Receiver Adapter for Blue Ox Allure Tow Bar - 2" x 2" Trailer Hitch Receiver

Video Transcript for Review of Blue Ox Receiver Adapter For Allure Tow Bar - BX88249

Hi, everybody. Andy here with etrailer.com. And today, we're gonna take a look at this receiver adapter for the Blue Ox Allure tow bar. Now, if you have the Blue Ox Allure non-binding tow bar with the lunette ring and you wanna connect that tow bar to your RV's two-inch trailer hitch receiver, then this is the adapter that you are going to need. On your screen, I am including our item number to that Allure tow bar for your reference. And this adapter is going to replace the lunette ring on your Blue Ox Allure tow bar.

You're just gonna remove your lunette ring and use the existing hardware to install this adapter on your tow bar. Now, your tow bar will then have the ability to connect directly to your RV's two-inch trailer hitch receiver. And as you have no doubt already noticed, this adapter features three swivel points that will allow for easy hook up and smooth operation. So, it's not going to be as noisy as your lunette ring connection. Now, a pin and clip are included.

And to give you an idea of the size of this and if this is going to fit your application, let me go ahead and give you some measurements. And what I'm gonna do is I'm gonna be measuring from our weld here to these hitch pin holes. So, let me go ahead and line up my tape measure there. And so, from the weld to our first hitch pin hole, we are sitting right at 9 1/2 inches. And then to our second hitch pin hole, we are sitting right at 11 1/2 inches.

So, that should give you plenty of clearance between your RV's receiver and your flat tow setup. And then to give you an idea of just the overall size of this, I'm gonna be measuring from our mounting hole to our hitch pin hole. So, I'm gonna lay my tape measure up there. And so, as you can see, from the mounting holes to our first hitch pin hole, we're right at about 18 inches long. And then to our second hitch pin hole, we're right at about 20 inches long.

So hopefully, that'll give you an idea of the size of this and then kind of give you an idea of the clearance as well. So again, this is going to be a very easy installation. Speaking of installation, you are gonna get some installation instructions. And that's going to conclude our look today. I do hope that it was very helpful for you. Again, my name is Andy. Thank you for joining me..