Redline Trailer Suspension - Leaf Spring Suspension - 30-6-1 Review Video

Yes, you have the Global Link RV Entry Door Locking Latch Kit part #295-000002 so the correct replacement key for your Wells Cargo Trailer is the Replacement Key for Global Link RV Locks (316) is part #295-000042.

The picture with the torn up bushing looks like the eye of your slipper spring. Is that correct? If so, it is coming undone and probably the reason you're having this problem. It should be enclosed and not look similar to the hook on the end…

For your application I recommend using the 4-Leaf Slipper Spring w/ Hook End for 4,000-lb Trailer Axles #SP-230275. This measures 26-5/8" to the end of the spring but if you check out the attached photo you'll see that it will fit great with…

For a 7/8 inch bolt to use with the #TREQ4541 we only have the part #TRFA71063 which is 4-11/16 inches in length. It may seem a little long but it would still work well. The wet bolts are just as strong as the non-wet bolts we carry.

The Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles - 12" Diameter - 6 on 5-1/2 #8-201-5UC3 are the correct fit for your axles. This will work well for your desired tires and wheels.

I definitely recommend replacing your 3,500 lb 26 inch leaf springs with the 26 inch 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles #e22YR. The 4,500 lb would be too stiff and your ride would suffer so the better option by far are the 4k…

The standard amount of space that we recommend having between the top of your tires and the fender is 4" with your trailer unloaded. If this is shorter for your 2006 enclosed trailer then it is definitely wise to switch something up. The only…

The spring hanger placement is going to be determined by your axle spacing. For example, if your axles are spaced 33 inches apart, as shown in the attached diagram, a 7K axle slipper spring, like #e74SR, requires a distance of 28-1/2 inches between…

For your Tandem 8K axles with 2 inch slipper springs, I recommend the Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers #APT6SE. The hangers are to be welded to your trailer frame and the holes on the top of the…

The number of leaves on a leaf spring is not the only determining factory in the amount of weight it can handle. The thickness of each leaf as well as what the leaf is made out of can affect the weight rating and performance of the spring. The…

The varying heights of the hangers is all designed so that you end up with the leaf springs as level as possible and still end up a desired distance away from the trailer frame. It may seem odd, but the center hanger will stick down further because…

Building a single axle trailer you will need the following items to install leaf springs. I have listed the part numbers for the PR626 Springs next to the items needed. 2 Springs - #e27SR 2 Front Hangers - #115917, 1-1/2 inch tall or #28-5, 3-1/4…