bing tracking image
  1. Accessories and Parts
  2. CURT
  3. Tow Bar
  4. Hitch Adapters
  5. High-Low Adapter
  6. 4 Inch Rise/Drop
Curt High-Low Adapter for Tow Bars - 2" Hitches - 4" Rise/Drop - 8" Long

Curt High-Low Adapter for Tow Bars - 2" Hitches - 4" Rise/Drop - 8" Long

Item # C59KR
Retail:$88.99
Our Price: $53.44
You Save: 40%
Accessories and Parts
Shipping Weight: 10 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Achieve the proper height for your tow bar setup with this drop/rise hitch adapter. Provides either a 4" rise or a 4" drop to make up the height difference between your RV and towed vehicle. Rated at 7,500 lbs. 1-800-940-8924 to order CURT accessories and parts part number C59KR or order online at etrailer.com. Free expert support on all CURT products. Great prices and Fastest Shipping for Curt High-Low Adapter for Tow Bars - 2" Hitches - 4" Rise/Drop - 8" Long. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (77)
  • Q & A (0)
  • Photos

CURT Accessories and Parts - C59KR

  • Tow Bar
  • Hitch Adapters
  • High-Low Adapter
  • CURT
  • 4 Inch Rise/Drop
  • Fits 2 Inch Hitch

Achieve the proper height for your tow bar setup with this drop/rise hitch adapter. Provides either a 4" rise or a 4" drop to make up the height difference between your RV and towed vehicle. Rated at 7,500 lbs.


Features:

  • Allows for proper positioning of tow bar
    • Makes up for height difference between RV's hitch and towed vehicle's base plates
  • Can be used in either rise or drop position
  • Constructed of sturdy steel
  • Resists rust and corrosion with durable powder coat finish
  • Made in the USA


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Rise/drop: 4"
  • Receiver size: 2" x 2"
  • Maximum weight capacity: 7,500 lbs
  • Length (pin hole to pin hole): 8"
  • Limited lifetime warranty


'dimensions

Note: Designed for flat towing only. Do not use to tow a trailer.


Many tow systems require some sort of hitch accessory to either raise or lower your tow bar so that it sits level. To determine if your setup needs an adapter, hook the tow bar up to your rv and towed car and measure to see how close to level it is. The "safe zone" for a motor-home-mounted tow bar ranges from 3 inches above level to 3 inches below. Car-mounted models must be absolutely level. This high-low adapter can provide you with the necessary drop or desired rise to achieve a level tow bar setup.



45798 Curt Hi-Lo Drop Receiver - 4" Drop/Rise





Customer Satisfaction Score:


Customer Reviews

Curt High-Low Adapter for Tow Bars - 2" Hitches - 4" Rise/Drop - 8" Long - C59KR

Average Customer Rating:  4.8 out of 5 stars   (77 Customer Reviews)

Achieve the proper height for your tow bar setup with this drop/rise hitch adapter. Provides either a 4" rise or a 4" drop to make up the height difference between your RV and towed vehicle. Rated at 7,500 lbs.

by:

The hitch adapter is holding up very well after thousands of miles of towing my Jeep with the RV. Very satisfied with the choice.



by:

Works as it should. I wish it had the ability to put a bike rack in the other slot though.



by:

I bought the drop hitch for my bike rack as the ramp would be not as steep. As far as the unit, I would have liked having the lower tube further back on the upper tube so it doesn't stick out so far. When I park in a parking lot I have to fold the bike rack up as otherwise it sticks out far enough that it might get hit by a passing vehicle.



by:

