How To Determine What Hub Assembly is Needed With a Bearing Inner Diameter of 3/4 Inch
Question:
I need a new 4 on 4 hub and not sure if I need the 1 or 1 1/16 size. I took the bearing out and its 3/4 Inside diameter. Does that tell you enough?
asked by: Dave
Expert Reply:
The Dexter Trailer Hub Assembly - 4 on 4, part # 8-91-05UC1, uses the # L44649 bearing as the inner and outer bearings. The inner diameter of the bearing is 1.063 inches (1-1/16).
The only bearing I have that has a 3/4 inch inner diameter is the Redline Bearing, part # LM11949, which is used as an outer bearing on the Agricultural Hub Assembly - 4 on 5, part # AH15450ECOMP. This is a hub that has a 4 on 5 inch bolt pattern and is used for low speed (less than 20 mph) agricultural applications.
The best way to verify what hub you might have is to get the part numbers off of the bearings and seal, so I can match them up to the correct hub assembly. If the part numbers are not available you will need to measure with a precise instrument, like a digital caliper, the inner diameters of both inner and outer bearings.
I am including a link to a page that will list the dimensions on all of the bearings we carry.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
- Trailer Hubs and Drums
- Hub
- Agricultural
- LM67048
- LM11949
- For 3000 lbs Axles
- 1/2 Inch Stud
- 4 on 5 Inch
- TruRyde
more information >
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.000 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - LM11949
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- .750 Inch I.D.
- Bearing LM11949
- Race LM11910
- 3000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: How to Measure a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Tire Sizing
- Q&A: Will The In Bed 7-Way Fit On a 2023 Ford F-150 With In Bed Power Outlet?
- Article: Trailer Wiring Diagrams
- Article: Car Camping Checklist
- Q&A: Repair Kit Availability for a 5125 Valley Coupler
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Q&A: Replacement Hub for Old Boat Trailer with 07100 Bearing
- Q&A: How to Replace Interior Ram Jack Rod and Nut # TJD-12000-RODNUT on 12000 Series Jacks
- Q&A: Do Other Wires Need to be Installed on 2023 Honda CR-V With Curt 4-Way C56370
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes