Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Hub is designed for use on trailer idler axles. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles with BT8 spindles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and lug nuts included.
Features:
Specs:
The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.9 out of 5 stars (65 Customer Reviews)
Hub is designed for use on trailer idler axles. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles with BT8 spindles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and lug nuts included.
They are working great may get another set for my other boat or utility trailer. Cheaper that pulling them and replacing brearings and seals or even just greasing them.
Etrailer is the best. They've got your back!!
The two new trailer idler hubs fit perfectly with the trailer spindles. The whole process of removing the old ones and installing the new ones was relatively easy without any difficulties at all. It also appears that the quality and the engineering designs of the new hubs are much better than my old ones. These are great products with good prices. A couple of pictures are attached for more info. Thank you...
It was just what I ordered, Came in real quick, Will order more from them!
Excellent hub but it does not fit old Harbor Freight 1,195 Lb Folding Trailer Item #62648 axel. Spindle is too short for this hub. Need new axel and hubs for the older trailer. New trailer Item #62666.
I needed to replace a hub on my trailer. This pre-packed unit was very easy to install! Shipping got it to me quickly and finding the proper part was very easy on etrailer.com.
Good products, made my project easy.
Custom built tow dolly for my Classic Mini
The axle hubs are great. I really liked that the bearing races where already install in the hubs. The produced was just as shown in the pictures, you didn't have to guess on what was included. All I had to do is pack the bearings with grease, clean the axle shaft a little, install the hub kit with a little more grease, reuse my old washer ( spacer ). Install the old nut and carter pin, install the cap, put on the tires with the new lug nuts ,that came with the kit. It did not take but about 45 minutes to the side. I was in no big rush!
Me and my 12 year old Grandson fixing up a old 1970 Appleby Boat and Trailer.
Thank You
David Hutchinson
David H.
8/11/2020
The hub kits and bearings are still doing great. Thanks again
I contacted etrailer with a question regarding a very old small boat trailer. My customer service rep, Jane S, was able to determine my trailer need a diffrent complete Hub/bearings kit than I had intended to order! She determined the one I mentioned to her was slightly larger, and would do damage to the spindles over time! I ordered, then recieved an additonal email from Jane S advising she was able to get the order shipped to me within two days! etrailer is my go to source from this date forward!
Paul J.
10/28/2021
Excellent!
The hub assembly is well made and fit as advertised. In stock and readily available. We have purchased from etrailer.com in the past, and no complaints.
After finding etrailer online, I ordered the parts I thought I needed (Hub and bearing kits). They arrived within days, they fit perfectly and they are still going strong on a well-used trailer. I would go to them first if I need anything else. Very satisfied.
Terry G.
5/4/2018
Still frequently using the trailer with your wheels and hubs. No problems at all. Thank you.
Great product, arrived quickly. Originally ordered galvanized however I was quickly told they would not ship for a few weeks and these were an option. Thanks to the great sales personnel.
I just recently purchased a hub kit from etrailer it come with the hub bearings and the race and the cap it took less than ten minutes to install I would recommend this product to everyone the cost is half what the neighborhood hardware store I plan on using this company in future
Paul
11/2/2020
Wonderful installation was quick and easy
I emailed issue with a picture , and next reply was "the replacement is on the way" That is how you do business ! Thank you very MUCH
These hub assemblies were easy and fast to install. My trailer rides smoothly again.
Best price and fast shipping! Etrailer.com is my first choice for anything I can get for my trailers. The hubs I got are of great quality and fit perfectly.
Keith S.
8/7/2020
Perfect! Hubs held up all through waterfowl and fishing season. Tried to too-off withe grease and they are still full.
Keith
8/9/2021
Still working flawlessly
All was good
The part worked perfectly and was completely full of grease, and had both the solid and rubber cap grease caps. The reason for only four stars was the packaging. The solid grease cup was slightly damage in shipment, but I was able to straighten and use it.
The replacement hubs and bearings arrived before I thought they would. Just packed the bearings with grease. Greased the spindle and hub races; assembled and put on my trailer. Good to go. Don't like the hub cap that came with kit. Prefer solid caps that came on the trailer originally.
Very happy with etrailer!
Easy to shop on there site, prices were great, service was fast and the order
Was correct.
I found hubs and spindles for a project that are going to make it a lot easier than anticipated.
I'm making towable sign carts for a farmers market.
Thank you etrailer
The products were received in a timely manner, I was glad to get them as quickly as I did. The products, trailer tires, rims and fender was all of good quality and look forward of them lasting a long time. Thank you very much.
Customer service was excellent. Everything I ordered came in 3days. I will buy from etrailer again.
Kenneth R.
2/5/2021
All the parts are a year old and everything is fine. Great company to work with
Wheel, hub, and axle products ordered for a utility trailer. Standard free shipping was two days to my door. Everything packed together in one sturdy box for easy handling. Nice!
Service and price was great, ordering was easy enough too!
Absolutely fantastic! Works great, had all the parts I needed to replace the hubs and bearings on my trailer.
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
James
2/13/2022
With loaded off road use this hub has held up great and still runs true. When time for replacement comes i will order this same part from etrailer.com