Just right drop



by:

etrailer shipping was prompt and the base plate was received in a few days. I installed these myself in one day. I have not yet towed the Maverick but I do not foresee any problems. I chose the Blue Ox base plate over the RoadMaster because the RoadMaster required extensive modification to the Active Shutters. The Blue Ox instructions skip some details that end up taking time to resolve. There are clips holding the fascia to the fender that broke when I pulled the fascia, maybe they could have been released from the inside before pulling. There is a black box on the driver's side frame that has to be temporarily removed to install the base plate. The base plate bolt interferes with installation of the black box. I bent the black box bracket to get it to fit but now the box contacts the marker lamp on the fascia (I'll have to watch for future wear/damage). Cutting holes in the fake fog lamps was time consuming as there is a lot of guess work about the location. Although the instructions say start cutting holes for the tow tabs, it's the safety chain connections that are challenging. The problem is trying to hold the fascia up in position while the base plate pushes it away from the truck. The cutouts end up being a little crude but not really noticeable in the grand overview.



by:

I would recommend 2 anti-raddle clams to keep your riser and tow bar extremely ridged. This is a good solution if your toad and Motor home hitch are not level.



by:

Trevor went beyond the required, shipped item out same day while I was returning the item I incorrectly ordered. Item already installed on the motorhome.



by:

Received the hi lo hitch adapter, looks good. Outstanding delivery service delivered days ahead of time. When I ordered this, a trailer suggested it would be close to a week. I received my tow bar hitch in three days and received the Hilow adapter in four days. Outstanding service.

Glenn

9/26/2021

Works great, no issues. I’ve inspected the unit, pulli roughly 15,000 miles, with no cracks in the welds.



by:

Informative website that helps choose the right product of the many options available. Fast delivery is an added bonus.

Denny B.

12/23/2022

Great-it is working exactly as planned.



by:

It is great. Easy to hookup. Easy to take down. Love it.



by:

Needed a drop hitch but wanted the shortest possible. The Curt fit that bill and has higher load ratings than others.

Etrailer delivery prompt as always.

Robert C.

8/15/2021

Continues service as advertised.



by:

as advertised and shipping was fast. Thank you



by:

I am very satisfied and pleased that all of the components to connect my 2021 Chevy spark were purchased and installed through etrailer. It couldn't have been handled any better.

etrailer is an outstanding source for selection and purchase of related automotive equipment! I highly recommend them.



by:

Item as described and arrived quickly. Needed it for trailer height issues on some yard equipment and it looks to be a perfect height adjustment (and a bit more distance from the back of the tractor). .



by:

sturdy, thanks!



by:

It’s perfect



by:

Great fit, looks great



by:

Purchased to raise my bike rack above my exhaust to avoid damaging the bike tires and rack. Seems to have worked perfectly so far.



by:

Ordered items from Etrailer before and have never been disappointed. Called them a few times with questions and they are always very easy to work with.



by:

Very quick and accurate service. My second purchase with etrailer and I am very happy



by:

Works great



by:

This is a well made product. Weld quality appears perfect, paint quality is good. Delivery in two days.
I'm happy with purchase.



by:

Delivery was fast. Excellent quality. Always easy talking with etrailer with any changes I need done.



by:

As ordered



by:

Does what it's supposed to do and is solid construction!


