specs:
- Application: 2,000-lb trailer axles with BTR spindles
- Wheel size: 10" to 12"
- Hub flange diameter: 5-1/2"
- Bolt pattern: 4 on 4"
- Grease cap flange diameter: 1.986"
- Wheel bolt diameter: 1/2"
- Weight capacity: 1,000 lbs
Note: Some axles rated at 2,000 lbs require a different seal and bearings. Be sure that the bearings in the hub being replaced have L44649 stamped on them.
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: L44649 (1.063" inner diameter)
- Outer bearing: L44649 (1.063" inner diameter)
- Races (included)
- Inner race: L44610
- Outer race: L44610
- Grease seal (included): 10-9
- Inner diameter: 1.500"
- Outer diameter: 1.987"
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
K08-091-91 Dexter Trailer Idler Hub Assembly for 2K Axle with Hardware - 4 on 4 - L44649 Bearings
Replaces 8-91-05UC1
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- Did not fit
Customer Reviews
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - 8-91-05UC1
Average Customer Rating: 4.7 out of 5 stars (202 Customer Reviews)
Hub is designed for use on trailer idler axles. Fits 2,000-lb axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.by: Vincent 07/25/2023
Hi, coming from a person who has never installed a hub in my life, here's my feedback:
1. The printed instructions are atrocious. Keep it simple. I was more confused after I read the instructions. Make the instructions so simple that an 8th grader could follow them.
2. Make a video on putting together and installing a hub. Put the web address to the video in the printed instructions.
3. Include a cotter pin for the castle nut as a part of the kit. Luckily for me, I had a spare, but I didn't know that it didn't include it.
by: Larry 10/07/2013
Purchase a pair of hubs and leaf springs plus assorted hardware for an old trailer restoration. The pricing was great and the quality and shipping were equally as good. The trailer is a 1999 Haulin which seen it's better days. Thanks to Etrailer, I was able to order everything I needed at one time.
by: Joe R03/24/2014
I've attached some pics of the smoker I'm building using the hubs and spindles I purchased from you. Thanks for the quick shipping. Hubs and spindles fit perfect.
by: Alain P.09/29/2015
The hub seemed to be of very good quality. It shipped out and I received it very quickly. I have only one issue and that was the grease cap seemed a tad small and was extremely difficult to put on without damaging, but in all fairness that could be my lack of experience installing them rather than a product issue. before an after pictures attached
by: Michael 02/04/2024
Very good service and fast delivery
by: John M08/07/2013
The staff at e-trailer was very helpful and informative regarding their product. I learned several things about trailer equipment, in general from the staff, as well. I especially appreciated their efforts to assist me in solving a problem that arose several weeks after I had received the tires and wheels that I had ordered. The fix was to replace the existing hubs (4.5 inches) with new ones that were the standard 4.0 inch hubs.
by: Alex V06/22/2012
I have a small 1200 lb Harbor Freight Tool trailer. The original bearings blew out and I had to replace the bearings, seal and hub. Went to our local Colorado Springs bearing supply house. I bought the hub, seal, bearings and cap for less that what they charged for one bearing, bought tires too - for less and better quality than what Discount Tire charged. Will be coming back
Jerry M.
6/2/2015
Hello, I also have a Harbor Freight trailer 1200 lb trailer. my hubs do not turn true. did you change just the bearing or the hubs too? I want to make sure these hubs fit this trailer?Jerry
Alex
6/5/2015
Jerry M, In 2012 I replaced the spindle, bearings and tires on my Harbor Freight trailer. I had a local welder put the new spindles on the axle. Since this time, the trailer has remained true, no bearing issues, and no tire wear issues. Approx 2500 miles since then. Very happy with my decision to use eTrailer. Just wish they used FedEx and not UPS
by: Bill C.09/23/2014
My old trailer hubs were made of cast iron and the cup portion was machined and impossible to keep smooth. The new hubs were machined for the cups and were already installed. Next time when I need to repack the hubs and inspect the bearings I will have the option of putting in new cups and cones making them new allover.
Thanks for a great product at a great price!!
Bill
Bill C.
9/23/2015
With almost 1500 miles on the trailer I have had no issues with the hubs or bearings. I did learn to keep a log of the miles on my trailer so I can keep track when to do maintenance on the bearings.
by: Tom02/10/2014
Actually using this spindle and hub for a wind turbine. I have bought from etrailer over the years. Always satisfied. Good service and support. Good quality products like this Dexter spindle and hub. Quick delivery. Will come back!!!
