Valterra RV Sewer Slip Hub with Flange - 3"
(77 reviews)
Price: $5.65
In Stock
Valterra RV Sewer Slip Hub with Flange - 3"
Item # T1005
Retail:$16.90
Our Price: $5.65
You Save: 67%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (77)
- Q & A (0)
- Videos (1)
- Photos
Valterra RV Sewer Hose Fittings - T1005
- Sewer Seals and Gaskets
- Slip Hubs
- 3 Inch Diameter
- Sewer Pipe to Waste Valve
- Hub
- Valterra
This sewer slip hub bolts onto your black-water waste valve. 3" Hub slides onto black-water waste pipe and secures with ABS solvent bond (A05-0303 - sold separately).
Features:
- Sewer slip hub connects your sewer pipe to your black-water waste valve
- 3" Hub slides onto black-water waste pipe
- Secures with ABS solvent bond (A05-0303 - sold separately)
- Flange bolts onto black-water waste valve
- Hardware not included
- Sturdy plastic construction
Specs:
- Hub diameter: 3-1/2"
- Hub depth: 1-1/2"
- Mounting holes: 3-3/4" apart on center
- 1-Year warranty
T1005 Valterra Motorhome Sewer Slip Hub with Flange - 3"
Video of Valterra RV Sewer Slip Hub with Flange - 3"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Valterra RV Sewer - Connectors and Fittings - T1005 Review
Today we're going to take a look at the Valtera three inch RV sewer slip hub with the flange. This is made of a black hard plastic construction. Now a few measurements on this. The inside diameter on the shorter end is going to be three inches. On the flange end, inside diameter is three and a half inches. The over all length of just the flange portion is going to be right at one and a half inches.
Then the measurement on the mounting hole, center to center is going to be right at three and three quarter inches. That should do it on the Valtera three inch RV sewer slip hub with the flange.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Did not arrive in time
Customer Reviews
Valterra RV Sewer Slip Hub with Flange - 3" - T1005
Average Customer Rating: 4.9 out of 5 stars (77 Customer Reviews)
This sewer slip hub bolts onto your black-water waste valve. 3" Hub slides onto black-water waste pipe and secures with ABS solvent bond (A05-0303 - sold separately).by: Larry 04/24/2024
Works great. An easy installation.
by: Mike 04/18/2023
There is nothing glamorous about buying 3" DWV fittings. But, etrailer made it easy with their great website and helpful videos. Was able to order all the fittings I needed to install a Sani-Con on my fifth wheel.
by: Tim08/23/2022
The parts were exactly like the ones I replaced, they came in a timely manner. Great price.
by: Julie 11/01/2023
Perfect fit - gets the job done :)
by: John Mongeau02/03/2023
how do you hook you hook up your sewer hose to this part??? There is a piece of pipe adhered to the drain that blocks you from installing the sewer hose.
by: Ted M.10/18/2018
I purchased a number of plumbing components for my class A motor home. It has been a year since they were installed and I have had no issues what so ever. I am very pleased with the quality of the plumbing components as well as the availability of a rather obscure piece I needed for the repair.
I will definitely use etrailer in the future.
Ted M.
10/19/2019
No problems after a year of use.
by: Gary03/31/2022
I had broke two on my camper in transport. Tried to find these everywhere. No other site or plumbing specialities had these e trailer was the ONLY place I could find them. So after several days of searching I finally bought them through e trailer. I had them within 3 days and installed just as soon as I got them
by: Margie 04/24/2023
Very helpful and efficient in assisting me with the correct part! Thank you
by: Eddie 04/26/2023
Worked great
by: Harold04/20/2023
Good fit, worked out great.
by: Randal S04/20/2017
Fast Service and all the parts I needed for my project
Randal S.
4/23/2018
They are being installed into my off grid trailer this weekend
by: Mike07/03/2019
I researched many places before selecting etrailer. They had the best selection and pricing for ABS fittings. I received all parts as ordered and scheduled. Very easy process and kept my RV plumbing project on schedule.
by: Chris H.08/12/2019
I rebuilt the waste line clean out, redirecting the exit points. I used this Valtera system to replace the old "pull handle" It works great !
by: Gary08/17/2018
Product just as described and worked perfectly for my RV black water pipe repair project. Shipping was relatively fast and arrived on schedule. If purchasing this, be aware of the terms "spigot" vs. "hub" (i.e. male vs female receiver).
by: Linda 07/29/2022
We are making a transit bus into a camper and I need this part to attach to the bus for the sewer (gray water)
by: Keith03/03/2023
I received the parts I ordered in a quick and timely manner. Thank you.
by: John 07/29/2022
etrailer really delivered and ahead of schedule as well. I will continue to use them for my RV need when I can. Great Job e trailer
by: Doug S.06/14/2017
Connectors for the abs tank arrived fast and worked great. Video descriptions are a great help before ordering preventing surprises upon arrival.
by: Robin05/30/2021
Bought to convert flanges on my gate valve for permanent install. High quality parts.
by: Timothy08/30/2018
Always a pleasure to do business with etrailer. Got exactly what I ordered and got it on time!
by: Geoff03/26/2018
Need two to install new dump valve. Good price and reasonable shipping at etrailer.
by: Gary09/01/2018
Cut it down a few times and still worked to mate the new vaulters valve in my old rv.
by: Rick 12/02/2022
Perfect fit. Fast shipping
by: Michael 09/20/2022
It does what it is supposed to do
Thank You
by: Daniel 07/20/2022
Excellent experience! Website was easy to navigate and order. Product was exactly what I needed.
