Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Corrosion-resistant ball mount is 7-1/4" long and fits 1-1/4" x 1-1/4" trailer hitch receivers.
Features:
Specs:
Average Customer Rating: 4.8 out of 5 stars (1998 Customer Reviews)
Corrosion-resistant ball mount is 7-1/4" long and fits 1-1/4" x 1-1/4" trailer hitch receivers.I have a 2022 VW ID.4 AWD with factory installed receiver. This drawbar is 1/4" longer than VW recommends, but in rise orientation the length is required to clear the bumper. I ordered a shorter Curt drawbar but found it could not be installed in rise orientation because it hits the bumper before the pin hole is aligned. Both the shorter and this Curt drawbar fit fine in drop position, but were very tight in rise. I had to sand down the paint and file the corners to make the Curt fit easily so that it could be inserted and removed from the receiver by hand. I can't say whether this is a VW or Curt issue.
I highly recommend etrailer hitch and wiring harness They were both easy to install. The Prius pull the motorcycle camping trailer very well. You would not even know it was hooked to the car
Three stars only due to my specific case on the factory-installed hitch on a 2015 VW Tiguan. The black powder coat finish was applied extremly thick, and as such it would not slide into the hitch opening on the Tiguan. The reciever I used on my Jetta wagon slid in without issue, but the ball height woul be excessive, hence the need for this one. I spent about an hour removing the powder coat and appling a thin coat of rust preventitive paint in order to use it as intended.
All the items in my order arrived today. Thanks for your continued follow-up on this order and the speedy shipping once you had the item on hand. I also appreciated the installation video and pictures on etrailer. com. I routinely recommend that my customers reference your website for install instructions and product explanation videos. Keep up the good worK.
Using this with the Curt hitch to haul my camper. Works great. Solid.
Install was easy, Still use it to move the empty dolly around when the car is not being towed by the motor home.
I you have a Prius, this is the hitch for you.
From the minute I discovered etrailer.com for my new trailer hitch needs, called them on the phone, got to a live person who helped me order every item I needed, was alerted that my items had been delivered, and opened the door to see a big cardboard box that actually was still in one piece, it was a topnotch experience. Talk about great customer service...wow!
I will attach a photo of my hitch once it's installed on July 29.
Item has been installed on tow bar, but will not be used for at least a month. It is my best estimate of what I need for a new trailer I purchased, and will pick up mid-October, based on information from the trailer people. Shipped together with other items and arrived quickly.
The tolerance of off perhaps due to the thicker glossy paint(vs powder coating?) so the draw bar will not go in more then a quarter inche into the hitch. I got a different drawbar that’s looks like it is powder coated paint (non glossy) and that’s slide in smoothly.
Top quality, Made in US Curt ball mount. It's only class 1, but that is perfect for towing a 1200# Scamp behind a VW. Etrailer had it in stock, shipped it quickly. A great online buying experience. Thanks!
Standard class II ball mount. Receiver insert is made of square tube and drop of solid steel.
the product, a class one bar for a receiver hitch was excellent quality and finish the product was at my doorstep 4 days after the order was made, including the day I placed it. High quality, quick delivery you can;t go wrong
Fits in a Curt Class 1 receiver. Don't forget to order the locking pin separately.
fast shipping
the paint coating is hard and durable, but it dried with a bead of paint around the end which fits into the receiver. i filed the coating a bit and it was still a bit to tight. it is still hard to remove.
good strong products.
thanks
Quality is good, after one year of abuse it's holding up well. The size though is a little large, I had to pull out a sledgehammer to fit it in the receiver.
The hitch and ball mount came very well packaged. It looks as good as it was pictured. I have yet to install it and can't wait.
Easy to install and worked as needed. Videos and instructions made installation simple.
Disappointed that no bolt and nut provided to secure fitting through hole in mount For that small expense now I have to go to a store to finish setting up to use your productReally folks how much money did you save for not including securing pin?
I ordered a trailer hitch and a drawbar and both came quickly and was an exact match for my vehicle
Heavy duty. Good price!
Perfect fit and perfect for my application. Can use as either rise like in my application or drop. Very good quality....Very pleased. Handling of the shipment could have been better but overall. Great product.
Product arrived as promised and in new condition and was exactly what I ordered. I am impressed with etrailer and the quality of the products they offer. Try them.
I'm very happy with your company and your service. Your selection of products is great and ordering is fast and easy.
This is the third item I've ordered from etrailer. all were correct and a good value. I will use them again.
Quick delivery. Just what I ordered. Always a pleasure to do biz with etrailer.com
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Susan H.
4/8/2017
Still works great!