Valterra Waste Valve Body for RV Black Water Tank w/ Coupler, Seals, and Hardware - 3" Diameter
(75 reviews)
Price: $27.23
In Stock
Valterra Waste Valve Body for RV Black Water Tank w/ Coupler, Seals, and Hardware - 3" Diameter
Item # T1003PBC
Retail:$33.99
Our Price: $27.23
You Save: 20%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (75)
- Q & A (0)
- Videos (1)
- Photos
Valterra RV Waste Valves - T1003PBC
- Single Waste Valve - Manual
- 3 Inch Valve Body
- Straight Valve
- Valterra
- Stationary Valve
Replaces the valve for your RV's black-water tank. 3" Diameter passage allows wastewater to travel freely when valve is open. Valve body, seals, Allen wrench, and hardware included. Handle sold separately.
Features:
- Replacement valve for your RV's black-water tank
- 3" Diameter passage allows wastewater to travel freely when valve is open
- Valve body, seals, Allen wrench, and hardware included
- Handle sold separately
- 1-Year warranty
To install, remove the broken waste valve and seals from your black-water tank. Then place the included seals on the flange fittings and position the new valve body. Tighten the provided hardware to complete installation.
T1003PBC Valterra Motorhome Black Water Holding Tank Waste Valve Body with Coupler, Seals, and Hardware - 3"
Video of Valterra Waste Valve Body for RV Black Water Tank w/ Coupler, Seals, and Hardware - 3" Diameter
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Valterra RV Sewer - Waste Valves - T1003PBC Review
Today we're going to take a look at the Valterra 3-Inch RV Waste Valve Body with the coupler, the seals and the hardware. This Valtera 3-inch RV Waste Valve Body is designed to be used with a flexible cable handle. It includes the coupler right here that attaches to your cable. Includes the seals, one for each side of the valve body and it even includes the hardware at the bottom, the 4 bolts and nuts to install this to your system. It comes with the Allen Wrench which is used right here to loosen that up, attach your cable and then tighten it down. As you can see as it operates it will open and close and just to give you an idea of the inside diameter of that opening is right at 3 and a half inches. That should do it for the review on the Valterra 3-Inch RV Waste Valve Body with the coupler, the seals and the hardware.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Valterra Waste Valve Body for RV Black Water Tank w/ Coupler, Seals, and Hardware - 3" Diameter - T1003PBC
Average Customer Rating: 4.7 out of 5 stars (75 Customer Reviews)
Replaces the valve for your RV's black-water tank. 3" Diameter passage allows wastewater to travel freely when valve is open. Valve body, seals, Allen wrench, and hardware included. Handle sold separately.by: Jake F.01/13/2024
Don't throw away your old parts!! Bolts are too short. The Allen set screw is three threads long and i did not think it even came with the part. It was an exact replacement and it worked. Valterra is just skimping on materials to save money.
by: Scott 03/08/2024
Not a fun job to replace but did fix our sticking waste water valve. Lucky for me the tank was empty. The exit is at the rear of the tank so I lowered the front of the camper just to be sure not liquids tried to sneak out when I removed the old one. One you get the plastic on the bottom down the valve swap took five minutes.
by: Fran 03/27/2024
Valve bodies were shipped the following day from when I placed the order. Very easy to install and work smoothly. They are a direct match for my Winnebago view. unfortunately, you do have to use the bolt that you remove as the bolts supplied with this are about a half inch too short.
by: Andrew08/05/2022
I installed this over a year ago and it still works great and no leaks. It’s not easy to install; I had to cut the underbelly of the RV (slit it with a utility knife) and peeled a small portion of it back to access the valve. Then I sealed the underbelly with duct tape, it still holds solid.
by: Glenn 02/19/2024
Got all the goodies but....I was surprised it didn't appear to have stainless screws. My old handle won't fit on the new type valve. Oh well.......
by: Brandon F03/11/2024
Installed easily and the valve is still going strong one year later!
by: Robert 04/18/2024
Quick service, reasonable price for name brand item
by: Keith 03/18/2024
Just what I needed to repair my valeve without replacing the whole assembly
by: Richard02/10/2024
They get plugged up too soon.
by: Roy07/12/2023
Replaced a valve worked for about a month and then started leaking again Between the black tank in the outlet
by: Robb 05/15/2023
It was and exact replacement for my old valve. Other sites wanted to sell all of the attachments but I only needed the valve and that’s how you carry it.
I’ve always been happy with products from etrailer.
by: Gary08/03/2021
Only vendor I could find that had only the valve body without couplings and cable. Just what I was looking for. Item was shipped timely and arrived a day early and it was just what I ordered. Installed the valve today and it did the trick. No leaks, smooth and easy pull. For sure in the future when I'm needing anything for my RV I will return to etrailer.
Gary S.
