Looking for Galvanized 4 Lug Trailer Hub Compatible w/ # T20BTR-6048 Dexter Trailer Axle
Question:
What 4 on 4 hub kit fits the T20B TR 6048 axle? Is there a galvanized one?
asked by: Chris M
Expert Reply:
The # T20BTR-6048 Dexter 2K axle you referred to is compatible with a L44649 inner and outer wheel bearing. The # 8-91-05UC1 hub assembly has a 4-on-4 bolt pattern and uses the L44649 bearings. A galvanized version isn't offered, but there's one available in a 5 lug on 4-1/2 bolt circle, part # 8-259-50UC1 for 8-12 inch wheels or # 8-258-50UC1 for 13-15 inch wheels. Keep in mind, if you switched to the 5 lug hub, you'd need to swap out your existing wheels for wheels with a 5-on-4-1/2 inch bolt pattern.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 9 Inch Wheel
- 10 Inch Wheel
- 11 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Dexter Trailer Axle Beam with Standard Spindles - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- 48 Inch Long
- 60 Inch Long
- No Drop or Lift
- Dexter
more information >
Product Page this Question was Asked From
Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Galvanized Steel
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Disc Brakes for 2013 EZ Loader Adjustable Boat Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Can a Hub with Outer Bearing 15123 and LM67048 Both Fit Same Spindle
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: How to Pick Out Replacement Hub for UFP Hub Marked H-1377 A4E
- Q&A: Are the Safety Struts for the etrailer Cargo Carrier Included
- Q&A: Difference Between an Idler Hub and a Hub/Drum
- Q&A: Preferred Method For Bolting On A Demco Hydraulic Brake Actuator DM72VR
- Q&A: Does The Demco Actuator DM72VR Require Two Or Three Bolts For Installation?
- Article: Where to Position the Trailer Axle?
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: What Is A Leaf Spring? (Everything You Need to Know About Trailer Leaf Suspension)
- Article: What Exactly is Tongue Weight?