In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly…

Yes, the correct replacement lid cover for your MaxxFan Plus Roof Vent w/ 12V Fan part #MA00-04500K (4951KS) is the Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents part #MA10A40009K.

Actually the type of roof vent cover you need to attach to the vent cover brackets of your Maxxair 4951KS like part #MA00-04500K is the part #MA00-955003 which uses those brackets with the included cotter pins of the cover.

I&…

We have actually spoken with Ventline regarding your model AS-13 M-VD0449 in the past and they have confirmed that the correct replacement cover is the part #BVD0449-A03 in Smoke or #BVD0449-A01 in White. The cover measures 14 inches x 14 inches…

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

We have two options of replacement vent covers for the V2094 model, the white dome assembly, #BVD0449-A01, and the #BVD0449-A03 for smoke. These work for Ventline Ventadome roof vent models V2092, V2094, V2119, and V2128 after 2008. Pre 2008,…

While I have no way to see exactly what leveling system you have on your 2006 Tiffin Phaeton 35DH, I was able to find information on a forum showing someone who did confirm the SnapPad HiWay 10 Jack Pads for HWH and Atwood Leveling Systems w/…

LaSalle Bristol RV Plumbing Roof Vent #34474558B is made to fit on RV pipes with an outside diameter of 1-1/4-inches or 1-1/2-inches. The actual hole diameter through which the RV vent pipe will extend measures 1-7/8-inches as shown in the photo I…

The Dometic Ultra Breeze Trailer Roof Vent Cover part #DMC38FR installs using brackets which secure to the vent lid flange. The brackets are screwed into the roof but the cover is attached to the bracket using pins and is easily removeable. I have…

Hey Dave, yes the High Pointe Convection Microwave our part number #HP99ZR is the exact same as the part number you are looking for so this would be exactly what you are looking for as a replacement.

It sounds like there is an electrical short on your trailer wiring that is activating your left rear brake assembly and that is why the brake continues to drag and get hot. Since you have swapped the brake assembly out and still had the problem you…

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly…

Yes, the correct replacement lid cover for your MaxxFan Plus Roof Vent w/ 12V Fan part #MA00-04500K (4951KS) is the Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents part #MA10A40009K.

Actually the type of roof vent cover you need to attach to the vent cover brackets of your Maxxair 4951KS like part #MA00-04500K is the part #MA00-955003 which uses those brackets with the included cotter pins of the cover.

I&…

We have actually spoken with Ventline regarding your model AS-13 M-VD0449 in the past and they have confirmed that the correct replacement cover is the part #BVD0449-A03 in Smoke or #BVD0449-A01 in White. The cover measures 14 inches x 14 inches…

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

We have two options of replacement vent covers for the V2094 model, the white dome assembly, #BVD0449-A01, and the #BVD0449-A03 for smoke. These work for Ventline Ventadome roof vent models V2092, V2094, V2119, and V2128 after 2008. Pre 2008,…

While I have no way to see exactly what leveling system you have on your 2006 Tiffin Phaeton 35DH, I was able to find information on a forum showing someone who did confirm the SnapPad HiWay 10 Jack Pads for HWH and Atwood Leveling Systems w/…

LaSalle Bristol RV Plumbing Roof Vent #34474558B is made to fit on RV pipes with an outside diameter of 1-1/4-inches or 1-1/2-inches. The actual hole diameter through which the RV vent pipe will extend measures 1-7/8-inches as shown in the photo I…

The Dometic Ultra Breeze Trailer Roof Vent Cover part #DMC38FR installs using brackets which secure to the vent lid flange. The brackets are screwed into the roof but the cover is attached to the bracket using pins and is easily removeable. I have…

Hey Dave, yes the High Pointe Convection Microwave our part number #HP99ZR is the exact same as the part number you are looking for so this would be exactly what you are looking for as a replacement.

It sounds like there is an electrical short on your trailer wiring that is activating your left rear brake assembly and that is why the brake continues to drag and get hot. Since you have swapped the brake assembly out and still had the problem you…