Replacement For 08-091-05 Trailer Hub
Question:
I need a hub and bearings The number on the hub is 408-091-05 Do you sell those?
asked by: Gene H
Expert Reply:
We do not have any hub with that specific number, but what you may need is the the Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings # 8-91-05UC1.
This doesn't have the "4" at the beginning, but will work so long as your hub has a 4 on 4" bolt pattern, uses inner and outer bearing L44649 (1.063" inner diameter) and grease seal 10-9 (1.500" inner diameter). It does come with the bearings, races and seal.
Otherwise, to determine the correct replacement hub you will need to know what bearings your current hub has. You will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them.
If you are unable to find them, you need to use digital caliper and measure your spindle to the thousandths of an inch where the bearings and grease seal ride. You can use the photo I've attached to see exactly where you need to measure. Additionally, you need to know your hub's wheel bolt pattern; if you do not know what it is I have added a help article which details how you can find it.
I have also added a link below to our entire selection of hubs for you to come back to if # 8-91-05UC1 is not correct for you.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Dexter Hub for 8-91A Hub
- Q&A: Solution for Replacement Hubs on Northern Tool Ultra-Tow 49803 Aluminum Trailer
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Most Popular Wheel Bearings
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Replacement Bearings and Seals for a Dexter Hub with 8-91A Stamped on Back
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: How to Tell if a Trailer Spindle is Damaged or Needs to be Replaced
- Q&A: What is Correct Replacement Grease Seal for Bearing # L44649
- Q&A: Replacement for Dexter Mobile Home Axle Grease Seal 10-41
- Article: How to Measure a Trailer Axle
- Article: Trailer Tire Sizing
- Article: Trailer Lighting Requirements
- Article: How to Bleed Your Trailer Surge Brakes