25
77
Show More Reviews

See what our Experts say about this CURT Accessories and Parts

  • Can The Curt High-Low Adapter Be Used To Tow A Trailer?
    Unfortunately, the Curt High-Low Adapter for Tow Bars # C59KR is not to be used to tow a trailer, and should only be used for hitch mounted accessories. Instead, you'll want to use a ball mount to tow your trailer. For instance, you can use the Draw-Tite Ball Mount # 2753, which has 2-3/4" of rise, and 4" of drop, is 9" long, and is capable of towing up to 7,500-lbs. I recommend using the FAQ I've attached, to help determine the needed rise/drop.
    view full answer...
  • Bumper Clearance on Curt High-Low Adapter # C59KR
    The Curt High-Low Adapter # C59KR should work for giving you ground clearance for your cargo carrier. The measurement from the shank hitch pin hole to the back end of the top receiver is 5-1/2", which should be enough clearance for your bumper. Refer to the diagram attached below and measure your hitch setup to make sure. Note this adapter does not come with a hitch pin and clip. If you need one, I recommend the Curt # C21510. Check out the videos linked below for more details on these...
    view full answer...
    Image 1 for
  • High Low Adapter for Flat Towing 2013 Honda CR-V
    Hey Richard, it sounds like you are looking for a high low adapter for when you will be flat towing your 2013 Honda CR-V. So the Blue Ox base plate kit part # BX2258 that fits your vehicle has a bracket height of 15-1/2 inches so you'd want an adapter that drops right at 5 inches or so. Keep in mind if you are within 3 inches of level you are okay at that point. For that the Curt part # C59KR would work great as it can provide a drop of 4 inches. We do ship to Canada as well ay.
    view full answer...
  • Does the Curt High-Low Adapter Work w/ the Falcon All Terrain Tow Bar
    Yes, the Curt High-Low Adapter for Tow Bars item # C59KR can be used with the Roadmaster Falcon All Terrain, Non-Binding Tow Bar item # RM-522. The high-low has a maximum weight capacity of 7,500 lbs.
    view full answer...
  • 4 inch Hitch High Low Adapter with Hitch Lock
    For a high low adapter with a 4 inch drop you could use the part # C59KR and then you could use the hitch lock part # e99047 that you referenced as well.
    view full answer...
  • High-Low Adapter That Is 8 Long And Has A 4 Rise/Drop
    Yes we do, we have the: -Curt High-Low Adapter for Tow Bars # C59KR This high-low adapter features a 4" rise/drop, fits into a 2" x 2" trailer hitch, is 8" long, and has a maximum weight capacity of 7,500-lbs. If you're looking for a high low adapter that has 8" rise/drop, the only one we offer is the Roadmaster High-Low Adapter for Tow Bars # RM-048-8.
    view full answer...
  • How Much Rise/Drop Does The etrailer SD Non-Binding Tow Bar Have
    Yes, the etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates # e47ZR would have enough adjustability between the 1-1/2" shank rise/drop and the 3" of tilt to meet your 4" difference. I've attached a video below where Dave will go over how to adjust this tow bar to fit your application. If you wanted to use a high/low adapter you could use the Curt High-Low Adapter for Tow Bars # C59KR, which has a 4" rise or drop.
    view full answer...
  • Is Curt High-Low Adapter Rated for Accessories
    The Curt High-Low Adapter # C59KR is designed for flat towing only. Curt doesn't even test it for accessories to give it a tongue weight rating. The Roadmaster # RM-048-4 is the most comparable with a distance of 9-5/8" from hitch pin to hitch pin hole and a 4" drop/rise. This has a 400 lb tongue weight capacity. However, use of an adapter is going to cut the capacity of your hitch by 50% so you won't be able to use the full capacity of the cargo carrier. The 24x60 Curt Cargo Carrier #...
    view full answer...
  • Does Use of High Low Adapter When Flat Towing Require Longer Umbilical Adapter
    The additional length added by the Curt High Low Adapter # C59KR that you referenced would not cause a 6 foot 6-way to 7-way adapter to be too short. I am not totally sure which you had in mind but we do have the Blue Ox part # BX88206 which is coiled and can expand to 7 feet. Since the coils are basically spring loaded it keeps tension in the adapter to prevent it from dragging.
    view full answer...
  • Blue Ox Baseplate And Complete Flat Towing Setup For A 2015 Ford Fiesta
