Replacement Motor for Ventline V2044 RV Fan

Question

Question:

Hello, I need a replacement motor for a Philips Industries, Ventline Division Model V2044 Exhaust fan. Will model #BCD0390-01 work as a replacement? Thank you.

asked by: Eskild A

0

Expert Reply:

Replacement 110-Volt AC Fan Motor # BCD0390-01 is the motor for Ventline Roof Vent # V2128SP-01.

The motor you need for your Ventline # V2044 is # BCD0314-00 if you have the 100 CFM model or # BCD0390-01 if you have the 75 CFM model.

expert reply by: Charles S

0

Michael C.

3/10/2020

NEED 120 VOLT MOTOR FOR MODEL V2045 BATHROOM EXHAUST FAN..WHAT IS THE PART NO. IS IT AVAILABLE?

Reply

Chris R.

3/11/2020

The right replacement 120V motor for your V2045 model vent fan is the part # BCD0390-00 and it is readily available.

Helpful Links

Accessories-and-Parts/Ventline/BCD0390-00.html

Reply

Answer 1

The Ventline V2044 Bathroom Ceiling Vent can use the Replacement 110-Volt AC Fan Motor for Ventline RV Bathroom Insert Fan w/100 CFM Capacity #BCD0314-00 or the Replacement Fan Motor for Ventline Exhaust Fan #BCD0390-00. We have confirmed with…

view full answer...

Answer 2

The diameter of the Replacement Lens for Ventline Lighted Breeze 360 Bath Fan, part #VC0392-00 is 7.9 inches. I have attached a photo of the lens with the dimension shown you can check out.

view full answer...

Answer 3

Most likely yes since the Landing Gear Set part #RVLG-8000 is a very universal kit designed to fit the majority of fifth wheel trailers out there but you'll have to measure the mounting brackets that are on your trailer currently and compare them…

view full answer...

Answer 4

The Replacement Fan Blade for Ventline Bathroom Ceiling Vents - 6-1/2" Blade #BVA0312-00 should be installed so that the fan blades push the air outside. This is for a bath exhaust fan so you don't want the fan blades just recirculating…

view full answer...

Answer 5

I spoke to my contact at Ventline and they informed me that if your Ventline Fan Model 2044 has a 100 CFM motor then you would need to use part #BCD0314-00 but if it has a 75 CFM motor then you will need to use part #BCD0390-01. If you are unsure of…

view full answer...

Answer 6

The correct replacement motor you need for the Philips/Ventline RV vent part number V2044 is the part #BCD0390-00 that you mentioned. We've confirmed this as the correct fit. The #BCD0314-00 fits the 75 CFM versions of the vent like you have…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...