8/4/2022
The valve is working as well as the first day I installed it... No complaints at all...
by: Steve06/17/2020
This replaces an identical black tank valve in my RV. It is identical to the one I removed, was a relatively easy install, and fixed my problem. The price was fair and, as always, was delivered quickly and well packaged. etrailer is one of my go to companies for parts, information, and advice and they are always great to work with.
Steve
6/18/2021
Two of the bolts holding this valve in worked loose, initially causing a smell in my RV and later flooding my wet bay floor with black water. Once I figured out what the problem was it stopped leaking. It took several days to figure out that the valve had loosened up, each followed by a thorough clean up. The valve itself was fine and I still give it five stars, but flat and lock washers should be included when this valve is purchased.
by: Glen 12/17/2022
I received this product yesterday and installed it today. Works great just as the do. I recommend this product to anyone and will order more items from etrailer. Fast shipping great job.
by: Jimmy 01/08/2022
The Valterra 3" waste valve had worked flawlessly, it is made very well, had all the necessary parts for the install in the kit and was a great value. Vicki N. you and etrailer was awesome to work with!
by: Robert M.08/21/2018
I ordered two(2) 120 inch pull cables and 11/2 inch and 3 inch gate valves. At first I could not find the 120 in cable on line so i called the company and the girl that answer ( i wish i had wrote down her name) was a great help. She directed me were to look and help with my order, She also said that I could download the catalog witch is a great help for future needs . My order showed up in 2-3 days. Parts were easy to install. Everything was done within a week i am very pleased with process and parts. Sorry i don't have pictures. Thank you etrailer
by: Brian 01/27/2022
The product arrived with all hardware shown, no looking for an allen wrench to fit, but there is one small issue with the bolts. Since this is a remote operate valve, there is an extension that needs to be installed for the cable to be installed correctly. IF the extension was not needed, the included bolts are fine. Because the extension is needed for this application you will need two bolts that are 1/8" to 1/4" longer to make up for the added thickness of the extension.
by: William A10/13/2017
Exactly what I ordered - will install it next week in my camper trailer!!
William A.
10/13/2018
Still working fine - no problems!!
by: Greg R.08/29/2017
Valve matched exactly what was there. The bolts were all the same length however, and the cable housing required longer bolts. Just save the two that hold the cable housing to the valve for reuse
by: Rebecca 11/28/2019
Ordered a black tank drain value was surprised that Etrailer had exactly what we needed. Received the product in a fast timely manner. Also wanted to say thank you Pat C for her help in making this order happen.
by: Michael03/26/2018
I damaged my old valve trying to replace the seals. Good product, but pay attention to how the cable is clamped when you take the full assy apart to replace just the valve.
by: Tomcat P.09/16/2017
My black tank valve had gotten hard to open and close, and also the seals had started to allow the liquid to slowly bypass. Found this great buy from etrailer.com and it was here in a week. Easy to install, great price, no issues.
by: Peter 09/29/2022
Excellent replacement part. Works great
by: Michael11/01/2021
The part was the correct one and was shipped as I asked. But the bolts that hold my valve on to the RV were the incorrect size so I had to use the old ones again. Thank you for the good service.
by: ErikaE06/07/2021
This was exactly what we needed to fix our leaking black tank shut off valve. It was very easy to install and is holding like a champ.
25
75
Show More Reviews
See what our Experts say about this Valterra RV Waste Valves
- Dimensions Of Valterra RV Waste Valve Body With Coupler, Seals, And HardwareI pulled the item from our warehouse to measure it for you. The Valterra RV Waste Valve Body with Coupler, Seals, and Hardware - 3" # T1003PBC has a thickness of 5/8 inches and a hole spacing of 3-3/4 inches.
view full answer...
- Grey & Black Water Gate Valve ReplacementThe gate valves you are referring to usually come in 1-1/2" and 3" - most often 3". These gate valves are usually in your trailers "wet bay" and only need a short pull handle. But sometimes they are located nearer to the tank and require a long cable on the valve. For 3" valve with short handle use the Valterra # T1003VP valve For 3" valve with cable use the Valterra # T1003PBC valve For 1-1/2" with short handle use the Valterra # T1001VP valve For 1-1/2" with cable use the Bristol...
view full answer... - Replacement Valve Body for 3 inch Black Water Tank Valve of 2017 Solaire Forest River Palomino 23Yes, the Valterra Waste Valve Body for RV Black Water Tank w/ Coupler, Seals, and Hardware # T1003PBC that you referenced will fit as a replacement for the 3 inch valve body you have now. You'd just need to unbolt your old valve, remove it, and then reinstall this in it's place.
view full answer... - Replacement 3 Inch Valterra RV Sewer Valve BodyThe # T1003PBC valve is the one you will need for your sewer plumbing. We refer to it as valve body, because it does not include the handle, which you need to operate. Since you have indicated you have a 18 inch extension handle the # T1003PBC is the only part you will need to complete your replacement valve system. I have linked this product page for your convenience.