Tom
2/10/2015
Working well. I am very pleased with the Dexter products. I have used enough axles, hubs, bearings over the years to know it is worth it to seek out quality name brand components like Dexter.
by: p winston11/05/2014
Received item very quickly. Noticed rust on the hub inner raceway. Contacted etrailer and a new part was sent immediately. Issued was handled as well as possible. I would purchase from etrailer again.
P W.
11/13/2015
All terrific. Thanks for asking.
by: Eddie K. Hardy Jr06/11/2014
Everything was delivered worked out great Very very pleased with the service experience working with y'all Have already told to other people about you all
by: Ron B03/07/2017
I recently purchased a set of hubs and bearings for my Jon Boat trailer. I purchased 4 on 4 hubs to put 4.80 X 12" tires on the trailer. Delivery was very fast. I received the hubs in two days.
However, the hubs and bearings I purchased would not fit the trailer axle.
I contacted etrailer.com and explained that the internal diameter of the bearings was much too small. The ID was 1" and the spindle of the axle was 1.25". They checked their inventory and could not find bearings with 1.25" ID. They agreed to allow me to return the hubs and bearings. However, after considerable looking I found that the axle is non-standard for this type of trailer and no one has hubs (4 on 4 for 4.80 X 12" tires) to fit the axle. I ended up purchasing a proper axle and installed the hubs I had purchased from etrailer.com. The people at etrailer.com were very considerate and helpful. I recommend them highly.
by: Don03/28/2019
The hubs and bearing fit my seadoo trailer great. The reason for one star down is that the grease seals were the wrong diameter to seal on my axle and seeing as how this was a Saturday and I was 125 miles from home (trying to get this trailer road ready) I had to buy seals from a local auto parts store at $8.00 each (prices suck when your out in the country without many choices).
Overall very pleased with the service and products.
I would definitely visit etrailer again for my trailer needs.
by: Hugo04/23/2020
Parts fit perfectly and are made of good material, customer service with Nicole T was great . She was able to get me the right parts and super professional on helping me getting the right parts . Thank you
Hugo
4/24/2021
So far so good , working well . I lube the hubs once a year with marine grade lube
by: Richar H.05/15/2014
The actual hub is of exceptional quality as it is a cast hub and is a giant improvement over the tubular steel w/welded on lug plate I took off. Was not impressed with the fact that the MFG did not pack these in a cardboard box and just wrapped all the parts around the hub with tape, paint job on the hub was not the greatest but did not matter to me as I repainted it a different color to compliment my new wheels, the dust cap is flimsy and easy to dent unless you cut a notch the width of a hacksaw blade 1/2 way to the stop ring but again did not matter to me for anything but to keep the paint off the bearing race as I used my old bearing buddies. The hub is of automotive quality and I give it a 10 for quality, cost, fit and my hat's off to the service at Etrailer.
by: Paul F. 08/09/2015
Ordering was fast and easy, shipping was quick. The Dexter hub kits were a good replacement for the boat trailer I put them on but the grease seals included in the hub kit were not the size I needed. I knew it when ordering so I just ordered the correct size seals at that time.
I've ordered from etrailer several times......never had an issue. Good customer service and support.
by: Ken04/27/2019
My trailer had different sized hub which had me confused when trying to replace the bearings. The new hub fit and worked great and now it matches the other side.
by: John R.06/25/2013
I am converting an old Coleman camper into a one room toy haler (model airplanes). The bearings in the wheels were shot. This pair of new hubs and bearings were cheaper then I could get the old hubs rebuilt locally. Also the old hubs had break drums I no longer needed. So the new hubs were lighter. Hubs look great and worked great. The new dust covers were not so great but my old caps worked. Shipping was unbelievable fast. All good stuff.
by: Eric E.10/23/2016
Got these hubs last year. Hubs are still going strong and I don't have to worry about their dependability. Pulled the trailer up the mountain last Saturday to cut wood and back home without ANY worries. Excellent hubs!