25
77
Show More Reviews
See what our Experts say about this Valterra RV Sewer Hose Fittings
- Parts Needed to Flat Tow a 2006 Jeep WranglerI would be happy to help you set up your 2006 Jeep Wrangler for flat towing. You are going to need a base plate kit, tow bar, safety cables, tow bar wiring, and a supplemental braking system. If you don't already have a tow bar, I recommend the Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar w/ LED Lights - RV Mount - 8K item # RM-676. This sleek and simple all-terrain tow bar has integrated LED lights that turn on and off with your RV's tail lights. It is rated for up to 8,000 lbs...
view full answer... - Can The Valterra EZ Valve Electric Waste Valve Replace the Manual Valve Already On My Camper? Yes, the Valterra EZ Valve Electric Waste Valve # E40B-8 uses the same size 3" Slip Hub with Flange # T1005 that you have on your sewer line already. The Valve may benefit from being installed up in your enclosed underbelly with the Valterra ABS Solvent Cement # A05-0303 if you do camp when the weather is colder to help prevent the sewer pipes from freezing. It will also protect the valve from damage caused by road debris while you are driving.
view full answer... - Compatibility of Camco RV Waste Valve With Valterra RV HubsYes, the Camco RV Wastewater Tank Replacement Valve # CAM39513 will have the same bolt pattern as the Valterra RV Sewer Slip Hub # T1005 that you are connecting to. I would still recommend using a Valterra Bladex Waste Valve # T1003VP as it does not have the channels on the side and will sit flush with the mounting hubs. I don't like the grooves as they are a place that can hold water and dirt. This could lead to unwanted damage from freezing or corrosion.
view full answer... - Difference Between Valterra RV Sewer Spigot with Flange and Valterra RV Sewer Hub with FlangeThe Valterra RV Sewer Spigot with Flange part # T1006 has a spigot fitting which means it will slide into a 3" diameter sewer pipe and the Valterra RV Sewer Slip Hub with Flange part # T1005 has a hub fitting which means it will slide onto a 3" diameter sewer pipe.
view full answer... - Can the Valterra EZ Valve Electric Waste Valve # E1003VP be Installed Right Behind the Waste CapYou definitely can use the Valterra EZ Valve Electric Waste Valve # E1003VP just before the cap to your black water tank to avoid any unpleasant presents when you take the cap off. To install it you will just need to cut the pipe and then glue the appropriate pieces together with Valterra ABS Solvent Cement # A05-0303. A great option to accomplish this is to use the Valterra RV Sewer Slip Hub with Flange # T1005 that has a 3" diameter. Just keep in mind that when the valve is open it...
view full answer... - Recommended Sewer and Gray Water Connections for RV Permanent Location with In-Ground TanksFor a permanent connection if you want the wye fitting you mentioned like the Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Spigot # T81 and then the Double RV Waste Valves - Elbow - Rotating - (2) 3" Spigots to 3" Hub # T85B. The actual manual handles will give you the manual shutoff you are seeking and they can be rotated so they don't come in contact with the other handles when installed together. It is recommended to use PVC instead of hoses for as much length...
view full answer... - Inner and Outer Diameter of Valterra T1005 Sewer Slip HubThe outer diameter of the Valterra # T1005 is 3-1/2 inches and the inner diameter is 3 inch.
view full answer... - Can Valterra Waste Valve T58 be Upgraded so that it's Permanent InstallYes, you could remove the twist on side of the Valterra Waste Valve part # T58 that you have now and replace it with the part # T1005 so that you could make it more permanent like you are wanting.
view full answer... - Slip Hub for Attaching a Waste Valve to a 3" Outlet on a Gray Water TankYes, using the Valterra RV Sewer Slip Hub with Flange # T1005 paired with a guillotine style waste valve like the Valterra Bladex Waste Valve Body # T1003VPM is a good option for your gray water tank. This would bond together using the Valterra ABS Solvent Cement # A05-0303.
view full answer... - 3" Slip Hub For A 3" RV Waste ValveYou can do that, however the mounting holes on # T1005 are a bit too close together, and won't properly mount to the Valterra Bladex Waste Valve for RV Black Water Tank # T40. Instead, I recommend using the LaSalle Bristol RV Sewer Slip Hub with Flange # 34466V13 which has a farther apart mounting hole location. To properly secure these items together, you're also going to need some solvent # 3447530889 .
view full answer... - Replacement Waste Plumbing Fittings For An RV Waste System If you have two connection points with a 3-1/2" inner diameter and just need something to slip into both of these connections then you would just need standard 3" ABS pipe, which we do not currently offer but you can get at a local hardware store. The outer diameter of the pipe would be 3-1/2" and you could slip it into the hub of the The Valterra RV Sewer Slip Hub with Flange - 3" # T1005. After slipping it over the pipe you can then attach a gate valve to the flange.
view full answer...
Do you have a question about this RV Sewer Hose Fitting?
Info for this part was:
Installed by:
Jeff D
Expert Research:
Jameson C
Written by:
Amy B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Tim
8/26/2023
Working great.