16" Weld-On Bracket Kit for Draw-Tite Class V Ultra Frame Service Body Trailer Hitch

See what our Experts say about this Draw-Tite Accessories and Parts

• Recommended Hitch for Turtle Top Van Terra Built on 2000 E350
  For what you are describing, I think the best option is to use the Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube, # 41990; this is a 2" receiver Class V hitch. this is to be welded in to place using either the 16" Weld-On Bracket Kit for Draw-Tite Class V Ultra Frame Service Body Trailer Hitch, # 4916 or, the 7" version, # 4907. This will provide you with a Class V hitch and multiple placement options best fit your needs. If I follow correctly your last statement of the...
  view full answer...
• Availability of Class V Trailer Hitch for 1990 Ford E-350 with Ambulance Body
  The best option for a trailer hitch that can install on your 1990 Ford E-350 with an ambulance body is a weld-on hitch like the Draw-Tite Class V # 41990. You will just need to add either the 7 inch drop brackets # 4907 or the 16 inch brackets part # 4916. I do recommend having the installation done by a qualified professional welder. Because of the lower body at the rear of ambulance models there isn't a traditional bolt-on custom hitch available that is confirmed to fit. I have attached...
  view full answer...
• Availability of Trailer Hitch that Could Fit 1997 GMC Cutaway Box Truck
  I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a box-truck body like yours are multi-fit RV hitches like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916.
  view full answer...
• High Capacity Trailer Hitch Recommendation for 2005 Class C Jayco RV
  I spoke to my contacts at Curt and Reese and the best option would be the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916 depending on the dimensions of your setup. You should note that just because the hitch has a 16k capacity that does not mean you can tow 16k. You would need to determine the towing capacity of the RV and go by the lowest rated component. This is a multi-fit...
  view full answer...
• Suggested Trailer Hitch for 2013 2500 Chevy Silverado With a Service Bed
  With utility/service beds not sitting the same way as a stock bed, we cannot guaranty the B&W # BWHDRH25600 will fit. That being said, we do still have another option available. The Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube # 41990 can be paired with either 7 inch bracket # 4907 or the 16 inch bracket # 4916. This hitch is still rated up to 16,000 pounds so you will not be downgrading to a lesser hitch. Though I do need to mention that this cannot be used with weight...
  view full answer...
• Solution for Front Trailer Hitch Receiver for 2001 Nissan Frontier
  Since there is no custom fit front hitch available for your 2001 Nissan Frontier the only option would be a universal weld-on hitch like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990. This hitch fits vehicle frames up to 44". You can use the 7" # 4907 or 16" # 4916 mounting brackets, or have some fabricated specifically for your truck. There is also the option to get the hitch with the brackets with the # 41990-07 or # 41990-16. We recommend taking it to a certified...
  view full answer...
• Hitch Recommendation for Custom Fit Application
  If you have a cab and chassis truck with a 34 inch wide trailer frame (measured from outside to outside) then the # C15845 would line up enough to allow you to drill holes and install it. The top of the hitch opening will measure 6 inches from mounting surface of your vehicle. If your vehicle frame isn't 34 inches a better solution would be the multi-fit hitch part # 41990 that has a 16k capacity and either the 7 inch drop brackets part # 4907 or # 4916 for 16 inch drop.
  view full answer...
• Hitch Recommendation for a 2002 Chevy Silverado with a Service Body
  I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body truck like yours are multi-fit RV hitches like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916.
  view full answer...
• Availability of a Receiver Hitch for a 1964 Dodge D-100 Pick-Up
  I checked with all three of the hitch manufacturers that we do business with and they do not produce a custom fit hitch for the 1964 D-100 Dodge pick-up. Your best option would be to measure down from the frame and determine how low the hitch needs to sit to clear the bumper and then use a weld on hitch with the proper size brackets. We have the Class IV Weld-On Ultra Frame Trailer Hitch Receiver, item # 41990, that can be used with either the 7 inch Weld-on Bracket Kit for Class IV Ultra...
  view full answer...
• Hitch Recommendation for a 2005 Morgan Olson Workhorse
  I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a box truck like yours are multi-fit hitches like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916.
  view full answer...
• Availability of Trailer Hitch to Fit Behind Roll Pan of a 1999 Chevy K2500
  I have an option for you, but we do not have a custom made hitch that will fit behind the roll pan of your 1999 K2500. You would want a multi-fit RV hitches like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916.
  view full answer...
• Trailer Hitch for 2002 Thomas Saf-T-Liner Bus
  There is a way for you to add a trailer hitch to your 2002 Thomas Saf-T-Liner bus although there are none mounted vertically onto the frame, they will use brackets to mount to the frame which can be bolted or welded on. What you need is the Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube # 41990 so long as your bus has a frame which is up to 44" wide, because that is the length of this crosstube. You will then use either the 7" Bracket Kit or 16" Bracket Kit. To determine...
  view full answer...
• Hitch and Wiring Recommendation for a 1998 Dodge Ram 3500 with Mason Dump Body
  We have nothing specifically designed to fit the Mason dump body for your 1998 Dodge Ram 3500, but I may have a solution for you. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body truck like yours are multi-fit RV hitches like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916. You will need to start with a 4-way (if...
  view full answer...
• Trailer Hitch for a 2005 Freightliner MT45
  While we do not have a custom fit hitch for your Freightliner MT45 we do have several heavy duty weld-on hitches that could work for you. I have included a link to all of them for you. Based on your frame width you could use # 41990 which is 44 inches long. Then for brackets you could use 7 inch brackets # 4907 or 16 inch brackets # 4916. If the frame is an I-beam frame then the only option is # 13703. Weld-on hitches should only be installed by qualified professional welders. I have...
  view full answer...
• Trailer Hitch Solution for 1983 Chevrolet G30 Box Van
  Since your truck has a box van on it there is a solution for installing a hitch, but a custom fit one like the # C13016 would not work. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a box van like yours are multi-fit RV hitches like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916.
  view full answer...
• How to Determine if 7 or 16 Weld-On Trailer Hitch Brackets Will Fit 2006 Ford E-350 Service Body
  When installing the Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube # 41990 on your 2006 Ford E-350 with the service body it is really just a matter of determining what will fit and if both do which one will fit better. I have attached photos with dimensions for both the 7" # 4907 and 16" # 4916 weld-on brackets that you can check out. You can use these to compare them with your vehicle and determine which brackets are better for your application.
  view full answer...
  
