bing tracking image
  1. RV Waste Valves
  2. Valterra
  3. Single Waste Valve - Manual
  4. 3 Inch Valve Body
  5. Straight Valve
  6. Stationary Valve
Valterra Bladex Waste Valve Body for RV Black Water Tank - Aluminum Handle - 3" Diameter

Valterra Bladex Waste Valve Body for RV Black Water Tank - Aluminum Handle - 3" Diameter

Item # T1003VPM
Retail:$28.80
Our Price: $22.70
You Save: 21%
RV Waste Valves
Shipping Weight: 0.92 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Replaces the valve for your RV's black-water tank. 3" Diameter passage allows wastewater to travel freely when valve is open. Valve body, seals, nuts, and bolts included. Great Prices for the best rv waste valves from Valterra. Valterra Bladex Waste Valve Body for RV Black Water Tank - Aluminum Handle - 3" Diameter part number T1003VPM can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (588)
  • Q & A (0)
  • Videos (2)
  • Photos

Valterra RV Waste Valves - T1003VPM

  • Single Waste Valve - Manual
  • 3 Inch Valve Body
  • Straight Valve
  • Valterra
  • Stationary Valve

Replaces the valve for your RV's black-water tank. 3" Diameter passage allows wastewater to travel freely when valve is open. Valve body, seals, nuts, and bolts included.


Features:

  • Replacement valve for your RV's black-water tank
  • 3" Diameter passage allows wastewater to travel freely when valve is open
  • Die-cast aluminum handle
  • Valve body, seals, nuts, and bolts included
  • Fits Bladex, Valterra, Bristol, and Anonda valves
  • 1-Year warranty


To install, remove the broken waste valve and seals from your black-water tank. Then place the included seals on the flange fittings and position the new valve body. Tighten the provided hardware to complete installation.



T1003VPM Valterra Bladex Motorhome Black Water Holding Tank Waste Valve Body with Aluminum Handle - 3"





Video of Valterra Bladex Waste Valve Body for RV Black Water Tank - Aluminum Handle - 3" Diameter

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Valterra RV Sewer - Waste Valves - T1003VPM Review

Today we're going to be taking a look at the Valterra Bladex Waste Valve. This is a three inch valve. It's going to allow you to replace, repair, or upgrade to a new dependable valve. It's got a metal handle right here on top. Very strong, durable design. You shouldn't have to worry about that ever breaking.

That's going to sit on top of a stainless steel shaft that's going to be strong and durable, as well as highly resistant to rust and corrosion. Now, these valves are interchangeable with most other brands. It's going to include the valve, the seals, the nuts and bolts for your full installation. The seals are made from a santoprene construction that's designed to resist chemicals and corrosion. Now, when you're ready to install the unit you'll need to remove your old valve and seals. Place the new seals over the lip of the existing flanged fittings. Insert the new valve, being careful not to dislodge the seals.

Then, tighten everything down for your full installation with the included hardware. A few measurements to go over with you real quick. I do want to mention just how easy of an operation it offers. Really nice design. Allows you to easily open and close the unit. You've got the T-grip handle right here and it just operates really nice and smooth.

Now, the overall length of the unit with it in a closed position is going to be about nine and a half inches. With it open we're looking at about twelve and three quarters of a inch. The width is going to measure about four and three eighths of an inch. Then, it's got four mount holes that's going to be a square pattern, so the distance that we have between each hole, measuring on center, is going to be about three and three quarters of an inch. That's going to be the same separation between each hole. That's going to do it for today's look at the Valterra Bladex Waste Valve..

Customer Satisfaction Score:


Customer Reviews

Valterra Bladex Waste Valve Body for RV Black Water Tank - Aluminum Handle - 3" Diameter - T1003VPM

Average Customer Rating:  4.8 out of 5 stars   (588 Customer Reviews)

Replaces the valve for your RV's black-water tank. 3" Diameter passage allows wastewater to travel freely when valve is open. Valve body, seals, nuts, and bolts included.

by:

Easy to install, works fine.

Marc

3/29/2024

Very happy a year after my purchase.



by:

Thanks for the email
I don't have much
to say about the product. It is static in the open position 90% of the time.
I do appreciate how you at etrailer have kept me informed and asked questions, insuring that I am satisfied.
You may be able to tell from the attached photos, we are using these as gate valve for a fume exhaust system.
These are old photos. We have moved to a new facility, and the hoses are upgraded.



by:

Great price and products. Could have been shipped quicker.

Converting airstream thetford valve to vaulters. The combination I chose dropped the drain 2” below the belly. I’ll have to install a grey tank to tuck everything up in my 73 Sovereign 31’ center bath rv.



by:

There is nothing glamorous about buying 3" DWV fittings. But, etrailer made it easy with their great website and helpful videos. Was able to order all the fittings I needed to install a Sani-Con on my fifth wheel.



by:

Used this to replace the old valve on my black tank. Works as advertised



by:

Well I ordered quantity of 3, not sure what happened?
Original order # 115243947
Called in to change ship to address and guy changed to 1 I suppose??

Etrailer Expert

Jenny N.