    Every base plate that we offer, like the: - Blue Ox Base Plate Kit # BX2622 that you were checking out, attaches to the bumper frame of the vehicle. However most likely what you have surface rust on your 2015 Ford Fiesta, and isn't anything to worry about, but to be completely sure you can either take ball-peen hammer and tap away some of the rust to see if it's thinned out, or, you can take it to your local mechanic shop and have them inspect it. If you're interested in a complete...
    view full answer...
  • What 4-Bike Bike Rack do You Recommend for My 2021 Hyundai Palisade?
    I have a great solution for you. I confirmed with Curt that they do not have a tongue weight rating for the Curt High-Low Adapter for Tow Bars - 2" Hitches - 4" Rise/Drop - 8" Long # C59KR because this adapter is recommended to use for flat-towing applications only. With that being said, the Curt High-Low Adapter # C59KR only has a tested gross towing weight capacity of 7,500 pounds. However, if you want a great adapter alternative that has been tested for its tongue weight capacity, I...
    view full answer...
  • Flat Tow Set Up For 2022 Chevrolet Colorado Z71
    Great question. The main things you need are a Base plate, Tow Bar, Safety Cables, Braking system, Wire harness and possibly a HI-Lo adapter. I will list my recommendations below. I recommend the Blue Ox Base Plate Kit - Removable Arms # BLU93FR. The Blue Ox Ascent Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 7,500 lbs # BX4370. This comes with safety cables. The Demco SBS Stay-IN-Play DUO Supplemental Braking System - Proportional # SM99251. Then Roadmaster Diode 7-Wire to 6-Wire...
    view full answer...
  • Flat Tow Setup For 2010 Honda CRV
    We have everything you need. There are five major components to complete a flat-tow setup. You need a baseplate, tow bar/safety cables, braking system and high-low adapter. First I recommend the etrailer Invisible Base Plate Kit - Removable Arms # e98956. Next the Blue Ox Alpha 2 Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 6,500 lbs # BX7380. This model comes with safety cables. Now lets go with the Brake Buddy Classic 3 Portable Supplemental Braking System # HM39494. This will...
    view full answer...
  • Will The Blue Ox BX1110 Base Plate Fit With The Blue Ox Tow Bar BX7380
    Yes, the Blue Ox Base Plate Kit - Fixed Arms # BX1110 and the Blue Ox Alpha 2 Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 6,500 lbs # BX7380 will fit together perfectly. If you are going to be flat towing you will also need a braking system like the Brake Buddy Select 3 Portable Supplemental Braking System - Proportional # HM39524. A Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord # RM-152-98146-7. This will keep you lights synced up...
    view full answer...
  • Complete Flat Towing Setup For A 2000 Honda CR-V With A ReadyBrute Tow Bar
    Sure thing! Along with your ReadyBrute tow bar, you're also going to need a base plate if you don't already have one. If you don't the Roadmaster Crossbar-Style Base Plate Kit # 1528-3 with the adapter # RM-032 will work great for your 2000 Honda CR-V. Next, you're going to need a braking system. I recommend taking a look at the Brake Buddy Select 3 Portable Supplemental Braking System # HM39524. I like this system because it is lightweight, portable, and easy to setup. Continuing,...
    view full answer...
  • Complete Flat Towing Setup For A 1997 Jeep Wrangler
    The braking used on a trailer with a brake controller is different than the brakes needed when flat towing a vehicle, so you will not be able to use your brake controller, unfortunately. Instead, I recommend using the Brake Buddy Select 3 Portable Supplemental Braking System # HM39524. This is going to be the easiest system to set up and use. The remainder of the parts needed is the: -Base plate -Tow Bar -Tow Bar Wiring -Safety Cables -High-Low Adapter. For a base plate, the etrailer...
    view full answer...
  • Complete Flat Towing Setup For A 2007 Chevrolet HHR With A Roadmaster Falcon Tow Bar
    For your 2007 Chevrolet HHR, the base plate you'll need is the Blue Ox Base Plate Kit # BX1692. Since this is a Blue Ox base plate and you're using a Roadmaster tow bar, you're also going to need the adapter # RM-031 to be able to use the two components together. If you're needing the complete flat towing setup, you're also going to need wiring # RM-15267, a braking system # HM39494, the Roadmaster FuseMaster Fuse Bypass # RM76511, and more than likely a high-low adapter # C59KR. Additionally,...
