Does the Curt High-Low Adapter Work w/ the Falcon All Terrain Tow Bar

Question

Question:

Will this work with a Roadmaster Falcon All terrain Non Binding RM522 tow bar?

asked by: Art

0

Expert Reply:

Yes, the Curt High-Low Adapter for Tow Bars item # C59KR can be used with the Roadmaster Falcon All Terrain, Non-Binding Tow Bar item # RM-522. The high-low has a maximum weight capacity of 7,500 lbs.

expert reply by: Jerred H

0

Answer 1

For your 2007 Chevrolet HHR, the base plate you'll need is the Blue Ox Base Plate Kit #BX1692. Since this is a Blue Ox base plate and you're using a Roadmaster tow bar, you're also going to need the adapter #RM-031 to be able to use the…

view full answer...

Answer 2

For a first time flat tow all the information and requirements can seem overwhelming but lets go step by step and see how simple it and safe it actually is. First you need a base plate. This offers a secure mating/connection point to your vehicle. I…

view full answer...

Answer 3

The Curt High-Low Adapter #C59KR should work for giving you ground clearance for your cargo carrier. The measurement from the shank hitch pin hole to the back end of the top receiver is 5-1/2", which should be enough clearance for your bumper.…

view full answer...

Answer 4

The shank of the Roadmaster High-Low Adapter #RM-076 is hollow so your anti-rattle device that is designed to fit a hollow shank will fit it and work well.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 8

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 12

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Does the Curt High-Low Adapter Work w/ the Falcon All Terrain Tow Bar

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching