Does Ventline Roof Vent Fan Run on 110V AC Power?

Question

Question:

V2128SP-01 Hello, I was reading through the description of this product and in the installation instructions it says to connect to a 110V DC power source. I dont believe that this product runs at 110V DC, it is much more likely that it is a 110V AC if the 110V spec is true. Please let me know if I am incorrect. Thank you,

asked by: Kurt R

0

Expert Reply:

You are correct; the Ventline Roof Vent w/ 110V Fan # V2128SP-01 does run on 110 volt AC power.

This vent comes with a garnish and fits roofs 2-1/8" to 3-1/4" thick. I have added a link to a video review of this vent for you to take a look at as well.

expert reply by: Kyle S

0

Answer 1

We do have one RV roof vent that can be used with 120 volt power with the Ventline Roof Vent part #V2128SP-01. This would work great with the AC power you have currently there. We don't have any MaxxFans that can be used with this type of power…

view full answer...

Answer 2

Because the Ventline fan #V2128SP-01 is 110 volt, it would have to run off of AC power (110 volt shore power). This item is normally found on larger motor homes and will run when connected to shore power or when using a generator. Because the motor…

view full answer...

Answer 3

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 4

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 5

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

Answer 6

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 7

Yes, you are correct. In order to correctly take this measurement you will need to measure from the center of the spindle to the center of the main axle tube. I have included a picture for reference.

view full answer...

Answer 8

Since you have a Dometic AC unit the best option to replace it from Advent would be the part #ACDOM135 which was designed for this exact situation and would allow you an easy install since the electronics would plug right in.

view full answer...

Answer 9

The Replacement Crank Extension for Lippert Components Spare Tire Winch Assemblies #LC1315411, which is a replacement for Lippert Components Spare Tire Winch with Offset Cable #LC159056, has an inside diameter of 0.50 inches and the hex has a 0.75…

view full answer...

Answer 10

There are going to be two parts to the handle that you will need to operate the Lippert Components Spare Tire Winch part #LC159056. The first of which is the intermediate shaft or what Lippert calls a Crank Extension part #LC1315411. This will be…

view full answer...

Answer 11

I was able to find the OEM part number for the Chevy spare tire hoist but I was unable to find a weight capacity rating on it. The owner's manual for the 2015 Chevy Silverado 1500 and the original hoist can handle the weight of a full sized spare…

view full answer...

Answer 12

The crank handle for the Lippert Components Spare Tire Winch with Offset Cable item #LC159056, is Replacement Crank Extension for Lippert Spare Tire Winch Assemblies - 35-1/2" item #LC1315411. The Spare Tire Winch item #LC159056 has a 1/2-inch…

view full answer...