TowSmart Hitch Ball Set - 1-7/8", 2", and 2-5/16" Balls - 1" Shank - 8,000 lbs

See what our Experts say about this TowSmart Trailer Hitch Ball

• Adjustable Ball Mount that Can Use Sway Control
  The DrawTite Ball Mount Adjustable with Sway-Control Tab part # 7390 can be a great solution. You will want to replace the bolts with pins like part # PC3 for the quick adjustment to pull customers trailers around the lot and place the bolts in and torque them down for your longer camping trips. The reason for the bolts is to keep the sway ball in position so it can best fight the sway. This will work out great with the Reese Friction Sway Control Kit part # 83660. The ball mount uses...
  view full answer...
• Do We Have Adjustable 2-Ball Mounts For Class-2 Receivers?
  There are not 2-ball adjustable mounts in the configuration you need. but I have a couple of solutions. As you mentioned, popular hitch ball sizes are 1-7/8", 2", and 2-15/16", but the largest would typically be seen on bigger trucks and trailers. The size ball you need will be determined by the coupler on your trailer. The coupler size will be metal stamped on it You could consider using the TowSmart # 3481256 ball set that accommodates three sizes, and then you will need a ball mount...
  view full answer...
• Does Westin Step Bumper Allow Use Of Trailer Hitch Receiver On 1998 Ford Van?
  Typically, a step bumper is OEM style and will fit very well on a vehicle that has a trailer hitch receiver. This also applies to the Westin Fey Diamondstep Rear Bumper - Chrome Plated Steel # 21105 which fits the 1998 Ford Van. You can also get this bumper in Black # 20107 or Silver # 20105. No modifications will be necessary when installing this bumper. A really nice feature is the integrated hole for mounting a hitch ball. You can add something like TowSmart Hitch Ball Set - 1-7/8",...
  view full answer...
• Two Ball Mount 2 & 1-7/8 That Works With Rock Tamers
  I don't have exactly what you want, but I do have a solution. The Rock Tamers come in three sizes based on the hitch receiver size, which will be 2”, or 2-1/2”, or 3”. The other important requirement is 1” open area on the shank right next to the receiver. I have attached a picture illustrating this requirement. We do not have a two-ball mount that works with a typical 2” receiver, has 6” of drop\lift, and comes with 2” and a 1-7/8” balls. The closest match you can make is with a Curt...
  view full answer...
  
• Availability of Interchangeable Trailer Ball Set That Features Wrench Flats on Shank
  The Convert-A-Ball Interchangeable Trailer Ball Kits do not feature wrench flats on the shanks. Our installers routinely use a large screwdriver through the ball retaining hole in the shank to prevent the shank from spinning while the nut is torqued. We do offer a TowSmart Interchangeable Hitch Ball Set, as part # 3481256. The shank does have wrench flats, a 2-5/16, a 2 inch and a 1-7/8 inch trailer ball are included and the set has an 8,000 lb capacity when used with the 2-5/16 inch...
  view full answer...
• Is Fascia Trimming Required to Install Draw-Tite Hitch on 2020 Honda Passport
  The Draw-Tite Max-Frame Trailer Hitch Receiver # 76290 can be installed on your 2020 Honda Passport by simply raising the hitch into position and tightening the included hardware to the specs listed in the installation instructions. This is one of the easiest and simplest hitch installations and does not require any modifications to the fascia, bumper or any other part of your vehicle. To complete the trailer towing package on your 2020 Passport, you may consider the following products: Curt...
  view full answer...
  
• What is the Weight Capacity For Each Hitch Ball In The Tow Ready Interchangeable Ball Set 63803?
  I reached out to Tow Ready and they were unable to provide me with any specs for the individual hitch balls on the Interchangeable Hitch Ball Set # 63803. While I thought this is quite strange I am not surprised and it likely has the same ratings as the TowSmart Hitch Ball Set # 3481256. The 1-7/8" ball is rated up to 3,500lbs, the 2" ball is rated up to 6,000lbs and the 2-5/16" ball is rated up to 8,000lbs. This information is printed right on the balls themselves so there is no confusion...
  view full answer...
• Installation Photo of EcoHitch Hidden Hitch on 2012 Ford Focus Electric
  I have attached a photo of the EcoHitch Hidden 2 Inch Trailer Hitch Receiver installed on a 2012 Ford Focus Electric. The hitch is designed to fit 2012 through 2014 Ford Focus Electric vehicles. If you're in the market for a bike rack, the Swagman XTC-2 2-Bike Platform Rack # S64670 would pair up nicely with the EcoHitch receiver. If instead, you plan on towing a small trailer, you may consider the following parts to complete your towing package: # 118549 - 4-Pole Flat Trailer Connector...
  view full answer...
  

Do you have a question about this Trailer Hitch Ball?