    view full answer...
  • Base Plate And Flat Tow Set Up For 2021 Ram 1500 Eco Diesel
    Yes, the Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-522203-5 is a confirmed fit for your 2021 Ram 1500 Ecodiesel. If you need the rest of the flat tow package I suggest going with these items. The Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar w/ LED Lights - RV Mount - 8K # RM-676. This will connect to the base plate and into the RV hitch receiver. Safety cables included. The Roadmaster BrakeMaster System w BrakeAway for RVs w Air or Air Over Hydraulic Brakes...
    view full answer...
  • D-Ring Rugged Ridge XHD Bumper Flat Tow Set Up For 2013 Jeep JK
    We have what you need. I will list them below for you. The Blue Ox Aftermarket Off-Road Bumper Adapter - 7/8" Pin # BX88357 for your 1 inch D-rings. The etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates - RV Mount - 2" Hitch - 6,000 lbs # e47ZR. The Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor - Proportional # DM86VR. The Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord # RM-152-98146-7. The Curt High-Low...
    view full answer...
  • Flat Tow Set Up For 2022 Chevy Colorado
    For a first time flat tow all the information and requirements can seem overwhelming but lets go step by step and see how simple it and safe it actually is. First you need a base plate. This offers a secure mating/connection point to your vehicle. I recommend going with the Blue Ox Base Plate Kit - Removable Arms # BLU93FR. Next you need an actual tow bar, I recommend the Blue Ox Avail Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 10,000 lbs # BX7420. It does come with safety cables...
    view full answer...
  • Complete Flat Towing Setup For A 2018 Jeep JL Wrangler
    Thanks for reaching out, I'll break it down into the main parts that will fit your 2018 Jeep JL Wrangler below: -You'll first need a base plate, like the etrailer Invisible Base Plate Kit # e98948, and a tow bar compatible with your base plate that also has the capacity to tow your vehicle, like the etrailer SD Non-Binding Tow Bar # e34ZR. -Next, you'll need a braking system, the Demco SBS Stay-IN-Play DUO Supplemental Braking System # SM99251 is a great option with a one time install,...
    view full answer...
  • Crossbar Style Base Plate For Flat Towing A 2011 Jeep Wrangler With Standard Bumper
    We have what you need. The Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # RM-521448-4 will work with the etrailer XHD Non-Binding Tow Bar for Roadmaster Crossbar Base Plates - 2" RV Mount - 10,500 lbs # e64ZR. You will also need a few more items to complete the set up. I will list them out for you. You need the Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor - Proportional # DM86VR. This will keep you safe and legal. You need to sync your...
    view full answer...
  • Complete Flat Towing Setup That Fits A 2017 GMC Acadia
    For a complete towing setup for your 2017 GMC Acadia, you're going to need a base plate, a braking system, a tow bar, tow bar wiring, and a high-low adapter. For a base plate, I recommend the Roadmaster Direct-Connect Base Plate Kit # RM-523189-5. This base plate kit is simple to install, easy to use, and will provide your vehicle with a nice, clean look when not in use. Following a base plate, you'll need a tow bar that is compatible with the base plate, and will be able to support the...
    view full answer...
  • Recommended Blue Ox Base Plate Kit for a 2023 Ford Bronco
    For a Blue Ox compatible base plate kit that works with your 2023 Ford Bronco, you will need the Blue Ox Base Plate Kit item # BLU23XR. This kit is custom fit and comes with everything needed to install it on your Bronco. These attach in the same place where your recovery hooks are located. The base plate replaces the recovery points which are not rated to be used for flat towing. I have attached a picture below so you can see what they look like installed. The tow bar needs to be within...
    view full answer...
    Image 1 for


< Previous
12



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Jacob T
Video Edited:
Jacob T
Employee Wilson B
Updated by:
Wilson B
Employee Jonathan Y
Video by:
Jonathan Y
Employee Kristina F
Written by:
Kristina F
Employee Clayton O
Test Fit:
Clayton O

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.