9/21/2023

I will definitely have our Customer Service team reach out to you. Mistakes can happen and I think that was the case here.



by:

Love etrailer



by:

The items were shipped right away and they were exactly what I ordered. I have not installed them yet, but I do not anticipate any problems as it looks like they have everything that I will need included.



by:

The product arrived on time installation took less than 30 minutes repaired my leaking problem very satisfied I will definitely be shopping with you guys in the future and I'm going to tell everybody I know that RVs

Mark

3/8/2019

Holding up well still makes a great seal



by:

Easy to install. I would recommend to coat seals with petroleum jelly to hold in place while installing. Make sure black water tank is well drained and cleaned out before beginning install. Otherwise could be smelly business.

James B.

9/20/2018

5 stars. Easy to install after one year no problems noted. Still opens and closes easy. Recommend etrailer highly.



by:

Perfect fit and ridiculously easy to install! It came super fast and took about 10 minutes to install. I only wish I had bought a second one and swapped out the gray water valve while I was at it!



by:

Prior to receiving my order I was thinking that I would have to purchase associated hardware and seals, but the part I ordered came with new associated hardware and seals. That was an awesome discovery. It came ready to install.



by:

Valterra Bladex Waste Valve Body for rv waste tanks, fit and function was perfect. I purchased the valves with the new seals and bolts. Changed both in about 10 minutes. So if you have a gray water and black water tank, go ahead and replace them both. Your there one time to take care of any problems.



by:

I just recently purchased an (OLD) 1988 ALPENLITE, 25+2 Fifth wheel camp trailer. As
you would expect "the old girl needs some TLC". I am a new customer to etrailer & so far their service has been "GREAT" !!!!!!!!!!. The customer service ladies I have dealt w/
have both been very help full.



by:

I was highly impressed with my first experience with etrailer and Karen, the assistant who helped me with my order. It was exactly as advertised and at a very fair price. I used economy shipping and received my order in three days.
I will definitely go right to etrailer the next time I need RV parts.

Gene W.



by:

Shippping was timely and status was available for each step. Installation was easy with new hardware.



by:

I installed both grey water and sewer valves and it was a fairly simple job. The valves fit perfectly and I am happy with the Valterra valves.



by:

This item was out of stock for several weeks but etrailer stayed in touch with me and keep me informed of the status of the order on a regular basis. The item arrived last week and now I am ready for my next camping trip. I have ordered from etrailer in the past. Thier customer service and products are second to none.



by:

Excellent replacement valve for my 5th wheel.



by:

Exact replacement for 1990 Airstream black and gray dump valves. Work well.



by:

Very good product very happy with the trailer was very easy to install

Rick

8/12/2018

Works perfect highly recommend etrailer.



by:

perfect replacement for existing Bristol valves that got destroyed by a tire blowout going down the highway...always satisfied with etrailer's fast shipping & quality products.



by:

Excellent pricing, service & prompt delivery. Took about an hour to install both Grey & Black water dump valves.



by:

Reasonable price, super speedy shipping, item protected well in box. Appreciate the quick response to my product question. Was easy to install and such a relief to not lay down at a nasty dump station to pull the old gate out (bad back and neck). Camping just became a little more fun . . .



by:

Everything I said about the smaller valve applies here. Don't tighten much beyond hand tightening and make sure the rubber gasket is properly seated. Once installed, these valves should work trouble free for years to come.