Eric
by: Wayne M.06/02/2011
I needed to replace the hubs on my jon boat trailer. Etrailer had the exact hubs I needed, in stock. The description in their shopping cart made it easy to order the right part. They shipped promptly and I received the order within a few days. The hubs were well packed. Their quality is first rate. They even included bearings, seals, races which came installed in the hubs saving me some time (thank you!), and lug nuts at a price that was less than the bearings and seals alone were going to cost me at a local auto supply store. A diagram on their web site showed me how to install the innards and I installed both hubs on my trailer in a little over an hour. Thanks again, Etrailer.
by: Bill F.01/30/2012
Great response time and follow-up. I ordered this hub assembly on a Friday and received it on Tuesday. Everything needed was in the package to replace a damaged hub and bearings on a small trailer a friend and I are rebuilding. I did find damage to one of the bearings when I received it. I called etrailer, spoke to Ashley and another bearing was shipped that day. If I need any other trailer parts etrailer will get my business.
by: Alain P.02/25/2016
Many of my old garden tractors came with 8" rims and sealed wheel bearings, these bearings and small tires on a 1000 lb machine made steering hard and wore out bearings. I am in the process of converting many of them to 4 bolt hubs like this cast iron Dexter hub. They make steering with two fingers possible, great product for a upgrade on an old garden tractor, especially if you are going to add a loader or front plow
by: Andrew 08/27/2022
Perfect replacement for my old ones with bad bearings. Could have replaced bearings and races, but for this price it wasn’t worth it.
by: Pappy02/15/2017
I'm modifying an old boat trailer to transport my HD Fat Boy. The price of e-Trailer's wheel hubs was so reasonable, I opted to replace my old ones. I was in no real hurry to receive them but the new hubs arrived promptly anyway and they were just as represented in the catalog. Upon installation, I sensed the need for a special washer between the outer bearing and the hub nut. Calling the 800 number, I received a prompt and detailed explanation. I couldn't be more pleased, because these folks really focus on customer satisfaction. Pap.
by: Steve O03/22/2017
Arrived quickly, and seems to be well made for the price. Bearings are made in China.
Steve O.
3/22/2018
It’s still performing as it should.
25
202
Show More Reviews
See what our Experts say about this Dexter Trailer Hubs and Drums
- Does a Trailer Wheel Center Hole and a Hub Bore have to MatchThe expert answer you have referenced is correct. A wheel that secures to the hub using bolts instead of lug nuts actually centers on the hub so the pilot hole of the wheel has to be exact. If it is too large the wheel can easily be off center and lead to all sorts of problems. Hub # 8-91-05UC1 has a center bore outer diameter of approximately 2.4375 inches; very close to 2.5 inches but not quite. If you use this hub and the wheels you are using have a pilot hole that is larger, it will...
view full answer... - Hub, Rim and Spindle Recommendation for 13 inch Wheel with 4 on 4 inch Bolt PatternFor a hub with a 4 on 4 inch bolt pattern that can fit 13 inch wheels with the pilot diameter of 2.5 inches the part # 8-91-05UC1 would be what you would need. For a white rim to fit this the part # AM20222DX would work well. Then for a spindle for the hub to fit on you would want the part # TRU44FR.
view full answer... - Replacement Hubs for 2000 Dutchman Voyager Pop-Up CamperTo select proper new hubs for your trailer you will need to confirm a few things: bolt pattern (see linked article), inner and outer bearing numbers (see linked photo) and axle weight rating (which should be indicated on a sticker or plate on the axle). You can then use the link provided to see our main page for hubs. Filters in the left margin will allow you to narrow the results based on your bearings, bolt pattern, wheel size and weight requirement, as well as whether or not you need...
view full answer...
- What is the Replacement Wheel Hub Needed on the Axle of a 1996 Jayco 1207 Popup TrailerWe have a hub that will fit your 1996 Jayco popup trailer. The Dexter Trailer Hub assembly, # 8-91-05UC1-EZ, that you referenced will work on your trailer axle. This hub uses the # L44649 bearings and has a 4 bolt lugs. Measuring the current hubs bolt pattern will tell you for sure if this hub will work for you. I have attached an article that will explain how to find what your wheel bolt pattern is on your current hub. If you do not have grease zerks at the end your axle spindles, then...
view full answer... - Replacement Hub Recommendation For 4 Bolt Spindle With L44649 BearingI have attached a link to our product page that lists the hubs we offer that have a 4 bolt design.You will need to check both the inner and outer bearing numbers to see if they are both the same. For a 2,000 lb axle I recommend part # 8-91-05UC1. This hub has a 4 on 4 bolt pattern, and includes lug nuts, inner and outer bearings, part # L44649, and races, part # L44610, grease cap and grease seal, part # 10-9. The 5-1/2 inch diameter hub flange is designed to use with 8 inch to 12 inch...