view full answer... - Replacement Seals for Waste Valves Which are Difficult OperateOften times when a Waste Valve # T1003PBC becomes difficult to operate the seals need to be cleaned and lubed. We also have Replacement Seals for 1-1/2" # T1001-9VP, 2" # T1002-7VP and 3" # T1003-9VP valves if they are damaged. New hardware is included with these seals as it typically corrodes.
view full answer... - Replacement Waste Valve for a 2008 Dutchmen Adirondack 31RLThanks for reaching out, Ryan! The Valterra Waste Valve Body # T1003PBC will work as long as you're replacing this on a 3" diameter waste valve that can be removed. I unfortunately don't have the specs on what came on your 2008 Dutchmen Adirondack 31RL so you'll need to verify this on your end.
view full answer... - Whats Difference Between Black and Gray Water RV Tank Valve AssembliesThe only difference between black and gray water valves is the color of handle. Technially the part # T1003PBC fits both black and gray water assemblies.
view full answer... - Availability of Valterra Waste Valve Body without Cable I do have an option for you, however the exact valve body that is included with the Valterra Waste Valve w/ Flexible Cable # TC372 you mentioned is not available as a separate part from the manufacturer. What you can use instead is the Valterra Waste Valve Body # T1003PBC. This is a very similar valve body that will work the same as what is included with the kit you mentioned. The body features a 3 inch diameter passage to allow wastewater to travel when it's open and the body, seals,...
view full answer... - Will Valterra Waste Valve Body # T1003PBC Fit 2015 Cedar Creek In general all black water waste valves are the same size and the Valterra Waste Valve Body # T1003PBC that you referenced woudl fit and work well as this is the standard 3 inch size. The thickness is 5/8 inch and the hole spacings are 3-3/4 inches.
view full answer... - Replacement RV Waste Valve to be Used with Cable HandleThe Valterra Waste Valve # T1003PBC is designed to be used with a cable handle so it will work well for you.
view full answer... - Service / Repair Manual for Cardinal 5th WheelWe do not have service manuals for any brand of RVs, but I may have a solution. We only have instructions for repair parts as provided by the manufacturer. In the case of the referenced valve, the manufacture has not provided any instructions. If you have the Valterra # T1003PBC that you referenced and you broke the "handle", I am going to guess that you are speaking about the handle in the wet bay rather than the handle where the valve is. If this is the case you may actually need the...
view full answer... - What's Difference Between Valterra and Valterra Bladex RV Waste ValveThe standard Valterra replacement valves like the part # T1003PBC are designed to attach to a remote handle that's further away while the Valterra Bladex like part # T1003VP the handle is right at the valve instead. Both valves are interchangeable with each other.
view full answer... - Replacement 3" and 1-1/2" Sewer Valves for RV with Cable Handles It sounds like you're looking for the Valterra Waste Valve Body for RV Black Water Tank part # T1003PBC and Valterra Waste Valve for RV Gray Water Tank part # T1001PBC. These will accept your old cables so you don't have to worry about replacing the handles and cables as well.
view full answer...
- Replacement RV Dump Valve To Be Used With Cable System On 2015 Dynamax REV RBThe Valterra RV Waste Valve Body with Coupler, Seals, and Hardware - 3" # T1003PBC will work with your Bristol cable system. It will function very much like the complete Valterra Flexible Cable Kit - 3" Valve - 72" # TC372 that has the cables included. As long as you have the cable and housing for the valve, the # T1003PBC will work great as a replacement on your 2015 Dynamax REV RB with Bristol cable RV Dump valves.
view full answer... - What Type of Handle Does Valterra Waste Valve Body for RV Black Water Tank T1003PBC UseThe waste valve part # T1003PBC is designed to be used with a cable handle like # TC96PB for a 96 inch cable or # TC72PB for a 72 inch cable. These are all black handle as there isn't a gray handle setup for this valve.
view full answer... - Troubleshooting An RV Waste Valve Gate That Is Not Opening When The Actuator Is Pulled It is completely within the realm of possibilities that the actuator has become disconnected from the gate internally causing the valve to not open. The Valterra Waste Valve Body for RV Black Water Tank w/ Coupler, Seals, and Hardware - 3" Diameter # T1003PBC you were looking at will mount with four bolts allowing you to easy swap out the old valve and install this new one. An example of this valve attaching to other fittings using four bolts would be the # T50A. I recommend just replacing...
view full answer... - Availability of Valve Similar to Valterra Waste Valve Body # T1003PBC With T HandleSounds like instead you would want the part # T1003VP which is a similar valve as the # T1003PBC except it comes with the T handle. The part is ABS plastic, so you could use an ABS sealant or glue. The glue is not included though. Part number # A05-0303 will seal plastic parts and would work well for you.
view full answer...
Do you have a question about this RV Waste Valve?
Info for this part was:
Installed by:
Jeff D
Expert Research:
Jameson C
Written by:
Amy B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Andrew
9/5/2023
Worked great. Thanks!!!