25
522
Show More Reviews

See what our Experts say about this Valterra RV Waste Valves

  • My 3" Valterra Black Tank Valve Leaks - Needs New Seals
    As a clarification, all valves, including the # T1003VPM, include seals, as pictured in picture 10 on the product page. However, I can see that your 3" waste valve is missing it's seals. I would not buy a new complete valve when all you need are the replacement seals. Valterra makes two Replacement Seals & Hardware kits for their valves. The # T1003-7VP is for "old style" Valterra valves made prior to 2000, and # T1003VPM is the current style that fits Valterra, Bristol, Bladex, and Anonda...
    view full answer...
  • Reese Goose Box Replacement for 2007 Keystone Cougar Pin Box and Replacement Waste Valves
    Your 2007 Keystone Cougar did come with the Lippert 1621 pin box, so you can absolutely replace it with the Reese Goose Box # RP85FR. You will be well under the 20K capacity of this pin box replacement. If you just need the waste water valves, I recommend the Valterra Bladex Waste Valve Body for RV Gray Water Tank - Aluminum Handle - 1-1/2" Diameter # T1001VPM and the Valterra Bladex Waste Valve Body for RV Black Water Tank - Aluminum Handle - 3" Diameter # T1003VPM. These come with...
    view full answer...
  • Adding a Blade Valve to the end of my Tanks Dump Plumbing
    While there isn't an adapter to go directly between the Valterra Waste Valve for RV Black Water Tank part # T50A can be added on in place of your current 3" lug cap in place now. Simply cut it off and attach this one using the LaSalle Bristol ABS Solvent Cement part # 3447530889. This will give you the valve in place to keep the stuff off of your hands. The Valterra Bladex Waste Valve Body for RV Black Water Tank part # T1003VPM you looked at can be used to replace the existing valves...
    view full answer...
  • What is the Width of Valterra Bladex Waste Valve Body for RV Black Water Tank
    The Valterra Bladex Waste Valve Body for RV Black Water Tank, # T1003VPM has a width of 4-3/8". Please note the linked product review video below where several measurements for the valve are shown.
    view full answer...
  • Installation of the Valterra Bladex Waste Valve Body for RV Black Water Tank
    The image on the sight you refer to is of an uninstalled valve body, once the tubing is in place it will be sealed. When the Valterra Bladex Waste Valve Body for RV Black Water Tank, # T1003VPM, is properly installed there will not be any leaks.
    view full answer...
  • Dimension Thickness of the Valterra Bladex Waste Valve
    The Valterra Bladex Waste Valve Body for RV Black Water Tank, # T1003VPM is 3/4" thick. Please note the attached image.
    view full answer...
    Image 1 for
  • Waste Valve for Black Tank Will Open But Not Close with Handle
    It sounds like the linkage inside the waste valve might have become disconnected. I would first check to make sure the metal rod is tight inside the body and to the handle but aside from this I don't really have any repair procedures for this. If you can give me a bit more information as to what waste valve you have (make/model) I can call the manufacturer and see if they have any advice otherwise your best option would be to just replace the valve. For this we have the Valterra Bladex...
    view full answer...
  • 3 Inch Waste Valve for Black Water Tanks with a Removable Handle
    We do have a 3 inch diameter black water waste valve with a handle that unscrews but part # T1003VPM doesn't have a removable handle. Instead use part # 34439240 from LaSalle Bristol. Additionally, use part # 34466SP1112 for a 12 inch extension.
    view full answer...
  • Can the Ends of the Double RV Waste Valves # T80 be Removed
    You could remove the ends of the Double RV Waste Valves # T80 but instead of purchasing this part I recommend using the RV Sewer Elbow # T1036 which is what I believe you are trying to use. If you are needing to replace any of the valves we have those as parts # T1001VPM and # T1003VPM as well as the cap as part # T1020 but if you need to replace that much it is much more cost effective to go with the whole unit that you referenced. I have linked our selection of RV sewer parts as well...
    view full answer...
  • Availability of 3 inch Waste Valve to Replace Bristol Waste Valve
    We have quite a few different 3 inch waste valves that would work for you. For example, we have the Valterra Bladex Waste Valve Body # T1003VPM which has an aluminum T-handle on it for opening and closing.
    view full answer...
  • Slip Hub for Attaching a Waste Valve to a 3" Outlet on a Gray Water Tank
    Yes, using the Valterra RV Sewer Slip Hub with Flange # T1005 paired with a guillotine style waste valve like the Valterra Bladex Waste Valve Body # T1003VPM is a good option for your gray water tank. This would bond together using the Valterra ABS Solvent Cement # A05-0303.
    view full answer...
  • Replacement Seals for 1-1/2 Inch Valterra Bladex Waste Valve
    The Valterra Bladex Waste Valve Body for RV Gray Water Tank - Aluminum Handle - 1-1/2" Diameter # T1001VPM uses replacement seals # T1001-9VP. For your 3 inch valve, you most likely want the Replacement Seals and Hardware for 3" Valterra Waste Valves # T1003-7VP but I can't confirm the fit, so you may just want to use the Valterra Bladex Waste Valve Body for RV Black Water Tank - Aluminum Handle - 3" Diameter # T1003VPM to have a precise fit.
    view full answer...
  • Do Hub and Spigot Connections Need to be Cut Off to Swap Out Drain Valve
    It depends on what type of waste valve you currently have. If you have a Valterra Bladex then you can replace the waste valve body with part # T1001VP for a 1-1/2" diameter or part # T1003VPM for a 3" diameter. If you have a different brand or you aren't able to swap out the valve body then you will need to replace it with the hub and spigot ends like part # 34466N11AB36GM or # 34466N4AB36GM respectively.
    view full answer...
  • Could Valterra Bladex Waste Valve Be Used with 3-1/2 inch Valve Body
    If the 3-1/2 inch diameter you mentioned is the outside diameter and the inside was 3 inch yes, the Valterra Bladex Waste Valve Body for RV Black Water Tank # T1003VPM could be used. If you needed the entire valve assembly you'd want the part # T40A instead. This comes with a spigot fitting on either end of the valve.
    view full answer...
  • Replacement Waste Valves Needed for a 2000 Fleetwood Discovery Motorhome
    It actually looks like you have the Valterra Double RV Waste Valves # T80. This comes with both of the waste valves already installed and they can be rotated 360 degrees on the elbows for ease of installation. We do have replacement waste valves but to know exactly what you need you would have to take your current system apart. If it all comes off as one unit then you can install the # T80. If it comes apart differently please let me know and I can help you find the correct replacement...
    view full answer...
    Image 1 for

Do you have a question about this RV Waste Valve?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Cole B
Installed by:
Cole B
Employee David F
Installed by:
David F
Employee Amy B
Written by:
Amy B
Employee Chris R
Video Edited:
Chris R
Employee Schuyler H
Video by:
Schuyler H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.