view full answer... - Replacement Bearings and Seal for EZ Lube Hubs on #9 Torflex Axle Based on my research the Torflex #9 axle (2,000-2,200 pound capacity) features spindles that use the # L44649 inner and outer bearing. This bearing has an inner diameter of 1.063 inches. The grease seal used on the spindle has an inner diameter of 1.50 inches like the TruRyde # 10-9. For a complete kit that includes the bearings, grease seal, cotter pin, and EZ Lube spindle washer you can use part # BK1-150.
view full answer... - Is there a Torque Spec for Installation of Castle Nut on 2,000 lb Axle?The castle nuts do not have a torque spec. Bearings and races are fit to the spindle precisely and will have minimal movement to the washer and castle nut which will simply be tightened and held in place with the cotter pin # 165649. We recommend tightening until the nut stops without added force and then backing it off one notch to fit the castle nut. The Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings # 8-91-05UC1 is a fit for 1.063 inch spindles and...
view full answer... - Replacement Wheel Stud Recommendation for a Trailer Hub that Takes Bearings L44643Most likely the studs you would need are the part # RG03-060 which is what the hub part # 8-91-05UC1 takes that has the two bearing numbers you listed. Since I don't know what hub you have for certain though it's hard to be totally sure. The hub I referenced is a very popular option though.
view full answer... - Comparison of Dexter and etrailer.com Idler Hubs for 2,000 Pound AxlesThe two trailer hubs # AKIHUB-440-2-2K from etrailer and # 8-91-05UC1 from Dexter are basically the same product from two different manufacturers. They're both hubs for 2,000 pounds axles with 4 on 4 bolt patterns and use the same # L44649 inner and outer bearings. The Dexter hub does have a little higher weight capacity at 1,250 pounds vs. the 1,000 pounds of the etrailer hub. However, the price difference is mainly determined from our relationships with the manufacturers and therefore...
view full answer... - Replacement Dexter Hub for 8-91A HubIf the hub that was on your trailer axle previously had 8-91A stamped on the back of it your spindle should require inner and outer bearings of # L44649 like you used. The part # 8-91-05UC1 SHOULD be an exact replacement. However we need to double check your grease seal measurement. Double check to make sure you don't have a 1.5 inner diameter seal with outer diameter of 1.9. You can also measure the spindle where the seal rides as well. The seal dimensions you mentioned are not ones...
view full answer... - Replacement Wheel Bearings and Seal for Dexter Hub 8-91The inner and outer bearing that your Dexter Hub part # 8-91-05UC1 has is # L44649. Then for a seal you would want the part # 10-9.
view full answer... - Trailer Hub Compatible with Caliper Measurement for Camping Trailer AxleBased on your photo it does appear you have the BTR spindle that takes the 1.063 inch inner bearings. The fact that it isn't a digital caliper with the precision of that thousandth does leave slight ambiguity but I am still confident you will want the Dexter Trailer Idler Hub Assembly # 8-91-05UC1. You will not need the # 8-91-05UC1-EZ you asked about because you don't have the grease zerk in your spindles. To confirm fit, I recommend putting your caliper on the grease seal location...
view full answer...
- How To Determine What Hub Assembly is Needed With a Bearing Inner Diameter of 3/4 InchThe Dexter Trailer Hub Assembly - 4 on 4, part # 8-91-05UC1, uses the # L44649 bearing as the inner and outer bearings. The inner diameter of the bearing is 1.063 inches (1-1/16). The only bearing I have that has a 3/4 inch inner diameter is the Redline Bearing, part # LM11949, which is used as an outer bearing on the Agricultural Hub Assembly - 4 on 5, part # AH15450ECOMP. This is a hub that has a 4 on 5 inch bolt pattern and is used for low speed (less than 20 mph) agricultural applications....
view full answer... - Replacement Hub Assembly For Utility TrailerWe do have the parts you need for your trailer. I recommend the trailer hub assembly, part # 8-91-05UC1. This is a hub assembly that comes with bearings, races, seals, and the grease cap. The bearings included with the assembly will work fine. The seals in the assembly will not work for your spindles as the inner diameter is too large, but we do have a solution. These are 4 on 4 hubs and include the bolts on the hub and also include the lug nuts. You will need to order part # RG06-010...
view full answer... - Replacement Bearings and Seals for a Dexter Hub with 8-91A Stamped on BackIf the spindle that was on your trailer axle previously had 8-91A stamped on the back of it your spindle should require inner and outer bearings of # L44649 like you used. The part # 8-91-05UC1 that you referenced would be an exact replacement. Grease seal # 10-9 is the correct replacement seal also. It has an inner diameter of 1.5 inch and an outer diameter of 1.987. The double lip version of this that is sold in pairs is our part # RG06-020. # 10-9 is sold individually. Double lip...