• Recommended Trailer Hitch for 1995 GMC P3500
  I do have a great option for you, however the Draw-Tite Max-E-Loader Trailer Hitch Receiver # 41121 isn't going to fit your 1995 GMC P3500. This particular hitch is designed for certain model years of the Chevy and GMC full size van and it's not going to line up to the frame rails of your P3500. There isn't a similar custom hitch available for your vehicle so your best option is to go with a universal weld-on unit like the Draw-Tite # 41990 paired with the 7" # 4907 or 16" # 4916 Weld-On...
  view full answer...
• Can Draw-Tite Service Body Trailer Hitch Cross Tube # 41990 be Installed Upside Down
  Yes, you can install the Draw-Tite Ultra Frame Service Body Trailer Hitch # 41990 upside down. I spoke with my contact at Draw-Tite and he said that the top and bottom portions of the crosstube are identical in terms of construction/steel thickness so this won't be an issue at all. You will just want to make sure that with it mounted in this orientation on your vehicle that you will still have access to the safety chain loops so you can easily attach the chains. This heavy-duty weld-on...
  view full answer...
• 2016 Ford F-550 Cab and Chassis TorkLift SuperHitch Magnum Trailer Hitch Recommendation
  While we do not have technical drawings of the TorkLift SuperHitch Magnum Trailer Hitch Receiver Class V # TLF1003-30 available I can guarantee that this hitch will fit your 2016 Ford F-550 Cab and Chassis as it has been listed as a confirmed fit. I also attached a review video for you to check out as well. If you have a service body on your truck and are looking for something that could install you would most likely need to go a different route. I spoke to my contacts at Curt and Reese...
  view full answer...
• Which Hitch Will Fit a 2004 E-350 Cab and Chassis with 14 Foot Box Truck Body
  For a 2004 Ford E-350 Cab and Chassis the Draw-Tite # 41906 is a custom fit, but you will need to make sure that the bolt holes are 38-5/8 inches from frame to frame in order for it to fit your particular model. While this hitch is a custom fit for the E-350 cab and chassis, it's possible that your box truck body may not have that hole spacing on the frame so you will want to confirm this. I've linked an installation video that can be used as a rough guide, since we don't have any videos...
  view full answer...
• High Capacity Hitch Options for Class C RV on 2003 Ford E450 Van Cutaway Chassis
  We do have a hitch solution that would work for you, but it's a weld-on hitch, part # 41990. The hitch has a 16000 lb towing 1600 lb tongue weight capacity, which wouild be limited by the towing capacity of your E450 if its capacity is lower. You would also need mounting brackets that are long enough so the receiver tube clears the underside of the rear bumper. To determine which bracket set you need, you'd need to measure downward from the top of the frame member until you clear the lowest...
  view full answer...
• What Towing Setup Would Work For My 2012 Mercedes Sprinter
  When installing there is a few parts you would need to start the installation. For the vehicle side you would need to start with part # 118650 which would give you the beginning 4 flat plug. From the 4 flat plug you would need part # ETBC7 which would make the 4 flat into a 7 round, and also giving you the additional wiring needed to activate your trailer brakes. On the trailer side part # HS381-9000 would provide the attachment to plug into the ETBC7. For the brake controller part #...
  view full answer...
• Can the Class IV Weld-On Ultra Frame Trailer Hitch be Used on a 1987 Isuzu Pickup
  The Class IV Weld-On Ultra Frame Trailer Hitch Receiver by Draw-Tite, Hidden Hitch and Reese, item # 41990, is a weld on application and it is possible that the hitch could work on your vehicle. You would need to measure the width of your vehicle frame and consult a qualified Weldor to determine if the frame on your vehicle is strong enough to weld the hitch to. He will also need to determine if the frame configuration will accept the hitch in the proper orientation for towing. Along with...
  view full answer...
• Receiver Hitch For 2014 Newmar Canyon Star Motorhome At Least 6,000 lb. GTW
  The Curt Adjustable Trailer Hitch Receiver, Class III - 2", # C13701 that you link to, has a maximum gross trailer weight rating of 5,000 lbs. However, this is increased to a maximum GTW of 6,000 lbs. when used with weight distribution system. My first suggestion is that prior to changing out current hitch, identify with Newmar if the factory installed hitch has similar rating as this may meet your needs. The two Curt Trailer Hitches, # C13702 and # C13701, are both rated the same with...
  view full answer...

Do you have a question about this Accessories and Part?