bing tracking image
Summer Starts Here - Save up to 70%
SAVE NOW
Customer Service My Orders
4 min
Q & A Icon

Gaining Rise With a Hitch Ball  

Question:

I purchased a cushioned convert a ball 10 inch drop, 10,000 lb ball mount from you some time ago for my pontoon boat trailer. Item AMSC10 for my 2014 Ram 2500. It works well and is level. I need to pull my dual axle utility trailer, it has a different stance and the 10 inch drop will tow it too low to be even. I saw that you carry hitch balls by curt that will give me either 1 inch or 2 inch rise on a 2-5/16 ball Item C40036. Only problem I see in the specs is that the ball is 1-1/4 inch diameter and the ball mount is 1 inch. any suggestions or do I have to buy a complete new ball mount with less drop?

1

Helpful Expert Reply:

You can get get a hitch ball with a 1 inch diameter shank that will give you 2 inches of rise with a 2 inch ball # C40034, though that is going to limit your towing capacity to 6,000 lbs.

If you needed to stick with a 10,000 lb towing capacity, then you would need a new ball mount, # C45338 for 8 inches of drop, # AMSC6 for 6 inches of drop or if four inches of drop was needed, # AMSC4. I have added links to video reviews of each of these ball mounts for you to take a look at.

expert reply by:
1
Kyle S
Ask The Experts a Question >>

Products Referenced in This Question




Product Page this Question was Asked From


Featured Help Information

Miscellaneous Media

Convert-A-Ball Ball Mounts - Fixed Ball Mount - AMSC4 Review
Convert-A-Ball Ball Mounts - Fixed Ball Mount - AMSC4 Review - Video
Convert-A-Ball Ball Mounts - Fixed Ball Mount - AMSC6 Review
Convert-A-Ball Ball Mounts - Fixed Ball Mount - AMSC6 Review - Video
Curt Ball Mounts - Fixed Ball Mount - C45338 Review
Curt Ball Mounts - Fixed Ball Mount - C45338 Review - Video
Curt Hitch Ball - Trailer Hitch Ball - C40034 Review
Curt Hitch Ball - Trailer Hitch Ball - C40034 Review - Video
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>