Will Curt Class I Hitch C11427 Work For Pulling Motorcycle Trailer With 2006 Toyota Avalon
Question:
will this support a motorcycle trailor
asked by: Herb Y
Expert Reply:
As long as the motorcycle trailer doesn't weigh more than 2000 lbs fully loaded and have a tongue weight greater than 200 lbs, the Curt Class I hitch, part # C11427 would work just fine for a motorcycle trailer.
In order to complete your towing setup, you'll need a trailer wiring harness like # 119178KIT, a ball mount like part # C45022 and a # PC2 hitch pin and a 1-7/8 hitch ball like # A-80 or a 2 inch ball like # A-82
Products Referenced in This Question
Tekonsha Tail Light Converter with 4-Way Flat Trailer Connector and Install Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- 1-1/2 Feet Long
- Universal Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- CURT
more information >
2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- CURT
more information >
Curt Class I Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 2,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- CURT
more information >
Pin and Clip for 1-1/4" Hitches - 1/2" Diameter
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Is There Fascia Trimming Required to Install the Curt Hitch # C11427 on a 2011 Toyota Avalon
- Q&A: Fit of Yakima Holdup Bike Carrier on 2006 Toyota Avalon With Curt Trailer Hitch Receiver # 11427
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Wiring Diagrams
- Article: Where to Position the Trailer Axle?
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Trailer Suspension Parts Needed to Increase Trailer Capacity from 7000 to 10000 lbs Gross Weight
- Article: Trailer Maintenance Schedule
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: What is the Difference Between Class 1 and Class 2 Hitches for the Scion XB
- Q&A: Replacement Trailer Hub/Drum for Part Number 2420801
- Q&A: Possible Replacement for Trostel 300-156-6 Seal
- Q&A: What Grade Is The Shackle Bolt ABS74FR?
- Article: Best Bike Racks for Electric Bikes