Replacement Trailer Idler Hub For Dexter 8-91A Hub With 4 on 4" Lug Pattern
Question:
I need to replace the hubs on my small camper pop up. When I took them off they are 4 lug and that have a marking on them that says 8-91A made by dexter. Do you have a replacement for these?
asked by: Nathan R
Expert Reply:
You will need either the Dexter Trailer Idler Hub Assembly # 8-91-05UC1 that fits standard axles, or the Dexter E-Z Lube Trailer Idler Hub Assembly # 8-91-05UC1-EZ that fits axles that have the E-Z lube grease. Both hubs will include all new bearings, races, lug nuts, a grease cap and a grease seal.
I recommend using LubriMatic LMX Industrial Strength Grease # L11390 to fill the bearings and the hubs thanks to its superior wear resistance in both hot and cold climates.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 4 on 4 - L44649 Bearings
- Trailer Hubs and Drums
- Hub
- EZ Lube
- L44649
- L44649
- For 2000 lbs Axles
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Standard Lithium Grease
- Lithium Complex
- 14 oz
- LubriMatic
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Replacement Dexter Hub for 8-91A Hub
- Q&A: Solution for Replacement Hubs on Northern Tool Ultra-Tow 49803 Aluminum Trailer
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Bearings and Seals for a Dexter Hub with 8-91A Stamped on Back
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: What is Correct Replacement Grease Seal for Bearing # L44649
- Q&A: Bearing Buddy Recommendation for Dexter Hub 8-248 3,500 lb Axle
- Q&A: Replacement Hub and Spindle for Dexter 69-46 Axle
- Article: Trailer Tire Sizing
- Article: How to Measure a Trailer Axle
- Article: How to Bleed Your Trailer Surge Brakes
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Determine Tire/Wheel Diameter