view full answer... - Recommended Replacement Hub for Dexter 8-91AI reached out to my contact at Dexter regarding the numbers you gave. They couldn't match anything and suggested that you most likely have a 8-91A, which is a 4 on 4 bolt pattern. That is a very basic trailer hub assembly and the replacement part is # 8-91-05UC1. This assembly comes with the L44643 bearings, the grease seal, the lugs and the grease cap. I'd suggest a bearing packer like # PTW1218 and the Industrial Strength Grease # L11390.
view full answer... - Replacement For 08-091-05 Trailer HubWe do not have any hub with that specific number, but what you may need is the the Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings # 8-91-05UC1. This doesn't have the "4" at the beginning, but will work so long as your hub has a 4 on 4" bolt pattern, uses inner and outer bearing L44649 (1.063" inner diameter) and grease seal 10-9 (1.500" inner diameter). It does come with the bearings, races and seal. Otherwise, to determine the correct replacement hub...
view full answer...
- Replacement Hub and Bearing Buddys for a 2K Axle on a Boat TrailerSince these idler hubs will be used for a boat trailer I highly recommend going with the etrailer.com Trailer Idler Hub Assembly # AKIHUB-440-2-G-2K over the Dexter Trailer Idler Hub Assembly # 8-91-05UC1 because the eatrialer.com option has a galvanized finish that will protect it better than the powder coat finish on the Dexter option. Please note that the seals which come with these have an inner diameter of 1.500" so you will need to use part # 34823 for a grease seal instead as it...
view full answer... - Grease Cap Recommendation for Trailer Hub part # 34822BXThe Grease Cap # F001518 is a confirmed fit for the hub part # 8-91-05UC1 that you have.
view full answer... - Replacement Trailer Idler Hub For Dexter 8-91A Hub With 4 on 4" Lug PatternYou will need either the Dexter Trailer Idler Hub Assembly # 8-91-05UC1 that fits standard axles, or the Dexter E-Z Lube Trailer Idler Hub Assembly # 8-91-05UC1-EZ that fits axles that have the E-Z lube grease. Both hubs will include all new bearings, races, lug nuts, a grease cap and a grease seal. I recommend using LubriMatic LMX Industrial Strength Grease # L11390 to fill the bearings and the hubs thanks to its superior wear resistance in both hot and cold climates.
view full answer... - Replacement for Dexter 8-91A HubI did some research and there is no direct replacement for your hub due to how old it is. So in order to find the correct replacement, you will need to know the bearing numbers of your current hub because the information you gave is irrelevant. If you are unable to find them, you would need to use a digital caliper such as # PTW80157 and measure your spindle to the thousandths of an inch where the bearings ride. You can use the photo I've attached to see exactly where you need to measure. There...
view full answer...
- Looking for Galvanized 4 Lug Trailer Hub Compatible w/ # T20BTR-6048 Dexter Trailer AxleThe # T20BTR-6048 Dexter 2K axle you referred to is compatible with a L44649 inner and outer wheel bearing. The # 8-91-05UC1 hub assembly has a 4-on-4 bolt pattern and uses the L44649 bearings. A galvanized version isn't offered, but there's one available in a 5 lug on 4-1/2 bolt circle, part # 8-259-50UC1 for 8-12 inch wheels or # 8-258-50UC1 for 13-15 inch wheels. Keep in mind, if you switched to the 5 lug hub, you'd need to swap out your existing wheels for wheels with a 5-on-4-1/2 inch...
view full answer... - Needing Dexter Hub # 8-91AThe hub that you are looking for comes in the Trailer Hub Assembly # 8-91-05UC1 on our site. For the E-Z Lube version you would instead want the Trailer Hub Assembly # 8-91-05UC1-EZ. I contacted Dexter Axle and confirmed that these were the correct hubs for the 8-91A hub you are looking to purchase.
view full answer... - Replacment Trailer Hub Recommendation for Hub Marked 8-259We do carry the Dexter hub part # 8-259-5UC1-EZ which matches the first part of the part number you mentioned. This is a 5 lug hub though so for a 4 lug hub version of the same hub you would want the # 8-91-05UC1.
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Installed by:
Patrick B
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Carrie F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
John M.
2/20/2015
I am still relying and using those products purchased from e-trailer.